@@ -13,8 +13,8 @@
* Firmware: ben-wpan/atusb/fw/include/atusb/atusb.h
*/
-#ifndef _ATUSB_H
-#define _ATUSB_H
+#ifndef _ATUSB_H
+#define _ATUSB_H
#define ATUSB_VENDOR_ID 0x20b7 /* Qi Hardware*/
#define ATUSB_PRODUCT_ID 0x1540 /* 802.15.4, device 0 */
@@ -46,9 +46,12 @@ enum atusb_requests {
ATUSB_SPI_WRITE2_SYNC,
ATUSB_RX_MODE = 0x40, /* HardMAC group */
ATUSB_TX,
+ ATUSB_EUI64_WRITE = 0x50, /* Parameter in EEPROM grp */
+ ATUSB_EUI64_READ,
};
-/* Direction bRequest wValue wIndex wLength
+/*
+ * Direction bRequest wValue wIndex wLength
*
* ->host ATUSB_ID - - 3
* ->host ATUSB_BUILD - - #bytes
@@ -76,6 +79,8 @@ enum atusb_requests {
*
* host-> ATUSB_RX_MODE on - 0
* host-> ATUSB_TX flags ack_seq #bytes
+ * host-> ATUSB_EUI64_WRITE - - #bytes (8)
+ * ->host ATUSB_EUI64_READ - - #bytes (8)
*/
#define ATUSB_REQ_FROM_DEV (USB_TYPE_VENDOR | USB_DIR_IN)
This file is shared between the atusb firmware and the kernel driver. In this update it brings the new interfaces from version 0.3 of the firmware. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> --- drivers/net/ieee802154/atusb.h | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)