| Message ID | 6fcaaead-876c-68d1-a049-f1e7f7ff81e7@gmail.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Kalle Valo |
| Headers | show |
| Series | [1/2] wifi: rtl8xxxu: Report the RSSI to the firmware | expand |
> -----Original Message----- > From: Bitterblue Smith <rtl8821cerfe2@gmail.com> > Sent: Saturday, December 31, 2022 12:52 AM > To: linux-wireless@vger.kernel.org > Cc: Jes Sorensen <Jes.Sorensen@gmail.com>; Ping-Ke Shih <pkshih@realtek.com> > Subject: [PATCH 1/2] wifi: rtl8xxxu: Report the RSSI to the firmware > > Or in the case of RTL8188EU, report the RSSI to the rate control code. > > The rate control code for RTL8188EU is less likely to switch to a lower > rate when the RSSI is high. The firmware-based rate control in the other > chips probably works the same way. > > This affects all the chips, but it was only tested with RTL8188EU, > RTL8188FU, and RTL8192EU. > > Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> > --- > .../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 23 +++++++++++++ > .../realtek/rtl8xxxu/rtl8xxxu_8188e.c | 6 ++++ > .../realtek/rtl8xxxu/rtl8xxxu_8188f.c | 1 + > .../realtek/rtl8xxxu/rtl8xxxu_8192c.c | 1 + > .../realtek/rtl8xxxu/rtl8xxxu_8192e.c | 1 + > .../realtek/rtl8xxxu/rtl8xxxu_8723a.c | 1 + > .../realtek/rtl8xxxu/rtl8xxxu_8723b.c | 1 + > .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 34 +++++++++++++++++++ > 8 files changed, 68 insertions(+) > [...] > diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c > b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c > index fd97c040948a..f5fd3c448587 100644 > --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c > +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c > @@ -4461,6 +4461,37 @@ void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv, > rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.media_status_rpt)); > } > > +void rtl8xxxu_gen1_report_rssi(struct rtl8xxxu_priv *priv, u8 macid, u8 rssi) > +{ > + struct h2c_cmd h2c; > + const int h2c_size = 3; Shouldn't it be 4? struct { u8 cmd; u8 macid; u8 unknown0; u8 rssi; // you fill this field. > + > + memset(&h2c, 0, sizeof(struct h2c_cmd)); > + > + h2c.rssi_report.cmd = H2C_SET_RSSI; > + h2c.rssi_report.macid = macid; > + h2c.rssi_report.rssi = rssi; > + > + rtl8xxxu_gen1_h2c_cmd(priv, &h2c, h2c_size); > +} > + [...]
On 03/01/2023 10:05, Ping-Ke Shih wrote: > > >> -----Original Message----- >> From: Bitterblue Smith <rtl8821cerfe2@gmail.com> >> Sent: Saturday, December 31, 2022 12:52 AM >> To: linux-wireless@vger.kernel.org >> Cc: Jes Sorensen <Jes.Sorensen@gmail.com>; Ping-Ke Shih <pkshih@realtek.com> >> Subject: [PATCH 1/2] wifi: rtl8xxxu: Report the RSSI to the firmware >> >> Or in the case of RTL8188EU, report the RSSI to the rate control code. >> >> The rate control code for RTL8188EU is less likely to switch to a lower >> rate when the RSSI is high. The firmware-based rate control in the other >> chips probably works the same way. >> >> This affects all the chips, but it was only tested with RTL8188EU, >> RTL8188FU, and RTL8192EU. >> >> Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> >> --- >> .../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 23 +++++++++++++ >> .../realtek/rtl8xxxu/rtl8xxxu_8188e.c | 6 ++++ >> .../realtek/rtl8xxxu/rtl8xxxu_8188f.c | 1 + >> .../realtek/rtl8xxxu/rtl8xxxu_8192c.c | 1 + >> .../realtek/rtl8xxxu/rtl8xxxu_8192e.c | 1 + >> .../realtek/rtl8xxxu/rtl8xxxu_8723a.c | 1 + >> .../realtek/rtl8xxxu/rtl8xxxu_8723b.c | 1 + >> .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 34 +++++++++++++++++++ >> 8 files changed, 68 insertions(+) >> > > [...] > >> diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c >> b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c >> index fd97c040948a..f5fd3c448587 100644 >> --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c >> +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c >> @@ -4461,6 +4461,37 @@ void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv, >> rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.media_status_rpt)); >> } >> >> +void rtl8xxxu_gen1_report_rssi(struct rtl8xxxu_priv *priv, u8 macid, u8 rssi) >> +{ >> + struct h2c_cmd h2c; >> + const int h2c_size = 3; > > Shouldn't it be 4? > > struct { > u8 cmd; > u8 macid; > u8 unknown0; > u8 rssi; // you fill this field. > I probably copied that from the vendor driver, which doesn't count the cmd field. But it turns out it doesn't matter. 3 and 4 will have the same effect here. rtl8xxxu_gen1_h2c_cmd() only checks if the size is greater than 4 or not. But I suppose 4 is less confusing, so I'll change it. >> + >> + memset(&h2c, 0, sizeof(struct h2c_cmd)); >> + >> + h2c.rssi_report.cmd = H2C_SET_RSSI; >> + h2c.rssi_report.macid = macid; >> + h2c.rssi_report.rssi = rssi; >> + >> + rtl8xxxu_gen1_h2c_cmd(priv, &h2c, h2c_size); >> +} >> + > > [...] > >
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h index be9479f969b7..90268479d3ad 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h @@ -1168,6 +1168,26 @@ struct h2c_cmd { u8 cmd; u8 data; } __packed bt_grant; + struct { + u8 cmd; + u8 macid; + u8 unknown0; + u8 rssi; + /* + * [0] - is_rx + * [1] - stbc_en + * [2] - noisy_decision + * [6] - bf_en + */ + u8 data; + /* + * [0:6] - ra_th_offset + * [7] - ra_offset_direction + */ + u8 ra_th_offset; + u8 unknown1; + u8 unknown2; + } __packed rssi_report; }; }; @@ -1585,6 +1605,7 @@ struct rtl8xxxu_fileops { u32 ramask, u8 rateid, int sgi, int txbw_40mhz); void (*report_connect) (struct rtl8xxxu_priv *priv, u8 macid, bool connect); + void (*report_rssi) (struct rtl8xxxu_priv *priv, u8 macid, u8 rssi); void (*fill_txdesc) (struct ieee80211_hw *hw, struct ieee80211_hdr *hdr, struct ieee80211_tx_info *tx_info, struct rtl8xxxu_txdesc32 *tx_desc, bool sgi, @@ -1686,6 +1707,8 @@ void rtl8xxxu_gen1_report_connect(struct rtl8xxxu_priv *priv, u8 macid, bool connect); void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv, u8 macid, bool connect); +void rtl8xxxu_gen1_report_rssi(struct rtl8xxxu_priv *priv, u8 macid, u8 rssi); +void rtl8xxxu_gen2_report_rssi(struct rtl8xxxu_priv *priv, u8 macid, u8 rssi); void rtl8xxxu_gen1_init_aggregation(struct rtl8xxxu_priv *priv); void rtl8xxxu_gen1_enable_rf(struct rtl8xxxu_priv *priv); void rtl8xxxu_gen1_disable_rf(struct rtl8xxxu_priv *priv); diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c index 37658a090aee..08f3b93ad8d0 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c @@ -1784,6 +1784,11 @@ rtl8188e_update_rate_mask(struct rtl8xxxu_priv *priv, rtl8188e_arfb_refresh(ra); } +static void rtl8188e_ra_set_rssi(struct rtl8xxxu_priv *priv, u8 macid, u8 rssi) +{ + priv->ra_info.rssi_sta_ra = rssi; +} + void rtl8188e_ra_info_init_all(struct rtl8xxxu_ra_info *ra) { ra->decision_rate = DESC_RATE_MCS7; @@ -1842,6 +1847,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops = { .set_tx_power = rtl8188f_set_tx_power, .update_rate_mask = rtl8188e_update_rate_mask, .report_connect = rtl8xxxu_gen2_report_connect, + .report_rssi = rtl8188e_ra_set_rssi, .fill_txdesc = rtl8xxxu_fill_txdesc_v3, .set_crystal_cap = rtl8188f_set_crystal_cap, .cck_rssi = rtl8188e_cck_rssi, diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c index f5a0c7a8a581..af6e2c8a5025 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c @@ -1732,6 +1732,7 @@ struct rtl8xxxu_fileops rtl8188fu_fops = { .set_tx_power = rtl8188f_set_tx_power, .update_rate_mask = rtl8xxxu_gen2_update_rate_mask, .report_connect = rtl8xxxu_gen2_report_connect, + .report_rssi = rtl8xxxu_gen2_report_rssi, .fill_txdesc = rtl8xxxu_fill_txdesc_v2, .set_crystal_cap = rtl8188f_set_crystal_cap, .cck_rssi = rtl8188f_cck_rssi, diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c index 8981a86c833f..e61d65c3579b 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c @@ -609,6 +609,7 @@ struct rtl8xxxu_fileops rtl8192cu_fops = { .set_tx_power = rtl8xxxu_gen1_set_tx_power, .update_rate_mask = rtl8xxxu_update_rate_mask, .report_connect = rtl8xxxu_gen1_report_connect, + .report_rssi = rtl8xxxu_gen1_report_rssi, .fill_txdesc = rtl8xxxu_fill_txdesc_v1, .cck_rssi = rtl8723a_cck_rssi, .writeN_block_size = 128, diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c index ca1688600947..4a1c9bcafe31 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c @@ -1784,6 +1784,7 @@ struct rtl8xxxu_fileops rtl8192eu_fops = { .set_tx_power = rtl8192e_set_tx_power, .update_rate_mask = rtl8xxxu_gen2_update_rate_mask, .report_connect = rtl8xxxu_gen2_report_connect, + .report_rssi = rtl8xxxu_gen2_report_rssi, .fill_txdesc = rtl8xxxu_fill_txdesc_v2, .set_crystal_cap = rtl8723a_set_crystal_cap, .cck_rssi = rtl8192e_cck_rssi, diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c index e881ee33c6e8..5ed523db2d87 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c @@ -478,6 +478,7 @@ struct rtl8xxxu_fileops rtl8723au_fops = { .set_tx_power = rtl8xxxu_gen1_set_tx_power, .update_rate_mask = rtl8xxxu_update_rate_mask, .report_connect = rtl8xxxu_gen1_report_connect, + .report_rssi = rtl8xxxu_gen1_report_rssi, .fill_txdesc = rtl8xxxu_fill_txdesc_v1, .set_crystal_cap = rtl8723a_set_crystal_cap, .cck_rssi = rtl8723a_cck_rssi, diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c index 0ed667d5ed25..21613d60dc22 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c @@ -1727,6 +1727,7 @@ struct rtl8xxxu_fileops rtl8723bu_fops = { .set_tx_power = rtl8723b_set_tx_power, .update_rate_mask = rtl8xxxu_gen2_update_rate_mask, .report_connect = rtl8xxxu_gen2_report_connect, + .report_rssi = rtl8xxxu_gen2_report_rssi, .fill_txdesc = rtl8xxxu_fill_txdesc_v2, .set_crystal_cap = rtl8723a_set_crystal_cap, .cck_rssi = rtl8723b_cck_rssi, diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index fd97c040948a..f5fd3c448587 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -4461,6 +4461,37 @@ void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv, rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.media_status_rpt)); } +void rtl8xxxu_gen1_report_rssi(struct rtl8xxxu_priv *priv, u8 macid, u8 rssi) +{ + struct h2c_cmd h2c; + const int h2c_size = 3; + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + + h2c.rssi_report.cmd = H2C_SET_RSSI; + h2c.rssi_report.macid = macid; + h2c.rssi_report.rssi = rssi; + + rtl8xxxu_gen1_h2c_cmd(priv, &h2c, h2c_size); +} + +void rtl8xxxu_gen2_report_rssi(struct rtl8xxxu_priv *priv, u8 macid, u8 rssi) +{ + struct h2c_cmd h2c; + int h2c_size = sizeof(h2c.rssi_report); + + if (priv->rtl_chip == RTL8723B) + h2c_size = 4; + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + + h2c.rssi_report.cmd = H2C_8723B_RSSI_SETTING; + h2c.rssi_report.macid = macid; + h2c.rssi_report.rssi = rssi; + + rtl8xxxu_gen2_h2c_cmd(priv, &h2c, h2c_size); +} + void rtl8xxxu_gen1_init_aggregation(struct rtl8xxxu_priv *priv) { u8 agg_ctrl, usb_spec, page_thresh, timeout; @@ -6701,6 +6732,9 @@ static void rtl8xxxu_watchdog_callback(struct work_struct *work) signal = ieee80211_ave_rssi(vif); + priv->fops->report_rssi(priv, 0, + rtl8xxxu_signal_to_snr(signal)); + if (priv->fops->set_crystal_cap) rtl8xxxu_track_cfo(priv);
Or in the case of RTL8188EU, report the RSSI to the rate control code. The rate control code for RTL8188EU is less likely to switch to a lower rate when the RSSI is high. The firmware-based rate control in the other chips probably works the same way. This affects all the chips, but it was only tested with RTL8188EU, RTL8188FU, and RTL8192EU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> --- .../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 23 +++++++++++++ .../realtek/rtl8xxxu/rtl8xxxu_8188e.c | 6 ++++ .../realtek/rtl8xxxu/rtl8xxxu_8188f.c | 1 + .../realtek/rtl8xxxu/rtl8xxxu_8192c.c | 1 + .../realtek/rtl8xxxu/rtl8xxxu_8192e.c | 1 + .../realtek/rtl8xxxu/rtl8xxxu_8723a.c | 1 + .../realtek/rtl8xxxu/rtl8xxxu_8723b.c | 1 + .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 34 +++++++++++++++++++ 8 files changed, 68 insertions(+)