diff mbox series

[02/10] wifi: cfg80211: add support for advertising multiple radios belonging to a wiphy

Message ID defa3f593a3b9bd42099cb945d3fede22f22f072.1718881762.git-series.nbd@nbd.name (mailing list archive)
State Changes Requested
Delegated to: Johannes Berg
Headers show
Series cfg80211/mac80211: support defining multiple radios per wiphy | expand

Commit Message

Felix Fietkau June 20, 2024, 11:11 a.m. UTC
The prerequisite for MLO support in cfg80211/mac80211 is that all the links
participating in MLO must be from the same wiphy/ieee80211_hw. To meet this
expectation, some drivers may need to group multiple discrete hardware each
acting as a link in MLO under single wiphy.

With this change, supported frequencies and interface combinations of each
individual radio are reported to user space. This allows user space to figure
out the limitations of what combination of channels can be used concurrently.

Even for non-MLO devices, this improves support for devices capable of
running on multiple channels at the same time.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 include/net/cfg80211.h       |  38 ++++++++++++++-
 include/uapi/linux/nl80211.h |  61 ++++++++++++++++++++++-
 net/wireless/nl80211.c       | 100 +++++++++++++++++++++++++++++++++---
 3 files changed, 193 insertions(+), 6 deletions(-)

Comments

Johannes Berg June 28, 2024, 8:12 a.m. UTC | #1
On Thu, 2024-06-20 at 13:11 +0200, Felix Fietkau wrote:
> 
> + * @NL80211_WIPHY_RADIO_ATTR_FREQ_RANGES: Nested array of frequency ranges
> + *	supported by this radio.

That could point to &enum nl80211_wiphy_radio_freq_range (if it stays
this way)

However, also for new arrays defined in this patchset, which if I'm not
mistaken are

 - NL80211_ATTR_WIPHY_RADIOS
 - NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS
 - NL80211_WIPHY_RADIO_ATTR_FREQ_RANGES
 - NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATIONS

we should probably go with the times and use the multi-attr array
concept:
https://www.kernel.org/doc/html/latest/userspace-api/netlink/specs.html#multi-attr-arrays


That would change the structure so that each of the attributes listed
above can simply appear multiple times. I would consider at that point
renaming them all to singular (since each individually represents a
single entry), and perhaps at that point using a simple structure for
NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE instead of the nesting. You could
even just move struct wiphy_radio_freq_range to nl80211.h

> +static int nl80211_put_radio(struct wiphy *wiphy, struct sk_buff *msg, int idx)
> +{
> +	const struct wiphy_radio *r = &wiphy->radio[idx];
> +	struct nlattr *radio, *freqs, *freq;
> +	int i;
> +
> +	radio = nla_nest_start(msg, idx);
> +	if (!radio)
> +		return -ENOBUFS;
> +
> +	freqs = nla_nest_start_noflag(msg, NL80211_WIPHY_RADIO_ATTR_FREQ_RANGES);

Either way, however, new code should not use _noflag()

johannes
diff mbox series

Patch

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 5da9bb0ac6a4..8a9ef59413d8 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -5403,6 +5403,38 @@  struct wiphy_iftype_akm_suites {
 	int n_akm_suites;
 };
 
+/**
+ * struct wiphy_radio_freq_range - wiphy frequency range
+ * @start_freq:  start range edge frequency (kHz)
+ * @end_freq:    end range edge frequency (kHz)
+ */
+struct wiphy_radio_freq_range {
+	u32 start_freq;
+	u32 end_freq;
+};
+
+
+/**
+ * struct wiphy_radio - physical radio of a wiphy
+ * This structure describes a physical radio belonging to a wiphy.
+ * It is used to describe concurrent-channel capabilities. Only one channel
+ * can be active on the radio described by struct wiphy_radio.
+ *
+ * @freq_range: frequency range that the radio can operate on.
+ * @n_freq_range: number of elements in @freq_range
+ *
+ * @iface_combinations: Valid interface combinations array, should not
+ *	list single interface types.
+ * @n_iface_combinations: number of entries in @iface_combinations array.
+ */
+struct wiphy_radio {
+	const struct wiphy_radio_freq_range *freq_range;
+	int n_freq_range;
+
+	const struct ieee80211_iface_combination *iface_combinations;
+	int n_iface_combinations;
+};
+
 #define CFG80211_HW_TIMESTAMP_ALL_PEERS	0xffff
 
 /**
@@ -5621,6 +5653,9 @@  struct wiphy_iftype_akm_suites {
  *	A value of %CFG80211_HW_TIMESTAMP_ALL_PEERS indicates the driver
  *	supports enabling HW timestamping for all peers (i.e. no need to
  *	specify a mac address).
+ *
+ * @radio: radios belonging to this wiphy
+ * @n_radio: number of radios
  */
 struct wiphy {
 	struct mutex mtx;
@@ -5771,6 +5806,9 @@  struct wiphy {
 
 	u16 hw_timestamp_max_peers;
 
+	const struct wiphy_radio *radio;
+	int n_radio;
+
 	char priv[] __aligned(NETDEV_ALIGN);
 };
 
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index f917bc6c9b6f..8e8b135b0fc0 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2052,6 +2052,10 @@  enum nl80211_commands {
  * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
  *	interface combinations. In each nested item, it contains attributes
  *	defined in &enum nl80211_if_combination_attrs.
+ *	If the wiphy uses multiple radios (@NL80211_ATTR_WIPHY_RADIOS is set),
+ *	this attribute contains the interface combinations of the first radio.
+ *	See @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS for the global wiphy
+ *	combinations for the sum of all radios.
  * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
  *	%NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
  *	are managed in software: interfaces of these types aren't subject to
@@ -2856,6 +2860,14 @@  enum nl80211_commands {
  *	%NL80211_CMD_ASSOCIATE indicating the SPP A-MSDUs
  *	are used on this connection
  *
+ * @NL80211_ATTR_WIPHY_RADIOS: Nested attribute describing physical radios
+ *	belonging to this wiphy. See &enum nl80211_wiphy_radio_attrs.
+ *
+ * @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS: Nested attribute listing the
+ *	supported interface combinations for all radios combined. In each
+ *	nested item, it contains attributes defined in
+ *	&enum nl80211_if_combination_attrs.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3401,6 +3413,9 @@  enum nl80211_attrs {
 
 	NL80211_ATTR_ASSOC_SPP_AMSDU,
 
+	NL80211_ATTR_WIPHY_RADIOS,
+	NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -7999,4 +8014,50 @@  enum nl80211_ap_settings_flags {
 	NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT	= 1 << 1,
 };
 
+/**
+ * enum nl80211_wiphy_radio_attrs - wiphy radio attributes
+ *
+ * @__NL80211_WIPHY_RADIO_ATTR_INVALID: Invalid
+ *
+ * @NL80211_WIPHY_RADIO_ATTR_FREQ_RANGES: Nested array of frequency ranges
+ *	supported by this radio.
+ * @NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing
+ *	the supported interface combinations for this radio. In each nested item,
+ *	it contains attributes defined in &enum nl80211_if_combination_attrs.
+ *
+ * @__NL80211_WIPHY_RADIO_ATTR_LAST: Internal
+ * @NL80211_WIPHY_RADIO_ATTR_MAX: Highest attribute
+ */
+enum nl80211_wiphy_radio_attrs {
+	__NL80211_WIPHY_RADIO_ATTR_INVALID,
+
+	NL80211_WIPHY_RADIO_ATTR_FREQ_RANGES,
+	NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATIONS,
+
+	/* keep last */
+	__NL80211_WIPHY_RADIO_ATTR_LAST,
+	NL80211_WIPHY_RADIO_ATTR_MAX = __NL80211_WIPHY_RADIO_ATTR_LAST - 1,
+};
+
+/**
+ * enum nl80211_wiphy_radio_freq_range - wiphy radio frequency range
+ *
+ * @__NL80211_WIPHY_RADIO_FREQ_ATTR_INVALID: Invalid
+ *
+ * @NL80211_WIPHY_RADIO_FREQ_ATTR_START: Frequency range start
+ * @NL80211_WIPHY_RADIO_FREQ_ATTR_END: Frequency range end
+ *
+ * @__NL80211_WIPHY_RADIO_FREQ_ATTR_LAST: Internal
+ * @NL80211_WIPHY_RADIO_FREQ_ATTR_MAX: Highest attribute
+ */
+enum nl80211_wiphy_radio_freq_range {
+	__NL80211_WIPHY_RADIO_FREQ_ATTR_INVALID,
+
+	NL80211_WIPHY_RADIO_FREQ_ATTR_START,
+	NL80211_WIPHY_RADIO_FREQ_ATTR_END,
+
+	__NL80211_WIPHY_RADIO_FREQ_ATTR_LAST,
+	NL80211_WIPHY_RADIO_FREQ_ATTR_MAX = __NL80211_WIPHY_RADIO_FREQ_ATTR_LAST - 1,
+};
+
 #endif /* __LINUX_NL80211_H */
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 7b0ba0fff082..4639f3435e67 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1680,19 +1680,26 @@  static int nl80211_put_ifcomb_data(struct sk_buff *msg, bool large, int idx,
 
 static int nl80211_put_iface_combinations(struct wiphy *wiphy,
 					  struct sk_buff *msg,
+					  int attr, int radio,
 					  bool large)
 {
+	const struct ieee80211_iface_combination *c;
 	struct nlattr *nl_combis;
-	int i;
+	int i, n;
 
-	nl_combis = nla_nest_start_noflag(msg,
-					  NL80211_ATTR_INTERFACE_COMBINATIONS);
+	nl_combis = nla_nest_start_noflag(msg, attr);
 	if (!nl_combis)
 		goto nla_put_failure;
 
-	for (i = 0; i < wiphy->n_iface_combinations; i++)
-		if (nl80211_put_ifcomb_data(msg, large, i + 1,
-					    &wiphy->iface_combinations[i]))
+	if (radio >= 0) {
+		c = wiphy->radio[0].iface_combinations;
+		n = wiphy->radio[0].n_iface_combinations;
+	} else {
+		c = wiphy->iface_combinations;
+		n = wiphy->n_iface_combinations;
+	}
+	for (i = 0; i < n; i++)
+		if (nl80211_put_ifcomb_data(msg, large, i + 1, &c[i]))
 			goto nla_put_failure;
 
 	nla_nest_end(msg, nl_combis);
@@ -2399,6 +2406,79 @@  static int nl80211_put_mbssid_support(struct wiphy *wiphy, struct sk_buff *msg)
 	return -ENOBUFS;
 }
 
+static int nl80211_put_radio(struct wiphy *wiphy, struct sk_buff *msg, int idx)
+{
+	const struct wiphy_radio *r = &wiphy->radio[idx];
+	struct nlattr *radio, *freqs, *freq;
+	int i;
+
+	radio = nla_nest_start(msg, idx);
+	if (!radio)
+		return -ENOBUFS;
+
+	freqs = nla_nest_start_noflag(msg, NL80211_WIPHY_RADIO_ATTR_FREQ_RANGES);
+	if (!freqs)
+		goto nla_put_failure;
+
+	for (i = 0; i < r->n_freq_range; i++) {
+		const struct wiphy_radio_freq_range *range = &r->freq_range[i];
+		int ret;
+
+		freq = nla_nest_start(msg, i);
+		ret = nla_put_u32(msg, NL80211_WIPHY_RADIO_FREQ_ATTR_START,
+				  range->start_freq) ||
+		      nla_put_u32(msg, NL80211_WIPHY_RADIO_FREQ_ATTR_END,
+				  range->end_freq);
+		nla_nest_end(msg, freq);
+
+		if (ret)
+			goto nla_put_failure;
+	}
+
+	nla_nest_end(msg, freqs);
+
+	if (nl80211_put_iface_combinations(wiphy, msg,
+					   NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATIONS,
+					   idx, true))
+		goto nla_put_failure;
+
+	nla_nest_end(msg, radio);
+	return 0;
+
+nla_put_failure:
+	return -ENOBUFS;
+}
+
+static int nl80211_put_radios(struct wiphy *wiphy, struct sk_buff *msg)
+{
+	struct nlattr *radios;
+	int i;
+
+	if (!wiphy->n_radio)
+		return 0;
+
+	radios = nla_nest_start(msg, NL80211_ATTR_WIPHY_RADIOS);
+	if (!radios)
+		return -ENOBUFS;
+
+	for (i = 0; i < wiphy->n_radio; i++)
+		if (nl80211_put_radio(wiphy, msg, i))
+			goto fail;
+
+	nla_nest_end(msg, radios);
+
+	if (nl80211_put_iface_combinations(wiphy, msg,
+					   NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS,
+					   -1, true))
+		return -ENOBUFS;
+
+	return 0;
+
+fail:
+	nla_nest_cancel(msg, radios);
+	return -ENOBUFS;
+}
+
 struct nl80211_dump_wiphy_state {
 	s64 filter_wiphy;
 	long start;
@@ -2694,6 +2774,8 @@  static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 			goto nla_put_failure;
 
 		if (nl80211_put_iface_combinations(&rdev->wiphy, msg,
+						   NL80211_ATTR_INTERFACE_COMBINATIONS,
+						   rdev->wiphy.n_radio ? 0 : -1,
 						   state->split))
 			goto nla_put_failure;
 
@@ -3008,6 +3090,12 @@  static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 				rdev->wiphy.hw_timestamp_max_peers))
 			goto nla_put_failure;
 
+		state->split_start++;
+		break;
+	case 17:
+		if (nl80211_put_radios(&rdev->wiphy, msg))
+			goto nla_put_failure;
+
 		/* done */
 		state->split_start = 0;
 		break;