@@ -479,6 +479,39 @@ static const s32 atusb_ed_levels[ATUSB_MAX_ED_LEVELS + 1] = {
};
static int
+atusb_set_cca_mode(struct ieee802154_hw *hw, const struct wpan_phy_cca *cca)
+{
+ struct atusb *atusb = hw->priv;
+ u8 val;
+
+ /* mapping 802.15.4 to driver spec */
+ switch (cca->mode) {
+ case NL802154_CCA_ENERGY:
+ val = 1;
+ break;
+ case NL802154_CCA_CARRIER:
+ val = 2;
+ break;
+ case NL802154_CCA_ENERGY_CARRIER:
+ switch (cca->opt) {
+ case NL802154_CCA_OPT_ENERGY_CARRIER_AND:
+ val = 3;
+ break;
+ case NL802154_CCA_OPT_ENERGY_CARRIER_OR:
+ val = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return atusb_write_subreg(atusb, SR_CCA_MODE, val);
+}
+
+static int
atusb_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm)
{
struct atusb *atusb = hw->priv;
@@ -545,6 +578,7 @@ static struct ieee802154_ops atusb_ops = {
.stop = atusb_stop,
.set_hw_addr_filt = atusb_set_hw_addr_filt,
.set_txpower = atusb_set_txpower,
+ .set_cca_mode = atusb_set_cca_mode,
.set_cca_ed_level = atusb_set_cca_ed_level,
.set_csma_params = atusb_set_csma_params,
.set_promiscuous_mode = atusb_set_promiscuous_mode,
@@ -677,11 +711,19 @@ static int atusb_probe(struct usb_interface *interface,
hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT |
IEEE802154_HW_PROMISCUOUS | IEEE802154_HW_CSMA_PARAMS;
- hw->phy->flags = WPAN_PHY_FLAG_TXPOWER | WPAN_PHY_FLAG_CCA_ED_LEVEL;
+ hw->phy->flags = WPAN_PHY_FLAG_TXPOWER | WPAN_PHY_FLAG_CCA_ED_LEVEL |
+ WPAN_PHY_FLAG_CCA_MODE;
+
+ hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) |
+ BIT(NL802154_CCA_CARRIER) | BIT(NL802154_CCA_ENERGY_CARRIER);
+ hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND) |
+ BIT(NL802154_CCA_OPT_ENERGY_CARRIER_OR);
hw->phy->supported.cca_ed_levels = atusb_ed_levels;
hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(atusb_ed_levels);
+ hw->phy->cca.mode = NL802154_CCA_ENERGY;
+
hw->phy->current_page = 0;
hw->phy->current_channel = 11; /* reset default */
hw->phy->supported.channels[0] = 0x7FFF800;
Catching up with the stack here and implement CCA mode setting. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> --- drivers/net/ieee802154/atusb.c | 44 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 43 insertions(+), 1 deletion(-)