@@ -548,6 +548,25 @@ mt76x0_phy_set_chan_bbp_params(struct mt76x0_dev *dev, u8 channel, u16 rf_bw_ban
}
}
+static void mt76x0_ant_select(struct mt76x0_dev *dev)
+{
+ struct ieee80211_channel *chan = dev->mt76.chandef.chan;
+
+ /* single antenna mode */
+ if (chan->band == NL80211_BAND_2GHZ) {
+ mt76_rmw(dev, MT_COEXCFG3,
+ BIT(5) | BIT(4) | BIT(3) | BIT(2), BIT(1));
+ mt76_rmw(dev, MT_WLAN_FUN_CTRL, BIT(5), BIT(6));
+ } else {
+ mt76_rmw(dev, MT_COEXCFG3, BIT(5) | BIT(2),
+ BIT(4) | BIT(3));
+ mt76_clear(dev, MT_WLAN_FUN_CTRL,
+ BIT(6) | BIT(5));
+ }
+ mt76_clear(dev, MT_CMB_CTRL, BIT(14) | BIT(12));
+ mt76_clear(dev, MT_COEXCFG0, BIT(2));
+}
+
static void
mt76x0_bbp_set_bw(struct mt76x0_dev *dev, enum nl80211_chan_width width)
{
@@ -658,6 +677,7 @@ __mt76x0_phy_set_channel(struct mt76x0_dev *dev,
mt76x0_bbp_set_bw(dev, chandef->width);
mt76x0_bbp_set_ctrlch(dev, chandef->width, ch_group_index);
mt76x0_mac_set_ctrlch(dev, ch_group_index & 1);
+ mt76x0_ant_select(dev);
mt76_rmw(dev, MT_EXT_CCA_CFG,
(MT_EXT_CCA_CFG_CCA0 |
@@ -915,21 +935,10 @@ mt76x0_rf_init(struct mt76x0_dev *dev)
rf_set(dev, MT_RF(0, 4), 0x80);
}
-static void mt76x0_ant_select(struct mt76x0_dev *dev)
-{
- /* Single antenna mode. */
- mt76_rmw(dev, MT_WLAN_FUN_CTRL, BIT(5), BIT(6));
- mt76_clear(dev, MT_CMB_CTRL, BIT(14) | BIT(12));
- mt76_clear(dev, MT_COEXCFG0, BIT(2));
- mt76_rmw(dev, MT_COEXCFG3, BIT(5) | BIT(4) | BIT(3) | BIT(2), BIT(1));
-}
-
void mt76x0_phy_init(struct mt76x0_dev *dev)
{
INIT_DELAYED_WORK(&dev->cal_work, mt76x0_phy_calibrate);
- mt76x0_ant_select(dev);
-
mt76x0_rf_init(dev);
mt76x0_set_rx_chains(dev);
Move mt76x0_ant_select routine in __mt76x0_phy_set_channel in order to configure antenna parameters according to the current wireless channel Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> --- .../net/wireless/mediatek/mt76/mt76x0/phy.c | 31 ++++++++++++------- 1 file changed, 20 insertions(+), 11 deletions(-)