From patchwork Mon Apr 11 02:28:19 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: lkml2017@openmailbox.org X-Patchwork-Id: 8796011 X-Patchwork-Delegate: kvalo@adurom.com Return-Path: X-Original-To: patchwork-linux-wireless@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id A7302C0553 for ; Mon, 11 Apr 2016 02:28:52 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 85F1220225 for ; Mon, 11 Apr 2016 02:28:50 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 08DDB20166 for ; Mon, 11 Apr 2016 02:28:48 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1750955AbcDKC2b (ORCPT ); Sun, 10 Apr 2016 22:28:31 -0400 Received: from mail2.openmailbox.org ([62.4.1.33]:35132 "EHLO mail2.openmailbox.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750837AbcDKC23 (ORCPT ); Sun, 10 Apr 2016 22:28:29 -0400 Received: by mail2.openmailbox.org (Postfix, from userid 1004) id 44E9C2ACB03B; Mon, 11 Apr 2016 04:28:26 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=openmailbox.org; s=openmailbox; t=1460341705; bh=kdUiCCeblVRYIpTgtVL7E0GWeSD9i9mPW3AHpHPv3Mg=; h=Date:From:To:Cc:Subject:In-Reply-To:References:From; b=Cx6UtlrFLzkE1WPPEUpHcsUG3Ty72Bs9KTuRgzv6jSRqh0dhPbjmyYBCLTnApL5qG Kj1QBNMr+yczcANxxwf6sU+ccFvgcZ7uKjT5vF0yhgKBQFVCjnPHYeUakBmDxHenpd 9fX6H++m6BXKsdDMxrkuFZvOVmHsO+9nn6sk/K9A= X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Spam-Level: X-Spam-Status: No, score=-7.0 required=5.0 tests=BAYES_00,DKIM_ADSP_ALL, DKIM_SIGNED, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, T_DKIM_INVALID, UNPARSEABLE_RELAY autolearn=ham version=3.3.1 Received: from www.openmailbox.org (openmailbox-b2 [10.91.69.220]) by mail2.openmailbox.org (Postfix) with ESMTP id 500582ACB066; Mon, 11 Apr 2016 04:28:20 +0200 (CEST) MIME-Version: 1.0 Date: Mon, 11 Apr 2016 02:28:19 +0000 From: Gustav Frederiksen To: Julian Calaby Cc: linux-wireless Subject: Re: [PATCH] Revert regression in ath9k on AR9281 In-Reply-To: References: <998e52a27823047910627da08e917c06@openmailbox.org> Message-ID: <6567cc33c0ca681364c6510a7797c459@openmailbox.org> X-Sender: lkml2017@openmailbox.org User-Agent: Roundcube Webmail/1.0.6 Sender: linux-wireless-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-wireless@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Hi, thank you for taking the time to answer my previous email and for providing those useful tips. All the points you made are valid. Especially, the same output of "iwconfig" was indeed pasted twice by mistake. Please find a new and hopefully correct report below this message. The following commit introduced what looks like a regression on AR9281 and supposedly other wireless chipsets using the AR9002 part of the ath9k driver. After this commit the network interface's "Bit Rate" as shown in "iw" drops from the usual 65Mbps in N mode to 11Mbps also in N mode. Throughput tests confirm the slowdown. Applying and removing the commit toggles the problem. Changes contained in ar9002_hw_spur_mitigate() appear responsible for the "Bit Rate" drop. The provided patch reverts the change made by commit "f911085ffa88" to ar9002_hw_spur_mitigate() while leaving other changes unmodified. The patch was obtained as such: "git diff origin/master f911085ffa88~1 drivers/net/wireless/ath/ath9k/ar9002_phy.c" Fixes: f911085ffa88 ("ath9k: split ar5008_hw_spur_mitigate and reuse common code in ar9002_hw_spur_mitigate.") Behavior of ar5008_hw_cmn_spur_mitigate() differs from previous implementation in ar9002_hw_spur_mitigate(). Reverted changes. Signed-off-by: Gustav Frederiksen --- bisection.log Bisecting: 0 revisions left to test after this (roughly 0 steps) [f911085ffa8863c62344876e0ab6073e4258c246] ath9k: split ar5008_hw_spur_mitigate and reuse common code in ar9002_hw_spur_mitigate. f911085ffa8863c62344876e0ab6073e4258c246 is the first bad commit commit f911085ffa8863c62344876e0ab6073e4258c246 Author: Oleksij Rempel Date: Sun May 17 21:49:19 2015 +0200 ath9k: split ar5008_hw_spur_mitigate and reuse common code in ar9002_hw_spur_mitigate. [ar5008 and ar9002]_hw_spur_mitigate have big portion of identical code. This patch will move common part of ar5008_hw_spur_mitigate to ar5008_hw_cmn_spur_mitigate and reuse it in ar9002_hw_spur_mitigate. As noticed by Joe Perches I reuse ar9002_hw_spur_mitigate (const) version of declarations for pilot_mask_reg and chan_mask_reg. There should be no other difference with original code. Signed-off-by: Oleksij Rempel Signed-off-by: Kalle Valo --- --- WITH commit: 11Mbps. root@laptop:~# uname -a Linux laptop 4.2.0-35-generic #40~14.04.1-Ubuntu SMP Fri Mar 18 16:37:35 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux root@laptop:~# iw dev wlan0 link Connected to a4:c7:**:**:**:** (on wlan0) SSID: TEST_AP freq: 2462 RX: 87746 bytes (518 packets) TX: 46813 bytes (246 packets) signal: -47 dBm tx bitrate: 11.0 MBit/s bss flags: short-preamble short-slot-time dtim period: 1 beacon int: 400 root@laptop:~# wget "http://proof.ovh.net/files/1Gio.dat" -O /dev/null --2016-04-11 02:38:10-- http://proof.ovh.net/files/1Gio.dat Resolving proof.ovh.net (proof.ovh.net)... 188.165.12.106, 2001:41d0:2:876a::1 Connecting to proof.ovh.net (proof.ovh.net)|188.165.12.106|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 1073741824 (1.0G) [application/octet-stream] Saving to: '/dev/null' 3% [=> ] 39 762 450 778KB/s eta 23m 15s^C root@laptop:~# iw phy0 info Wiphy phy0 Band 1: Capabilities: 0x11ce HT20/HT40 SM Power Save disabled RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT RX MCS rate indexes supported: 0-15 TX unequal modulation not supported HT TX Max spatial streams: 1 HT TX MCS rate indexes supported may differ Frequencies: * 2412 MHz [1] (27.0 dBm) * 2417 MHz [2] (27.0 dBm) * 2422 MHz [3] (27.0 dBm) * 2427 MHz [4] (27.0 dBm) * 2432 MHz [5] (27.0 dBm) * 2437 MHz [6] (27.0 dBm) * 2442 MHz [7] (27.0 dBm) * 2447 MHz [8] (27.0 dBm) * 2452 MHz [9] (27.0 dBm) * 2457 MHz [10] (27.0 dBm) * 2462 MHz [11] (27.0 dBm) * 2467 MHz [12] (disabled) * 2472 MHz [13] (disabled) * 2484 MHz [14] (disabled) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 max scan IEs length: 2257 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) * 00-0f-ac:10 * 00-0f-ac:8 * 00-0f-ac:9 * CMAC (00-0f-ac:6) * 00-0f-ac:13 * 00-0f-ac:11 * 00-0f-ac:12 Available Antennas: TX 0x1 RX 0x3 Configured Antennas: TX 0x1 RX 0x3 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point * P2P-client * P2P-GO software interface modes (can always be added): * AP/VLAN * monitor valid interface combinations: * #{ managed } <= 2048, #{ AP, mesh point } <= 8, #{ P2P-client, P2P-GO } <= 1, total <= 2048, #channels <= 1, STA/AP BI must match * #{ WDS } <= 2048, total <= 2048, #channels <= 1, STA/AP BI must match Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * remain_on_channel * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * Unknown command (82) * Unknown command (81) * Unknown command (84) * Unknown command (87) * Unknown command (85) * Unknown command (89) * Unknown command (92) * connect * disconnect Supported TX frame types: * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * Unknown mode (10): 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 Supported RX frame types: * IBSS: 0x40 0xb0 0xc0 0xd0 * managed: 0x40 0xd0 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * mesh point: 0xb0 0xc0 0xd0 * P2P-client: 0x40 0xd0 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * Unknown mode (10): 0x40 0xd0 Device supports RSN-IBSS. Device supports AP-side u-APSD. HT Capability overrides: * MCS: ff ff ff ff ff ff ff ff ff ff * maximum A-MSDU length * supported channel width * short GI for 40 MHz * max A-MPDU length exponent * min MPDU start spacing Device supports TX status socket option. Device supports HT-IBSS. root@laptop:~# lspci -vvn 03:00.0 0280: 168c:002a (rev 01) Subsystem: 1a3b:1067 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- ] 365 769 042 7,91MB/s eta 1m 40s ^C root@laptop:~# iw phy0 info Wiphy phy0 Band 1: Capabilities: 0x11ce HT20/HT40 SM Power Save disabled RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT RX MCS rate indexes supported: 0-15 TX unequal modulation not supported HT TX Max spatial streams: 1 HT TX MCS rate indexes supported may differ Frequencies: * 2412 MHz [1] (27.0 dBm) * 2417 MHz [2] (27.0 dBm) * 2422 MHz [3] (27.0 dBm) * 2427 MHz [4] (27.0 dBm) * 2432 MHz [5] (27.0 dBm) * 2437 MHz [6] (27.0 dBm) * 2442 MHz [7] (27.0 dBm) * 2447 MHz [8] (27.0 dBm) * 2452 MHz [9] (27.0 dBm) * 2457 MHz [10] (27.0 dBm) * 2462 MHz [11] (27.0 dBm) * 2467 MHz [12] (disabled) * 2472 MHz [13] (disabled) * 2484 MHz [14] (disabled) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 max scan IEs length: 2257 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) * CMAC (00-0f-ac:6) Available Antennas: TX 0x1 RX 0x3 Configured Antennas: TX 0x1 RX 0x3 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point * P2P-client * P2P-GO software interface modes (can always be added): * AP/VLAN * monitor valid interface combinations: * #{ managed } <= 2048, #{ AP, mesh point } <= 8, #{ P2P-client, P2P-GO } <= 1, total <= 2048, #channels <= 1, STA/AP BI must match * #{ WDS } <= 2048, total <= 2048, #channels <= 1, STA/AP BI must match Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * remain_on_channel * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * Unknown command (82) * Unknown command (81) * Unknown command (84) * Unknown command (87) * Unknown command (85) * Unknown command (89) * Unknown command (92) * connect * disconnect Supported TX frame types: * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * Unknown mode (10): 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 Supported RX frame types: * IBSS: 0x40 0xb0 0xc0 0xd0 * managed: 0x40 0xd0 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * mesh point: 0xb0 0xc0 0xd0 * P2P-client: 0x40 0xd0 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * Unknown mode (10): 0x40 0xd0 Device supports RSN-IBSS. Device supports AP-side u-APSD. HT Capability overrides: * MCS: ff ff ff ff ff ff ff ff ff ff * maximum A-MSDU length * supported channel width * short GI for 40 MHz * max A-MPDU length exponent * min MPDU start spacing Device supports TX status socket option. Device supports HT-IBSS. root@laptop:~# lspci -vvn 03:00.0 0280: 168c:002a (rev 01) Subsystem: 1a3b:1067 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- lower) && (cur_bin < upper)) { + pilot_mask = pilot_mask | 0x1 << bp; + chan_mask = chan_mask | 0x1 << bp; + } + cur_bin += 100; + } + cur_bin += inc[i]; + REG_WRITE(ah, pilot_mask_reg[i], pilot_mask); + REG_WRITE(ah, chan_mask_reg[i], chan_mask); + } + + cur_vit_mask = 6100; + upper = bin + 120; + lower = bin - 120; + + for (i = 0; i < 123; i++) { + if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) { + + /* workaround for gcc bug #37014 */ + volatile int tmp_v = abs(cur_vit_mask - bin); + + if (tmp_v < 75) + mask_amt = 1; + else + mask_amt = 0; + if (cur_vit_mask < 0) + mask_m[abs(cur_vit_mask / 100)] = mask_amt; + else + mask_p[cur_vit_mask / 100] = mask_amt; + } + cur_vit_mask -= 100; + } + + tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28) + | (mask_m[48] << 26) | (mask_m[49] << 24) + | (mask_m[50] << 22) | (mask_m[51] << 20) + | (mask_m[52] << 18) | (mask_m[53] << 16) + | (mask_m[54] << 14) | (mask_m[55] << 12) + | (mask_m[56] << 10) | (mask_m[57] << 8) + | (mask_m[58] << 6) | (mask_m[59] << 4) + | (mask_m[60] << 2) | (mask_m[61] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask); + REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask); + + tmp_mask = (mask_m[31] << 28) + | (mask_m[32] << 26) | (mask_m[33] << 24) + | (mask_m[34] << 22) | (mask_m[35] << 20) + | (mask_m[36] << 18) | (mask_m[37] << 16) + | (mask_m[48] << 14) | (mask_m[39] << 12) + | (mask_m[40] << 10) | (mask_m[41] << 8) + | (mask_m[42] << 6) | (mask_m[43] << 4) + | (mask_m[44] << 2) | (mask_m[45] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask); + + tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28) + | (mask_m[18] << 26) | (mask_m[18] << 24) + | (mask_m[20] << 22) | (mask_m[20] << 20) + | (mask_m[22] << 18) | (mask_m[22] << 16) + | (mask_m[24] << 14) | (mask_m[24] << 12) + | (mask_m[25] << 10) | (mask_m[26] << 8) + | (mask_m[27] << 6) | (mask_m[28] << 4) + | (mask_m[29] << 2) | (mask_m[30] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask); + + tmp_mask = (mask_m[0] << 30) | (mask_m[1] << 28) + | (mask_m[2] << 26) | (mask_m[3] << 24) + | (mask_m[4] << 22) | (mask_m[5] << 20) + | (mask_m[6] << 18) | (mask_m[7] << 16) + | (mask_m[8] << 14) | (mask_m[9] << 12) + | (mask_m[10] << 10) | (mask_m[11] << 8) + | (mask_m[12] << 6) | (mask_m[13] << 4) + | (mask_m[14] << 2) | (mask_m[15] << 0); + REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask); + + tmp_mask = (mask_p[15] << 28) + | (mask_p[14] << 26) | (mask_p[13] << 24) + | (mask_p[12] << 22) | (mask_p[11] << 20) + | (mask_p[10] << 18) | (mask_p[9] << 16) + | (mask_p[8] << 14) | (mask_p[7] << 12) + | (mask_p[6] << 10) | (mask_p[5] << 8) + | (mask_p[4] << 6) | (mask_p[3] << 4) + | (mask_p[2] << 2) | (mask_p[1] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask); + + tmp_mask = (mask_p[30] << 28) + | (mask_p[29] << 26) | (mask_p[28] << 24) + | (mask_p[27] << 22) | (mask_p[26] << 20) + | (mask_p[25] << 18) | (mask_p[24] << 16) + | (mask_p[23] << 14) | (mask_p[22] << 12) + | (mask_p[21] << 10) | (mask_p[20] << 8) + | (mask_p[19] << 6) | (mask_p[18] << 4) + | (mask_p[17] << 2) | (mask_p[16] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask); + + tmp_mask = (mask_p[45] << 28) + | (mask_p[44] << 26) | (mask_p[43] << 24) + | (mask_p[42] << 22) | (mask_p[41] << 20) + | (mask_p[40] << 18) | (mask_p[39] << 16) + | (mask_p[38] << 14) | (mask_p[37] << 12) + | (mask_p[36] << 10) | (mask_p[35] << 8) + | (mask_p[34] << 6) | (mask_p[33] << 4) + | (mask_p[32] << 2) | (mask_p[31] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask); + + tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28) + | (mask_p[59] << 26) | (mask_p[58] << 24) + | (mask_p[57] << 22) | (mask_p[56] << 20) + | (mask_p[55] << 18) | (mask_p[54] << 16) + | (mask_p[53] << 14) | (mask_p[52] << 12) + | (mask_p[51] << 10) | (mask_p[50] << 8) + | (mask_p[49] << 6) | (mask_p[48] << 4) + | (mask_p[47] << 2) | (mask_p[46] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask); REGWRITE_BUFFER_FLUSH(ah); } --- -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c index db66245..fc08162 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c @@ -169,17 +169,29 @@ static void ar9002_hw_spur_mitigate(struct ath_hw *ah, { int bb_spur = AR_NO_SPUR; int freq; - int bin; + int bin, cur_bin; int bb_spur_off, spur_subchannel_sd; int spur_freq_sd; int spur_delta_phase; int denominator; + int upper, lower, cur_vit_mask; int tmp, newVal; int i; + static const int pilot_mask_reg[4] = { + AR_PHY_TIMING7, AR_PHY_TIMING8, + AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60 + }; + static const int chan_mask_reg[4] = { + AR_PHY_TIMING9, AR_PHY_TIMING10, + AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60 + }; + static const int inc[4] = { 0, 100, 0, 0 }; struct chan_centers centers; int8_t mask_m[123]; int8_t mask_p[123]; + int8_t mask_amt; + int tmp_mask; int cur_bb_spur; bool is2GHz = IS_CHAN_2GHZ(chan);