diff mbox

IWL3945 problems in 2.6.35-rc1

Message ID AANLkTinmjlukRABwWWVuO6VRHrULcqB7Zk_HQZSDicKr@mail.gmail.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Sedat Dilek June 1, 2010, 3:21 p.m. UTC
None
diff mbox

Patch

diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 71aebbb..6e53154 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -1783,6 +1783,74 @@  static void iwl3945_irq_tasklet(struct iwl_priv *priv)
 #endif
 }
 
+static int iwl3945_get_single_channel_for_scan(struct iwl_priv *priv,
+					   struct ieee80211_vif *vif,
+					   enum ieee80211_band band,
+					   struct iwl3945_scan_channel *scan_ch)
+{
+	const struct ieee80211_supported_band *sband;
+	const struct iwl_channel_info *ch_info;
+	u16 passive_dwell = 0;
+	u16 active_dwell = 0;
+	int i, added = 0;
+	u16 channel = 0;
+
+	sband = iwl_get_hw_mode(priv, band);
+	if (!sband) {
+		IWL_ERR(priv, "invalid band\n");
+		return added;
+	}
+
+	active_dwell = iwl_get_active_dwell_time(priv, band, 0);
+	passive_dwell = iwl_get_passive_dwell_time(priv, band, vif);
+
+	if (passive_dwell <= active_dwell)
+		passive_dwell = active_dwell + 1;
+
+	/* only scan single channel, good enough to reset the RF */
+	/* pick the first valid not in-use channel */
+	if (band == IEEE80211_BAND_5GHZ) {
+		for (i = 14; i < priv->channel_count; i++) {
+			if (priv->channel_info[i].channel !=
+			    le16_to_cpu(priv->staging_rxon.channel)) {
+				channel = priv->channel_info[i].channel;
+				ch_info = iwl_get_channel_info(priv,
+					band, channel);
+				if (is_channel_valid(ch_info))
+					break;
+			}
+		}
+	} else {
+		for (i = 0; i < 14; i++) {
+			if (priv->channel_info[i].channel !=
+			    le16_to_cpu(priv->staging_rxon.channel)) {
+					channel =
+						priv->channel_info[i].channel;
+					ch_info = iwl_get_channel_info(priv,
+						band, channel);
+					if (is_channel_valid(ch_info))
+						break;
+			}
+		}
+	}
+
+	if (channel) {
+		scan_ch->channel = cpu_to_le16(channel);
+		scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
+		scan_ch->active_dwell = cpu_to_le16(active_dwell);
+		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+		/* Set txpower levels to defaults */
+		scan_ch->tpc.dsp_atten = 110;
+		if (band == IEEE80211_BAND_5GHZ)
+			scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
+		else
+			scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
+		added++;
+	} else
+		IWL_ERR(priv, "no valid channel found\n");
+	return added;
+}
+
 static int iwl3945_get_channels_for_scan(struct iwl_priv *priv,
 					 enum ieee80211_band band,
 				     u8 is_active, u8 n_probes,
@@ -2933,10 +3001,23 @@  void iwl3945_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
 	/* select Rx antennas */
 	scan->flags |= iwl3945_get_antenna_flags(priv);
 
-	scan->channel_count =
+	if (priv->is_internal_short_scan) {
+		scan->channel_count =
+			iwl3945_get_single_channel_for_scan(priv, vif, band,
+				(void *)&scan->data[le16_to_cpu(
+				scan->tx_cmd.len)]);
+	} else {
+		scan->channel_count =
+			iwl3945_get_channels_for_scan(priv, band,
+				is_active, n_probes,
+				(void *)&scan->data[le16_to_cpu(
+				scan->tx_cmd.len)], vif);
+	}
+
+	/*scan->channel_count =
 		iwl3945_get_channels_for_scan(priv, band, is_active, n_probes,
 			(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)], vif);
-
+*/
 	if (scan->channel_count == 0) {
 		IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
 		goto done;