@@ -11,13 +11,20 @@
#include <linux/pci.h>
#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/dmi.h>
#include <linux/pci_ids.h>
+#include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_regs.h>
#include <asm/pci-direct.h>
#include <asm/dma.h>
#include <asm/io_apic.h>
#include <asm/apic.h>
#include <asm/iommu.h>
#include <asm/gart.h>
+#include <asm/io.h>
+
+#define dev_err(msg) pr_err("pci 0000:%02x:%02x.%d: %s", bus, slot, func, msg)
static void __init fix_hypertransport_config(int num, int slot, int func)
{
@@ -199,6 +206,62 @@ static void __init ati_bugs_contd(int nu
}
#endif
+#define BCM4331_MMIO_SIZE 16384
+#define BCM4331_PM_CAP 0x40
+#define bcma_aread32(reg) ioread32(mmio + 1 * BCMA_CORE_SIZE + reg)
+#define bcma_awrite32(reg, val) iowrite32(val, mmio + 1 * BCMA_CORE_SIZE + reg)
+
+static void __init apple_airport_reset(int bus, int slot, int func)
+{
+ void __iomem *mmio;
+ u16 pmcsr;
+ u64 addr;
+ int i;
+
+ if (!dmi_match(DMI_SYS_VENDOR, "Apple Inc."))
+ return;
+
+ /* Card may have been put into PCI_D3hot by grub quirk */
+ pmcsr = read_pci_config_16(bus, slot, func, BCM4331_PM_CAP + PCI_PM_CTRL);
+
+ if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) {
+ pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+ write_pci_config_16(bus, slot, func, BCM4331_PM_CAP + PCI_PM_CTRL, pmcsr);
+ mdelay(10);
+
+ pmcsr = read_pci_config_16(bus, slot, func, BCM4331_PM_CAP + PCI_PM_CTRL);
+ if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) {
+ dev_err("Cannot power up Apple AirPort card\n");
+ return;
+ }
+ }
+
+ addr = read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0);
+ addr |= (u64)read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_1) << 32;
+ addr &= PCI_BASE_ADDRESS_MEM_MASK;
+
+ mmio = early_ioremap(addr, BCM4331_MMIO_SIZE);
+ if (!mmio) {
+ dev_err("Cannot iomap Apple AirPort card\n");
+ return;
+ }
+
+ pr_info("Resetting Apple AirPort card (left enabled by EFI)\n");
+
+ for (i = 0; bcma_aread32(BCMA_RESET_ST) && i < 30; i++)
+ udelay(10);
+
+ bcma_awrite32(BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+ bcma_aread32(BCMA_RESET_CTL);
+ udelay(1);
+
+ bcma_awrite32(BCMA_RESET_CTL, 0);
+ bcma_aread32(BCMA_RESET_CTL);
+ udelay(10);
+
+ early_iounmap(mmio, BCM4331_MMIO_SIZE);
+}
+
#define QFLAG_APPLY_ONCE 0x1
#define QFLAG_APPLIED 0x2
#define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED)
@@ -222,6 +285,8 @@ static struct chipset early_qrk[] __init
PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs },
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd },
+ { PCI_VENDOR_ID_BROADCOM, 0x4331,
+ PCI_CLASS_NETWORK_OTHER, PCI_ANY_ID, 0, apple_airport_reset},
{}
};
@@ -8,8 +8,6 @@
#include <linux/bcma/bcma.h>
#include <linux/delay.h>
-#define BCMA_CORE_SIZE 0x1000
-
struct bcma_bus;
/* main.c */
@@ -124,6 +124,7 @@ struct bcma_host_ops {
#define BCMA_CORE_DEFAULT 0xFFF
#define BCMA_MAX_NR_CORES 16
+#define BCMA_CORE_SIZE 0x1000
struct bcma_device {
struct bcma_bus *bus;
@@ -35,6 +35,7 @@
#define BCMA_IOST_BIST_DONE 0x8000
#define BCMA_RESET_CTL 0x0800
#define BCMA_RESET_CTL_RESET 0x0001
+#define BCMA_RESET_ST 0x0804
/* BCMA PCI config space registers. */
#define BCMA_PCI_PMCSR 0x44