diff --git a/drivers/net/ieee802154/Kconfig b/drivers/net/ieee802154/Kconfig
index 3057a8d..d3b3a60 100644
--- a/drivers/net/ieee802154/Kconfig
+++ b/drivers/net/ieee802154/Kconfig
@@ -82,3 +82,24 @@ config IEEE802154_ADF7242
 
 	  This driver can also be built as a module. To do so, say M here.
 	  the module will be called 'adf7242'.
+
+config IEEE802154_CA8210
+	tristate "Cascoda CA8210 transceiver driver"
+	depends on IEEE802154_DRIVERS && MAC802154
+	depends on SPI
+	---help---
+	  Say Y here to enable the CA8210 SPI 802.15.4 wireless
+	  controller.
+
+	  This driver can also be built as a module. To do so, say M here.
+	  the module will be called 'ca8210'.
+
+config IEEE802154_CA8210_DEBUGFS
+	bool "CA8210 debugfs interface"
+	depends on IEEE802154_CA8210
+	depends on DEBUG_FS
+	---help---
+	  This option compiles debugfs code for the ca8210 driver. This
+	  exposes a debugfs node for each CA8210 instance which allows
+	  direct use of the Cascoda API, exposing the 802.15.4 MAC
+	  management entities.
diff --git a/drivers/net/ieee802154/Makefile b/drivers/net/ieee802154/Makefile
index 3a923d3..8374bb4 100644
--- a/drivers/net/ieee802154/Makefile
+++ b/drivers/net/ieee802154/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_IEEE802154_MRF24J40) += mrf24j40.o
 obj-$(CONFIG_IEEE802154_CC2520) += cc2520.o
 obj-$(CONFIG_IEEE802154_ATUSB) += atusb.o
 obj-$(CONFIG_IEEE802154_ADF7242) += adf7242.o
+obj-$(CONFIG_IEEE802154_CA8210) += ca8210.o
diff --git a/drivers/net/ieee802154/ca8210.c b/drivers/net/ieee802154/ca8210.c
new file mode 100644
index 0000000..ce18a84
--- /dev/null
+++ b/drivers/net/ieee802154/ca8210.c
@@ -0,0 +1,3273 @@
+/*
+ * http://www.cascoda.com/products/ca-821x/
+ * Copyright (c) 2016, Cascoda, Ltd.
+ * All rights reserved.
+ *
+ * This code is dual-licensed under both GPLv2 and 3-clause BSD. What follows is
+ * the license notice for both respectively.
+ *
+ *******************************************************************************
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *******************************************************************************
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. Neither the name of the copyright holder nor the names of its contributors
+ * may be used to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/cdev.h>
+#include <linux/clk-provider.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/ieee802154.h>
+#include <linux/kfifo.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/poll.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/workqueue.h>
+
+#include <net/ieee802154_netdev.h>
+#include <net/mac802154.h>
+
+#define DRIVER_NAME "ca8210"
+
+/* external clock frequencies */
+#define ONE_MHZ      1000000
+#define TWO_MHZ      (2 * ONE_MHZ)
+#define FOUR_MHZ     (4 * ONE_MHZ)
+#define EIGHT_MHZ    (8 * ONE_MHZ)
+#define SIXTEEN_MHZ  (16 * ONE_MHZ)
+
+/* spi constants */
+#define CA8210_SPI_BUF_SIZE 256
+#define CA8210_SYNC_TIMEOUT 1000     /* Timeout for synchronous commands [ms] */
+
+/* api constants */
+#define CA8210_DATA_CNF_TIMEOUT 300   /* Timeout for data confirms [ms] */
+
+/* test interface constants */
+#define CA8210_TEST_INT_FILE_NAME "ca8210_test"
+#define CA8210_TEST_INT_FIFO_SIZE 256
+
+/* MAC status enumerations */
+#define MAC_SUCCESS                     (0x00)
+#define MAC_ERROR                       (0x01)
+#define MAC_CANCELLED                   (0x02)
+#define MAC_READY_FOR_POLL              (0x03)
+#define MAC_COUNTER_ERROR               (0xDB)
+#define MAC_IMPROPER_KEY_TYPE           (0xDC)
+#define MAC_IMPROPER_SECURITY_LEVEL     (0xDD)
+#define MAC_UNSUPPORTED_LEGACY          (0xDE)
+#define MAC_UNSUPPORTED_SECURITY        (0xDF)
+#define MAC_BEACON_LOST                 (0xE0)
+#define MAC_CHANNEL_ACCESS_FAILURE      (0xE1)
+#define MAC_DENIED                      (0xE2)
+#define MAC_DISABLE_TRX_FAILURE         (0xE3)
+#define MAC_SECURITY_ERROR              (0xE4)
+#define MAC_FRAME_TOO_LONG              (0xE5)
+#define MAC_INVALID_GTS                 (0xE6)
+#define MAC_INVALID_HANDLE              (0xE7)
+#define MAC_INVALID_PARAMETER           (0xE8)
+#define MAC_NO_ACK                      (0xE9)
+#define MAC_NO_BEACON                   (0xEA)
+#define MAC_NO_DATA                     (0xEB)
+#define MAC_NO_SHORT_ADDRESS            (0xEC)
+#define MAC_OUT_OF_CAP                  (0xED)
+#define MAC_PAN_ID_CONFLICT             (0xEE)
+#define MAC_REALIGNMENT                 (0xEF)
+#define MAC_TRANSACTION_EXPIRED         (0xF0)
+#define MAC_TRANSACTION_OVERFLOW        (0xF1)
+#define MAC_TX_ACTIVE                   (0xF2)
+#define MAC_UNAVAILABLE_KEY             (0xF3)
+#define MAC_UNSUPPORTED_ATTRIBUTE       (0xF4)
+#define MAC_INVALID_ADDRESS             (0xF5)
+#define MAC_ON_TIME_TOO_LONG            (0xF6)
+#define MAC_PAST_TIME                   (0xF7)
+#define MAC_TRACKING_OFF                (0xF8)
+#define MAC_INVALID_INDEX               (0xF9)
+#define MAC_LIMIT_REACHED               (0xFA)
+#define MAC_READ_ONLY                   (0xFB)
+#define MAC_SCAN_IN_PROGRESS            (0xFC)
+#define MAC_SUPERFRAME_OVERLAP          (0xFD)
+#define MAC_SYSTEM_ERROR                (0xFF)
+
+/* HWME attribute IDs */
+#define HWME_EDTHRESHOLD       (0x04)
+#define HWME_EDVALUE           (0x06)
+#define HWME_SYSCLKOUT         (0x0F)
+
+/* TDME attribute IDs */
+#define TDME_CHANNEL          (0x00)
+#define TDME_ATM_CONFIG       (0x06)
+
+#define MAX_HWME_ATTRIBUTE_SIZE  16
+#define MAX_TDME_ATTRIBUTE_SIZE  2
+
+/* PHY/MAC PIB Attribute Enumerations */
+#define PHY_CURRENT_CHANNEL               (0x00)
+#define PHY_TRANSMIT_POWER                (0x02)
+#define PHY_CCA_MODE                      (0x03)
+#define MAC_ASSOCIATION_PERMIT            (0x41)
+#define MAC_AUTO_REQUEST                  (0x42)
+#define MAC_BATT_LIFE_EXT                 (0x43)
+#define MAC_BATT_LIFE_EXT_PERIODS         (0x44)
+#define MAC_BEACON_PAYLOAD                (0x45)
+#define MAC_BEACON_PAYLOAD_LENGTH         (0x46)
+#define MAC_BEACON_ORDER                  (0x47)
+#define MAC_GTS_PERMIT                    (0x4d)
+#define MAC_MAX_CSMA_BACKOFFS             (0x4e)
+#define MAC_MIN_BE                        (0x4f)
+#define MAC_PAN_ID                        (0x50)
+#define MAC_PROMISCUOUS_MODE              (0x51)
+#define MAC_RX_ON_WHEN_IDLE               (0x52)
+#define MAC_SHORT_ADDRESS                 (0x53)
+#define MAC_SUPERFRAME_ORDER              (0x54)
+#define MAC_ASSOCIATED_PAN_COORD          (0x56)
+#define MAC_MAX_BE                        (0x57)
+#define MAC_MAX_FRAME_RETRIES             (0x59)
+#define MAC_RESPONSE_WAIT_TIME            (0x5A)
+#define MAC_SECURITY_ENABLED              (0x5D)
+
+#define MAC_AUTO_REQUEST_SECURITY_LEVEL   (0x78)
+#define MAC_AUTO_REQUEST_KEY_ID_MODE      (0x79)
+
+#define NS_IEEE_ADDRESS                   (0xFF) /* Non-standard IEEE address */
+
+/* MAC Address Mode Definitions */
+#define MAC_MODE_NO_ADDR                (0x00)
+#define MAC_MODE_SHORT_ADDR             (0x02)
+#define MAC_MODE_LONG_ADDR              (0x03)
+
+/* MAC constants */
+#define MAX_BEACON_OVERHEAD        (75)
+#define MAX_BEACON_PAYLOAD_LENGTH  (IEEE802154_MTU - MAX_BEACON_OVERHEAD)
+
+#define MAX_ATTRIBUTE_SIZE              (122)
+#define MAX_DATA_SIZE                   (114)
+
+#define CA8210_VALID_CHANNELS                 (0x07FFF800)
+
+/* MAC workarounds for V1.1 and MPW silicon (V0.x) */
+#define CA8210_MAC_WORKAROUNDS (0)
+#define CA8210_MAC_MPW         (0)
+
+/* memory manipulation macros */
+#define LS_BYTE(x)     ((u8)((x) & 0xFF))
+#define MS_BYTE(x)     ((u8)(((x) >> 8) & 0xFF))
+
+/* message ID codes in SPI commands */
+/* downstream */
+#define MCPS_DATA_REQUEST                     (0x00)
+#define MLME_ASSOCIATE_REQUEST                (0x02)
+#define MLME_ASSOCIATE_RESPONSE               (0x03)
+#define MLME_DISASSOCIATE_REQUEST             (0x04)
+#define MLME_GET_REQUEST                      (0x05)
+#define MLME_ORPHAN_RESPONSE                  (0x06)
+#define MLME_RESET_REQUEST                    (0x07)
+#define MLME_RX_ENABLE_REQUEST                (0x08)
+#define MLME_SCAN_REQUEST                     (0x09)
+#define MLME_SET_REQUEST                      (0x0A)
+#define MLME_START_REQUEST                    (0x0B)
+#define MLME_POLL_REQUEST                     (0x0D)
+#define HWME_SET_REQUEST                      (0x0E)
+#define HWME_GET_REQUEST                      (0x0F)
+#define TDME_SETSFR_REQUEST                   (0x11)
+#define TDME_GETSFR_REQUEST                   (0x12)
+#define TDME_SET_REQUEST                      (0x14)
+/* upstream */
+#define MCPS_DATA_INDICATION                  (0x00)
+#define MCPS_DATA_CONFIRM                     (0x01)
+#define MLME_RESET_CONFIRM                    (0x0A)
+#define MLME_SET_CONFIRM                      (0x0E)
+#define MLME_START_CONFIRM                    (0x0F)
+#define HWME_SET_CONFIRM                      (0x12)
+#define HWME_GET_CONFIRM                      (0x13)
+#define HWME_WAKEUP_INDICATION		      (0x15)
+#define TDME_SETSFR_CONFIRM                   (0x17)
+
+/* SPI command IDs */
+/* bit indicating a confirm or indication from slave to master */
+#define SPI_S2M                            (0x20)
+/* bit indicating a synchronous message */
+#define SPI_SYN                            (0x40)
+
+/* SPI command definitions */
+#define SPI_IDLE                           (0xFF)
+#define SPI_NACK                           (0xF0)
+
+#define SPI_MCPS_DATA_REQUEST          (MCPS_DATA_REQUEST)
+#define SPI_MCPS_DATA_INDICATION       (MCPS_DATA_INDICATION + SPI_S2M)
+#define SPI_MCPS_DATA_CONFIRM          (MCPS_DATA_CONFIRM + SPI_S2M)
+
+#define SPI_MLME_ASSOCIATE_REQUEST     (MLME_ASSOCIATE_REQUEST)
+#define SPI_MLME_RESET_REQUEST         (MLME_RESET_REQUEST + SPI_SYN)
+#define SPI_MLME_SET_REQUEST           (MLME_SET_REQUEST + SPI_SYN)
+#define SPI_MLME_START_REQUEST         (MLME_START_REQUEST + SPI_SYN)
+#define SPI_MLME_RESET_CONFIRM         (MLME_RESET_CONFIRM + SPI_S2M + SPI_SYN)
+#define SPI_MLME_SET_CONFIRM           (MLME_SET_CONFIRM + SPI_S2M + SPI_SYN)
+#define SPI_MLME_START_CONFIRM         (MLME_START_CONFIRM + SPI_S2M + SPI_SYN)
+
+#define SPI_HWME_SET_REQUEST           (HWME_SET_REQUEST + SPI_SYN)
+#define SPI_HWME_GET_REQUEST           (HWME_GET_REQUEST + SPI_SYN)
+#define SPI_HWME_SET_CONFIRM           (HWME_SET_CONFIRM + SPI_S2M + SPI_SYN)
+#define SPI_HWME_GET_CONFIRM           (HWME_GET_CONFIRM + SPI_S2M + SPI_SYN)
+#define SPI_HWME_WAKEUP_INDICATION     (HWME_WAKEUP_INDICATION + SPI_S2M)
+
+#define SPI_TDME_SETSFR_REQUEST        (TDME_SETSFR_REQUEST + SPI_SYN)
+#define SPI_TDME_SET_REQUEST           (TDME_SET_REQUEST + SPI_SYN)
+#define SPI_TDME_SETSFR_CONFIRM        (TDME_SETSFR_CONFIRM + SPI_S2M + SPI_SYN)
+
+/* TDME SFR addresses */
+/* Page 0 */
+#define CA8210_SFR_PACFG                   (0xB1)
+#define CA8210_SFR_MACCON                  (0xD8)
+#define CA8210_SFR_PACFGIB                 (0xFE)
+/* Page 1 */
+#define CA8210_SFR_LOTXCAL                 (0xBF)
+#define CA8210_SFR_PTHRH                   (0xD1)
+#define CA8210_SFR_PRECFG                  (0xD3)
+#define CA8210_SFR_LNAGX40                 (0xE1)
+#define CA8210_SFR_LNAGX41                 (0xE2)
+#define CA8210_SFR_LNAGX42                 (0xE3)
+#define CA8210_SFR_LNAGX43                 (0xE4)
+#define CA8210_SFR_LNAGX44                 (0xE5)
+#define CA8210_SFR_LNAGX45                 (0xE6)
+#define CA8210_SFR_LNAGX46                 (0xE7)
+#define CA8210_SFR_LNAGX47                 (0xE9)
+
+#define PACFGIB_DEFAULT_CURRENT            (0x3F)
+#define PTHRH_DEFAULT_THRESHOLD            (0x5A)
+#define LNAGX40_DEFAULT_GAIN               (0x29) /* 10dB */
+#define LNAGX41_DEFAULT_GAIN               (0x54) /* 21dB */
+#define LNAGX42_DEFAULT_GAIN               (0x6C) /* 27dB */
+#define LNAGX43_DEFAULT_GAIN               (0x7A) /* 30dB */
+#define LNAGX44_DEFAULT_GAIN               (0x84) /* 33dB */
+#define LNAGX45_DEFAULT_GAIN               (0x8B) /* 34dB */
+#define LNAGX46_DEFAULT_GAIN               (0x92) /* 36dB */
+#define LNAGX47_DEFAULT_GAIN               (0x96) /* 37dB */
+
+#define CA8210_IOCTL_HARD_RESET            (0x00)
+
+/* Structs/Enums */
+
+/**
+ * struct cas_control - spi transfer structure
+ * @msg:                  spi_message for each exchange
+ * @transfer:             spi_transfer for each exchange
+ * @tx_buf:               source array for transmission
+ * @tx_in_buf:            array storing bytes received during transmission
+ * @priv:                 pointer to private data
+ *
+ * This structure stores all the necessary data passed around during a single
+ * spi exchange.
+ */
+struct cas_control {
+	struct spi_message msg;
+	struct spi_transfer transfer;
+
+	u8 tx_buf[CA8210_SPI_BUF_SIZE];
+	u8 tx_in_buf[CA8210_SPI_BUF_SIZE];
+
+	struct ca8210_priv *priv;
+};
+
+/**
+ * struct ca8210_test - ca8210 test interface structure
+ * @ca8210_dfs_spi_int: pointer to the entry in the debug fs for this device
+ * @up_fifo:            fifo for upstream messages
+ *
+ * This structure stores all the data pertaining to the debug interface
+ */
+struct ca8210_test {
+	struct dentry *ca8210_dfs_spi_int;
+	struct kfifo up_fifo;
+	wait_queue_head_t readq;
+};
+
+/**
+ * struct ca8210_priv - ca8210 private data structure
+ * @spi:                    pointer to the ca8210 spi device object
+ * @hw:                     pointer to the ca8210 ieee802154_hw object
+ * @hw_registered:          true if hw has been registered with ieee802154
+ * @lock:                   spinlock protecting the private data area
+ * @async_tx_workqueue:     workqueue for asynchronous transmission
+ * @mlme_workqueue:           workqueue for triggering MLME Reset
+ * @irq_workqueue:          workqueue for irq processing
+ * @async_tx_timeout_work:  delayed work object for a single asynchronous
+ *                           transmission timeout
+ * @tx_skb:                 current socket buffer to transmit
+ * @nextmsduhandle:         msdu handle to pass to the 15.4 MAC layer for the
+ *                           next transmission
+ * @clk:                    external clock provided by the ca8210
+ * @last_dsn:               sequence number of last data packet received, for
+ *                           resend detection
+ * @test:                   test interface data section for this instance
+ * @async_tx_pending:       true if an asynchronous transmission was started and
+ *                           is not complete
+ * @sync_tx_pending:        true if a synchronous (from driver perspective)
+ *                           transmission was started and is not complete
+ * @sync_command_pending:   true if waiting for a synchronous (Cascoda API)
+ *                           response
+ * @sync_command_mutex:     mutex controlling access to sync command objects
+ * @sync_command_response:  pointer to buffer to fill with sync response
+ * @ca8210_is_awake:        nonzero if ca8210 is initialised, ready for comms
+ * @sync_down:              counts number of downstream synchronous commands
+ * @sync_up:                counts number of upstream synchronous commands
+ * @spi_transfer_complete   completion object for a single spi_transfer
+ * @sync_exchange_complete  completion object for a complete synchronous API
+ *                           exchange
+ */
+struct ca8210_priv {
+	struct spi_device *spi;
+	struct ieee802154_hw *hw;
+	bool hw_registered;
+	spinlock_t lock;
+	struct workqueue_struct *async_tx_workqueue, *mlme_workqueue;
+	struct workqueue_struct *irq_workqueue;
+	struct delayed_work async_tx_timeout_work;
+	struct sk_buff *tx_skb;
+	u8 nextmsduhandle;
+	struct clk *clk;
+	int last_dsn;
+	struct ca8210_test test;
+	bool async_tx_pending, sync_tx_pending;
+	bool sync_command_pending;
+	struct mutex sync_command_mutex;
+	u8 *sync_command_response;
+	struct completion ca8210_is_awake;
+	int sync_down, sync_up;
+	struct completion spi_transfer_complete, sync_exchange_complete;
+};
+
+/**
+ * struct work_priv_container - link between a work object and the relevant
+ *                              device's private data
+ * @work: work object being executed
+ * @priv: device's private data section
+ *
+ */
+struct work_priv_container {
+	struct work_struct work;
+	struct ca8210_priv *priv;
+};
+
+/**
+ * struct ca8210_platform_data - ca8210 platform data structure
+ * @extclockenable: true if the external clock is to be enabled
+ * @extclockfreq:   frequency of the external clock
+ * @extclockgpio:   ca8210 output gpio of the external clock
+ * @gpio_reset:     gpio number of ca8210 reset line
+ * @gpio_irq:       gpio number of ca8210 interrupt line
+ * @irq_id:         identifier for the ca8210 irq
+ *
+ */
+struct ca8210_platform_data {
+	bool extclockenable;
+	unsigned int extclockfreq;
+	unsigned int extclockgpio;
+	int gpio_reset;
+	int gpio_irq;
+	int irq_id;
+};
+
+/**
+ * struct fulladdr - full MAC addressing information structure
+ * @mode:    address mode (none, short, extended)
+ * @pan_id:  16-bit LE pan id
+ * @address: LE address, variable length as specified by mode
+ *
+ */
+struct fulladdr {
+	u8         mode;
+	u8         pan_id[2];
+	u8         address[8];
+};
+
+/**
+ * union macaddr: generic MAC address container
+ * @short_addr:   16-bit short address
+ * @ieee_address: 64-bit extended address as LE byte array
+ *
+ */
+union macaddr {
+	u16        short_address;
+	u8         ieee_address[8];
+};
+
+/**
+ * struct secspec: security specification for SAP commands
+ * @security_level: 0-7, controls level of authentication & encryption
+ * @key_id_mode:    0-3, specifies how to obtain key
+ * @key_source:     extended key retrieval data
+ * @key_index:      single-byte key identifier
+ *
+ */
+struct secspec {
+	u8         security_level;
+	u8         key_id_mode;
+	u8         key_source[8];
+	u8         key_index;
+};
+
+/* downlink functions parameter set definitions */
+struct mcps_data_request_pset {
+	u8              src_addr_mode;
+	struct fulladdr dst;
+	u8              msdu_length;
+	u8              msdu_handle;
+	u8              tx_options;
+	u8              msdu[MAX_DATA_SIZE];
+};
+
+struct mlme_set_request_pset {
+	u8         pib_attribute;
+	u8         pib_attribute_index;
+	u8         pib_attribute_length;
+	u8         pib_attribute_value[MAX_ATTRIBUTE_SIZE];
+};
+
+struct hwme_set_request_pset {
+	u8         hw_attribute;
+	u8         hw_attribute_length;
+	u8         hw_attribute_value[MAX_HWME_ATTRIBUTE_SIZE];
+};
+
+struct hwme_get_request_pset {
+	u8         hw_attribute;
+};
+
+struct tdme_setsfr_request_pset {
+	u8         sfr_page;
+	u8         sfr_address;
+	u8         sfr_value;
+};
+
+/* uplink functions parameter set definitions */
+struct hwme_set_confirm_pset {
+	u8         status;
+	u8         hw_attribute;
+};
+
+struct hwme_get_confirm_pset {
+	u8         status;
+	u8         hw_attribute;
+	u8         hw_attribute_length;
+	u8         hw_attribute_value[MAX_HWME_ATTRIBUTE_SIZE];
+};
+
+struct tdme_setsfr_confirm_pset {
+	u8         status;
+	u8         sfr_page;
+	u8         sfr_address;
+};
+
+struct mac_message {
+	u8      command_id;
+	u8      length;
+	union {
+		struct mcps_data_request_pset       data_req;
+		struct mlme_set_request_pset        set_req;
+		struct hwme_set_request_pset        hwme_set_req;
+		struct hwme_get_request_pset        hwme_get_req;
+		struct tdme_setsfr_request_pset     tdme_set_sfr_req;
+		struct hwme_set_confirm_pset        hwme_set_cnf;
+		struct hwme_get_confirm_pset        hwme_get_cnf;
+		struct tdme_setsfr_confirm_pset     tdme_set_sfr_cnf;
+		u8                                  u8param;
+		u8                                  status;
+		u8                                  payload[148];
+	} pdata;
+};
+
+union pa_cfg_sfr {
+	struct {
+		u8 bias_current_trim     : 3;
+		u8 /* reserved */        : 1;
+		u8 buffer_capacitor_trim : 3;
+		u8 boost                 : 1;
+	};
+	u8 paib;
+};
+
+struct preamble_cfg_sfr {
+	u8 timeout_symbols      : 3;
+	u8 acquisition_symbols  : 3;
+	u8 search_symbols       : 2;
+};
+
+static int (*cascoda_api_upstream)(
+	const u8 *buf,
+	size_t len,
+	void *device_ref
+);
+
+/**
+ * link_to_linux_err() - Translates an 802.15.4 return code into the closest
+ *                       linux error
+ * @link_status:  802.15.4 status code
+ *
+ * Return: 0 or Linux error code
+ */
+static int link_to_linux_err(int link_status)
+{
+	if (link_status < 0) {
+		/* status is already a Linux code */
+		return link_status;
+	}
+	switch (link_status) {
+	case MAC_SUCCESS:
+	case MAC_REALIGNMENT:
+		return 0;
+	case MAC_IMPROPER_KEY_TYPE:
+		return -EKEYREJECTED;
+	case MAC_IMPROPER_SECURITY_LEVEL:
+	case MAC_UNSUPPORTED_LEGACY:
+	case MAC_DENIED:
+		return -EACCES;
+	case MAC_BEACON_LOST:
+	case MAC_NO_ACK:
+	case MAC_NO_BEACON:
+		return -ENETUNREACH;
+	case MAC_CHANNEL_ACCESS_FAILURE:
+	case MAC_TX_ACTIVE:
+	case MAC_SCAN_IN_PROGRESS:
+		return -EBUSY;
+	case MAC_DISABLE_TRX_FAILURE:
+	case MAC_OUT_OF_CAP:
+		return -EAGAIN;
+	case MAC_FRAME_TOO_LONG:
+		return -EMSGSIZE;
+	case MAC_INVALID_GTS:
+	case MAC_PAST_TIME:
+		return -EBADSLT;
+	case MAC_INVALID_HANDLE:
+		return -EBADMSG;
+	case MAC_INVALID_PARAMETER:
+	case MAC_UNSUPPORTED_ATTRIBUTE:
+	case MAC_ON_TIME_TOO_LONG:
+	case MAC_INVALID_INDEX:
+		return -EINVAL;
+	case MAC_NO_DATA:
+		return -ENODATA;
+	case MAC_NO_SHORT_ADDRESS:
+		return -EFAULT;
+	case MAC_PAN_ID_CONFLICT:
+		return -EADDRINUSE;
+	case MAC_TRANSACTION_EXPIRED:
+		return -ETIME;
+	case MAC_TRANSACTION_OVERFLOW:
+		return -ENOBUFS;
+	case MAC_UNAVAILABLE_KEY:
+		return -ENOKEY;
+	case MAC_INVALID_ADDRESS:
+		return -ENXIO;
+	case MAC_TRACKING_OFF:
+	case MAC_SUPERFRAME_OVERLAP:
+		return -EREMOTEIO;
+	case MAC_LIMIT_REACHED:
+		return -EDQUOT;
+	case MAC_READ_ONLY:
+		return -EROFS;
+	default:
+		return -EPROTO;
+	}
+}
+
+/**
+ * ca8210_test_int_driver_write() - Writes a message to the test interface to be
+ *                                  read by the userspace
+ * @buf:  Buffer containing upstream message
+ * @len:  length of message to write
+ * @spi:  SPI device of message originator
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_test_int_driver_write(
+	const u8       *buf,
+	size_t          len,
+	void           *spi
+)
+{
+	struct ca8210_priv *priv = spi_get_drvdata(spi);
+	struct ca8210_test *test = &priv->test;
+	char *fifo_buffer;
+	int i;
+
+	dev_dbg(
+		&priv->spi->dev,
+		"test_interface: Buffering upstream message:\n"
+	);
+	for (i = 0; i < len; i++)
+		dev_dbg(&priv->spi->dev, "%#03x\n", buf[i]);
+
+	fifo_buffer = kmalloc(len, GFP_KERNEL);
+	memcpy(fifo_buffer, buf, len);
+	kfifo_in(&test->up_fifo, &fifo_buffer, 4);
+	wake_up_interruptible(&priv->test.readq);
+
+	return 0;
+}
+
+/* SPI Operation */
+
+static int ca8210_net_rx(
+	struct ieee802154_hw  *hw,
+	u8                    *command,
+	size_t                 len
+);
+static u8 mlme_reset_request_sync(
+	u8       set_default_pib,
+	void    *device_ref
+);
+static int ca8210_spi_transfer(
+	struct spi_device *spi,
+	const u8          *buf,
+	size_t             len
+);
+
+/**
+ * ca8210_reset_send() - Hard resets the ca8210 for a given time
+ * @spi:  Pointer to target ca8210 spi device
+ * @ms:   Milliseconds to hold the reset line low for
+ */
+static void ca8210_reset_send(struct spi_device *spi, unsigned int ms)
+{
+	struct ca8210_platform_data *pdata = spi->dev.platform_data;
+	struct ca8210_priv *priv = spi_get_drvdata(spi);
+	long status;
+
+	gpio_set_value(pdata->gpio_reset, 0);
+	reinit_completion(&priv->ca8210_is_awake);
+	msleep(ms);
+	gpio_set_value(pdata->gpio_reset, 1);
+
+	/* Wait until wakeup indication seen */
+	status = wait_for_completion_interruptible_timeout(
+		&priv->ca8210_is_awake,
+		msecs_to_jiffies(CA8210_SYNC_TIMEOUT)
+	);
+	if (status == 0) {
+		dev_crit(
+			&spi->dev,
+			"Fatal: No wakeup from ca8210 after reset!\n"
+		);
+	}
+
+	dev_dbg(&spi->dev, "Reset the device\n");
+}
+
+/**
+ * ca8210_mlme_reset_worker() - Resets the MLME, Called when the MAC OVERFLOW
+ *                              condition happens.
+ * @work:  Pointer to work being executed
+ */
+static void ca8210_mlme_reset_worker(struct work_struct *work)
+{
+	struct work_priv_container *wpc = container_of(
+		work,
+		struct work_priv_container,
+		work
+	);
+	struct ca8210_priv *priv = wpc->priv;
+
+	mlme_reset_request_sync(0, priv->spi);
+	kfree(wpc);
+}
+
+/**
+ * ca8210_rx_done() - Calls various message dispatches responding to a received
+ *                    command
+ * @arg:  Pointer to the cas_control object for the relevant spi transfer
+ *
+ * Presents a received SAP command from the ca8210 to the Cascoda EVBME, test
+ * interface and network driver.
+ */
+static void ca8210_rx_done(struct cas_control *cas_ctl)
+{
+	u8 *buf;
+	u8 len;
+	struct work_priv_container *mlme_reset_wpc;
+	struct ca8210_priv *priv = cas_ctl->priv;
+
+	buf = cas_ctl->tx_in_buf;
+	len = buf[1] + 2;
+	if (len > CA8210_SPI_BUF_SIZE) {
+		dev_crit(
+			&priv->spi->dev,
+			"Received packet len (%d) erroneously long\n",
+			len
+		);
+		goto finish;
+	}
+
+	if (buf[0] & SPI_SYN) {
+		if (mutex_lock_interruptible(&priv->sync_command_mutex))
+			goto finish;
+		if (priv->sync_command_pending) {
+			if (!priv->sync_command_response) {
+				priv->sync_command_pending = false;
+				mutex_unlock(&priv->sync_command_mutex);
+				dev_crit(
+					&priv->spi->dev,
+					"Sync command provided no response buffer\n"
+				);
+				goto finish;
+			}
+			memcpy(priv->sync_command_response, buf, len);
+			priv->sync_command_pending = false;
+			complete(&priv->sync_exchange_complete);
+			mutex_unlock(&priv->sync_command_mutex);
+		} else {
+			mutex_unlock(&priv->sync_command_mutex);
+			if (cascoda_api_upstream)
+				cascoda_api_upstream(buf, len, priv->spi);
+			priv->sync_up++;
+		}
+	} else {
+		if (cascoda_api_upstream)
+			cascoda_api_upstream(buf, len, priv->spi);
+	}
+
+	ca8210_net_rx(priv->hw, buf, len);
+	if (buf[0] == SPI_MCPS_DATA_CONFIRM) {
+		if (buf[3] == MAC_TRANSACTION_OVERFLOW) {
+			dev_info(
+				&priv->spi->dev,
+				"Waiting for transaction overflow to stabilise...\n");
+			msleep(2000);
+			dev_info(
+				&priv->spi->dev,
+				"Resetting MAC...\n");
+
+			mlme_reset_wpc = kmalloc(
+				sizeof(struct work_priv_container),
+				GFP_KERNEL
+			);
+			INIT_WORK(
+				&mlme_reset_wpc->work,
+				ca8210_mlme_reset_worker
+			);
+			mlme_reset_wpc->priv = priv;
+			queue_work(priv->mlme_workqueue, &mlme_reset_wpc->work);
+		}
+	} else if (buf[0] == SPI_HWME_WAKEUP_INDICATION) {
+		dev_notice(
+			&priv->spi->dev,
+			"Wakeup indication received, reason:\n"
+		);
+		switch (buf[2]) {
+		case 0:
+			dev_notice(
+				&priv->spi->dev,
+				"Transceiver woken up from Power Up / System Reset\n"
+			);
+			break;
+		case 1:
+			dev_notice(
+				&priv->spi->dev,
+				"Watchdog Timer Time-Out\n"
+			);
+			break;
+		case 2:
+			dev_notice(
+				&priv->spi->dev,
+				"Transceiver woken up from Power-Off by Sleep Timer Time-Out\n");
+			break;
+		case 3:
+			dev_notice(
+				&priv->spi->dev,
+				"Transceiver woken up from Power-Off by GPIO Activity\n"
+			);
+			break;
+		case 4:
+			dev_notice(
+				&priv->spi->dev,
+				"Transceiver woken up from Standby by Sleep Timer Time-Out\n"
+			);
+			break;
+		case 5:
+			dev_notice(
+				&priv->spi->dev,
+				"Transceiver woken up from Standby by GPIO Activity\n"
+			);
+			break;
+		case 6:
+			dev_notice(
+				&priv->spi->dev,
+				"Sleep-Timer Time-Out in Active Mode\n"
+			);
+			break;
+		default:
+			dev_warn(&priv->spi->dev, "Wakeup reason unknown\n");
+			break;
+		}
+		complete(&priv->ca8210_is_awake);
+	}
+
+finish:;
+}
+
+/**
+ * ca8210_spi_transfer_complete() - Called when a single spi transfer has
+ *                                  completed
+ * @context:  Pointer to the cas_control object for the finished transfer
+ */
+static void ca8210_spi_transfer_complete(void *context)
+{
+	struct cas_control *cas_ctl = context;
+	struct ca8210_priv *priv = cas_ctl->priv;
+	bool duplex_rx = false;
+	int i;
+	u8 retry_buffer[CA8210_SPI_BUF_SIZE];
+
+	if (
+		cas_ctl->tx_in_buf[0] == SPI_NACK &&
+		cas_ctl->tx_in_buf[1] == SPI_NACK
+	) {
+		/* ca8210 is busy */
+		dev_info(&priv->spi->dev, "ca8210 was busy during attempted write\n");
+		memcpy(retry_buffer, cas_ctl->tx_buf, CA8210_SPI_BUF_SIZE);
+		kfree(cas_ctl);
+		ca8210_spi_transfer(
+			priv->spi,
+			retry_buffer,
+			CA8210_SPI_BUF_SIZE
+		);
+		dev_info(&priv->spi->dev, "retried spi write\n");
+		return;
+	} else if (
+			cas_ctl->tx_in_buf[0] != SPI_IDLE &&
+			cas_ctl->tx_in_buf[0] != SPI_NACK
+		) {
+		duplex_rx = true;
+	}
+
+	if (duplex_rx) {
+		dev_dbg(&priv->spi->dev, "READ CMD DURING TX\n");
+		for (i = 0; i < cas_ctl->tx_in_buf[1] + 2; i++)
+			dev_dbg(
+				&priv->spi->dev,
+				"%#03x\n",
+				cas_ctl->tx_in_buf[i]
+			);
+		ca8210_rx_done(cas_ctl);
+	}
+	complete(&priv->spi_transfer_complete);
+	kfree(cas_ctl);
+}
+
+/**
+ * ca8210_spi_transfer() - Initiate duplex spi transfer with ca8210
+ * @spi: Pointer to spi device for transfer
+ * @buf: Octet array to send
+ * @len: length of the buffer being sent
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_spi_transfer(
+	struct spi_device  *spi,
+	const u8           *buf,
+	size_t              len
+)
+{
+	int i, status = 0;
+	struct ca8210_priv *priv = spi_get_drvdata(spi);
+	struct cas_control *cas_ctl;
+
+	if (!spi) {
+		dev_crit(
+			&spi->dev,
+			"NULL spi device passed to ca8210_spi_transfer\n"
+		);
+		return -ENODEV;
+	}
+
+	reinit_completion(&priv->spi_transfer_complete);
+
+	dev_dbg(&spi->dev, "ca8210_spi_transfer called\n");
+
+	cas_ctl = kmalloc(
+		sizeof(struct cas_control),
+		GFP_ATOMIC
+	);
+	cas_ctl->priv = priv;
+	memset(cas_ctl->tx_buf, SPI_IDLE, CA8210_SPI_BUF_SIZE);
+	memset(cas_ctl->tx_in_buf, SPI_IDLE, CA8210_SPI_BUF_SIZE);
+	memcpy(cas_ctl->tx_buf, buf, len);
+
+	for (i = 0; i < len; i++)
+		dev_dbg(&spi->dev, "%#03x\n", cas_ctl->tx_buf[i]);
+
+	spi_message_init(&cas_ctl->msg);
+
+	cas_ctl->transfer.tx_nbits = 1; /* 1 MOSI line */
+	cas_ctl->transfer.rx_nbits = 1; /* 1 MISO line */
+	cas_ctl->transfer.speed_hz = 0; /* Use device setting */
+	cas_ctl->transfer.bits_per_word = 0; /* Use device setting */
+	cas_ctl->transfer.tx_buf = cas_ctl->tx_buf;
+	cas_ctl->transfer.rx_buf = cas_ctl->tx_in_buf;
+	cas_ctl->transfer.delay_usecs = 0;
+	cas_ctl->transfer.cs_change = 0;
+	cas_ctl->transfer.len = sizeof(struct mac_message);
+	cas_ctl->msg.complete = ca8210_spi_transfer_complete;
+	cas_ctl->msg.context = cas_ctl;
+
+	spi_message_add_tail(
+		&cas_ctl->transfer,
+		&cas_ctl->msg
+	);
+
+	status = spi_async(spi, &cas_ctl->msg);
+	if (status < 0) {
+		dev_crit(
+			&spi->dev,
+			"status %d from spi_sync in write\n",
+			status
+		);
+	}
+
+	return status;
+}
+
+/**
+ * ca8210_spi_exchange() - Exchange API/SAP commands with the radio
+ * @buf:         Octet array of command being sent downstream
+ * @len:         length of buf
+ * @response:    buffer for storing synchronous response
+ * @device_ref:  spi_device pointer for ca8210
+ *
+ * Effectively calls ca8210_spi_transfer to write buf[] to the spi, then for
+ * synchronous commands waits for the corresponding response to be read from
+ * the spi before returning. The response is written to the response parameter.
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_spi_exchange(
+	const u8 *buf,
+	size_t len,
+	u8 *response,
+	void *device_ref
+)
+{
+	int status = 0;
+	struct spi_device *spi = device_ref;
+	struct ca8210_priv *priv = spi->dev.driver_data;
+	long wait_remaining;
+
+	if ((buf[0] & SPI_SYN) && response) { /* if sync lock mutex */
+		if (mutex_lock_interruptible(&priv->sync_command_mutex)) {
+			status = -ERESTARTSYS;
+			goto cleanup;
+		}
+	}
+
+	do {
+		reinit_completion(&priv->spi_transfer_complete);
+		status = ca8210_spi_transfer(priv->spi, buf, len);
+		if (status) {
+			dev_warn(
+				&spi->dev,
+				"spi write failed, returned %d\n",
+				status
+			);
+			if (status == -EBUSY)
+				continue;
+			if (((buf[0] & SPI_SYN) && response))
+				mutex_unlock(&priv->sync_command_mutex);
+			goto cleanup;
+		}
+
+		wait_for_completion_interruptible(&priv->spi_transfer_complete);
+	} while (status < 0);
+
+	if (!((buf[0] & SPI_SYN) && response))
+		goto cleanup;
+
+	/* if sync wait for confirm */
+	priv->sync_command_response = response;
+	priv->sync_command_pending = true;
+	reinit_completion(&priv->sync_exchange_complete);
+	mutex_unlock(&priv->sync_command_mutex);
+	wait_remaining = wait_for_completion_interruptible_timeout(
+		&priv->sync_exchange_complete,
+		msecs_to_jiffies(CA8210_SYNC_TIMEOUT)
+	);
+	if (wait_remaining == -ERESTARTSYS) {
+		status = -ERESTARTSYS;
+	} else if (wait_remaining == 0) {
+		dev_err(
+			&spi->dev,
+			"Synchronous confirm timeout\n"
+		);
+		status = -ETIME;
+	}
+	priv->sync_command_response = NULL;
+
+cleanup:
+	return status;
+}
+
+/**
+ * ca8210_interrupt_handler() - Called when an irq is received from the ca8210
+ * @irq:     Id of the irq being handled
+ * @dev_id:  Pointer passed by the system, pointing to the ca8210's private data
+ *
+ * This function is called when the irq line from the ca8210 is asserted,
+ * signifying that the ca8210 has a message to send upstream to us. Starts the
+ * asynchronous spi read.
+ *
+ * Return: irq return code
+ */
+static irqreturn_t ca8210_interrupt_handler(int irq, void *dev_id)
+{
+	struct ca8210_priv *priv = dev_id;
+	int status;
+
+	dev_dbg(&priv->spi->dev, "irq: Interrupt occurred\n");
+	do {
+		status = ca8210_spi_transfer(priv->spi, NULL, 0);
+		if (status && (status != -EBUSY)) {
+			dev_warn(
+				&priv->spi->dev,
+				"spi read failed, returned %d\n",
+				status
+			);
+		}
+	} while (status == -EBUSY);
+	return IRQ_HANDLED;
+}
+
+static int (*cascoda_api_downstream)(
+	const u8 *buf,
+	size_t len,
+	u8 *response,
+	void *device_ref
+) = ca8210_spi_exchange;
+
+/* Cascoda API / 15.4 SAP Primitives */
+
+/**
+ * tdme_setsfr_request_sync() - TDME_SETSFR_request/confirm according to API
+ * @sfr_page:    SFR Page
+ * @sfr_address: SFR Address
+ * @sfr_value:   SFR Value
+ * @device_ref:  Nondescript pointer to target device
+ *
+ * Return: 802.15.4 status code of TDME-SETSFR.confirm
+ */
+static u8 tdme_setsfr_request_sync(
+	u8            sfr_page,
+	u8            sfr_address,
+	u8            sfr_value,
+	void         *device_ref
+)
+{
+	int ret;
+	struct mac_message command, response;
+	struct spi_device *spi = device_ref;
+
+	command.command_id = SPI_TDME_SETSFR_REQUEST;
+	command.length = 3;
+	command.pdata.tdme_set_sfr_req.sfr_page    = sfr_page;
+	command.pdata.tdme_set_sfr_req.sfr_address = sfr_address;
+	command.pdata.tdme_set_sfr_req.sfr_value   = sfr_value;
+	response.command_id = SPI_IDLE;
+	ret = cascoda_api_downstream(
+		&command.command_id,
+		command.length + 2,
+		&response.command_id,
+		device_ref
+	);
+	if (ret) {
+		dev_crit(&spi->dev, "cascoda_api_downstream returned %d", ret);
+		return MAC_SYSTEM_ERROR;
+	}
+
+	if (response.command_id != SPI_TDME_SETSFR_CONFIRM) {
+		dev_crit(
+			&spi->dev,
+			"sync response to SPI_TDME_SETSFR_REQUEST was not SPI_TDME_SETSFR_CONFIRM, it was %d\n",
+			response.command_id
+		);
+		return MAC_SYSTEM_ERROR;
+	}
+
+	return response.pdata.tdme_set_sfr_cnf.status;
+}
+
+/**
+ * tdme_chipinit() - TDME Chip Register Default Initialisation Macro
+ * @device_ref: Nondescript pointer to target device
+ *
+ * Return: 802.15.4 status code of API calls
+ */
+static u8 tdme_chipinit(void *device_ref)
+{
+	u8 status = MAC_SUCCESS;
+	u8 sfr_address;
+	struct spi_device *spi = device_ref;
+	struct preamble_cfg_sfr pre_cfg_value = {
+		.timeout_symbols     = 3,
+		.acquisition_symbols = 3,
+		.search_symbols      = 1,
+	};
+	/* LNA Gain Settings */
+	status = tdme_setsfr_request_sync(
+		1, (sfr_address = CA8210_SFR_LNAGX40),
+		LNAGX40_DEFAULT_GAIN, device_ref);
+	if (status)
+		goto finish;
+	status = tdme_setsfr_request_sync(
+		1, (sfr_address = CA8210_SFR_LNAGX41),
+		LNAGX41_DEFAULT_GAIN, device_ref);
+	if (status)
+		goto finish;
+	status = tdme_setsfr_request_sync(
+		1, (sfr_address = CA8210_SFR_LNAGX42),
+		LNAGX42_DEFAULT_GAIN, device_ref);
+	if (status)
+		goto finish;
+	status = tdme_setsfr_request_sync(
+		1, (sfr_address = CA8210_SFR_LNAGX43),
+		LNAGX43_DEFAULT_GAIN, device_ref);
+	if (status)
+		goto finish;
+	status = tdme_setsfr_request_sync(
+		1, (sfr_address = CA8210_SFR_LNAGX44),
+		LNAGX44_DEFAULT_GAIN, device_ref);
+	if (status)
+		goto finish;
+	status = tdme_setsfr_request_sync(
+		1, (sfr_address = CA8210_SFR_LNAGX45),
+		LNAGX45_DEFAULT_GAIN, device_ref);
+	if (status)
+		goto finish;
+	status = tdme_setsfr_request_sync(
+		1, (sfr_address = CA8210_SFR_LNAGX46),
+		LNAGX46_DEFAULT_GAIN, device_ref);
+	if (status)
+		goto finish;
+	status = tdme_setsfr_request_sync(
+		1, (sfr_address = CA8210_SFR_LNAGX47),
+		LNAGX47_DEFAULT_GAIN, device_ref);
+	if (status)
+		goto finish;
+	/* Preamble Timing Config */
+	status = tdme_setsfr_request_sync(
+		1, (sfr_address = CA8210_SFR_PRECFG),
+		*((u8 *)&pre_cfg_value), device_ref);
+	if (status)
+		goto finish;
+	/* Preamble Threshold High */
+	status = tdme_setsfr_request_sync(
+		1, (sfr_address = CA8210_SFR_PTHRH),
+		PTHRH_DEFAULT_THRESHOLD, device_ref);
+	if (status)
+		goto finish;
+	/* Tx Output Power 8 dBm */
+	status = tdme_setsfr_request_sync(
+		0, (sfr_address = CA8210_SFR_PACFGIB),
+		PACFGIB_DEFAULT_CURRENT, device_ref);
+	if (status)
+		goto finish;
+
+finish:
+	if (status != MAC_SUCCESS) {
+		dev_err(
+			&spi->dev,
+			"failed to set sfr at %#03x, status = %#03x\n",
+			sfr_address,
+			status
+		);
+	}
+	return status;
+}
+
+/**
+ * tdme_channelinit() - TDME Channel Register Default Initialisation Macro (Tx)
+ * @channel:    802.15.4 channel to initialise chip for
+ * @device_ref: Nondescript pointer to target device
+ *
+ * Return: 802.15.4 status code of API calls
+ */
+static u8 tdme_channelinit(u8 channel, void *device_ref)
+{
+	/* Transceiver front-end local oscillator tx two-point calibration
+	 * value. Tuned for the hardware.
+	 */
+	u8 txcalval;
+
+	if (channel >= 25)
+		txcalval = 0xA7;
+	else if (channel >= 23)
+		txcalval = 0xA8;
+	else if (channel >= 22)
+		txcalval = 0xA9;
+	else if (channel >= 20)
+		txcalval = 0xAA;
+	else if (channel >= 17)
+		txcalval = 0xAB;
+	else if (channel >= 16)
+		txcalval = 0xAC;
+	else if (channel >= 14)
+		txcalval = 0xAD;
+	else if (channel >= 12)
+		txcalval = 0xAE;
+	else
+		txcalval = 0xAF;
+
+	return tdme_setsfr_request_sync(
+		1,
+		CA8210_SFR_LOTXCAL,
+		txcalval,
+		device_ref
+	);  /* LO Tx Cal */
+}
+
+/**
+ * tdme_checkpibattribute() - Checks Attribute Values that are not checked in
+ *                            MAC
+ * @pib_attribute:        Attribute Number
+ * @pib_attribute_length: Attribute length
+ * @pib_attribute_value:  Pointer to Attribute Value
+ * @device_ref:           Nondescript pointer to target device
+ *
+ * Return: 802.15.4 status code of checks
+ */
+static u8 tdme_checkpibattribute(
+	u8            pib_attribute,
+	u8            pib_attribute_length,
+	const void   *pib_attribute_value
+)
+{
+	u8 status = MAC_SUCCESS;
+	u8 value;
+
+	value  = *((u8 *)pib_attribute_value);
+
+	switch (pib_attribute) {
+	/* PHY */
+	case PHY_TRANSMIT_POWER:
+		if (value > 0x3F)
+			status = MAC_INVALID_PARAMETER;
+		break;
+	case PHY_CCA_MODE:
+		if (value > 0x03)
+			status = MAC_INVALID_PARAMETER;
+		break;
+	/* MAC */
+	case MAC_BATT_LIFE_EXT_PERIODS:
+		if ((value < 6) || (value > 41))
+			status = MAC_INVALID_PARAMETER;
+		break;
+	case MAC_BEACON_PAYLOAD:
+		if (pib_attribute_length > MAX_BEACON_PAYLOAD_LENGTH)
+			status = MAC_INVALID_PARAMETER;
+		break;
+	case MAC_BEACON_PAYLOAD_LENGTH:
+		if (value > MAX_BEACON_PAYLOAD_LENGTH)
+			status = MAC_INVALID_PARAMETER;
+		break;
+	case MAC_BEACON_ORDER:
+		if (value > 15)
+			status = MAC_INVALID_PARAMETER;
+		break;
+	case MAC_MAX_BE:
+		if ((value < 3) || (value > 8))
+			status = MAC_INVALID_PARAMETER;
+		break;
+	case MAC_MAX_CSMA_BACKOFFS:
+		if (value > 5)
+			status = MAC_INVALID_PARAMETER;
+		break;
+	case MAC_MAX_FRAME_RETRIES:
+		if (value > 7)
+			status = MAC_INVALID_PARAMETER;
+		break;
+	case MAC_MIN_BE:
+		if (value > 8)
+			status = MAC_INVALID_PARAMETER;
+		break;
+	case MAC_RESPONSE_WAIT_TIME:
+		if ((value < 2) || (value > 64))
+			status = MAC_INVALID_PARAMETER;
+		break;
+	case MAC_SUPERFRAME_ORDER:
+		if (value > 15)
+			status = MAC_INVALID_PARAMETER;
+		break;
+	/* boolean */
+	case MAC_ASSOCIATED_PAN_COORD:
+	case MAC_ASSOCIATION_PERMIT:
+	case MAC_AUTO_REQUEST:
+	case MAC_BATT_LIFE_EXT:
+	case MAC_GTS_PERMIT:
+	case MAC_PROMISCUOUS_MODE:
+	case MAC_RX_ON_WHEN_IDLE:
+	case MAC_SECURITY_ENABLED:
+		if (value > 1)
+			status = MAC_INVALID_PARAMETER;
+		break;
+	/* MAC SEC */
+	case MAC_AUTO_REQUEST_SECURITY_LEVEL:
+		if (value > 7)
+			status = MAC_INVALID_PARAMETER;
+		break;
+	case MAC_AUTO_REQUEST_KEY_ID_MODE:
+		if (value > 3)
+			status = MAC_INVALID_PARAMETER;
+		break;
+	default:
+		break;
+	}
+
+	return status;
+}
+
+/**
+ * tdme_settxpower() - Sets the tx power for MLME_SET phyTransmitPower
+ * @txp:        Transmit Power
+ * @device_ref: Nondescript pointer to target device
+ *
+ * Normalised to 802.15.4 Definition (6-bit, signed):
+ * Bit 7-6: not used
+ * Bit 5-0: tx power (-32 - +31 dB)
+ *
+ * Return: 802.15.4 status code of api calls
+ */
+static u8 tdme_settxpower(u8 txp, void *device_ref)
+{
+	u8 status;
+	s8 txp_val;
+	u8 txp_ext;
+	union pa_cfg_sfr pa_cfg_val;
+
+	/* extend from 6 to 8 bit */
+	txp_ext = 0x3F & txp;
+	if (txp_ext & 0x20)
+		txp_ext += 0xC0;
+	txp_val = (s8)txp_ext;
+
+	if (CA8210_MAC_MPW) {
+		if (txp_val > 0) {
+			/* 8 dBm: ptrim = 5, itrim = +3 => +4 dBm */
+			pa_cfg_val.bias_current_trim     = 3;
+			pa_cfg_val.buffer_capacitor_trim = 5;
+			pa_cfg_val.boost                 = 1;
+		} else {
+			/* 0 dBm: ptrim = 7, itrim = +3 => -6 dBm */
+			pa_cfg_val.bias_current_trim     = 3;
+			pa_cfg_val.buffer_capacitor_trim = 7;
+			pa_cfg_val.boost                 = 0;
+		}
+		/* write PACFG */
+		status = tdme_setsfr_request_sync(
+			0,
+			CA8210_SFR_PACFG,
+			pa_cfg_val.paib,
+			device_ref
+		);
+	} else {
+		/* Look-Up Table for Setting Current and Frequency Trim values
+		 * for desired Output Power
+		 */
+		if (txp_val > 8) {
+			pa_cfg_val.paib = 0x3F;
+		} else if (txp_val == 8) {
+			pa_cfg_val.paib = 0x32;
+		} else if (txp_val == 7) {
+			pa_cfg_val.paib = 0x22;
+		} else if (txp_val == 6) {
+			pa_cfg_val.paib = 0x18;
+		} else if (txp_val == 5) {
+			pa_cfg_val.paib = 0x10;
+		} else if (txp_val == 4) {
+			pa_cfg_val.paib = 0x0C;
+		} else if (txp_val == 3) {
+			pa_cfg_val.paib = 0x08;
+		} else if (txp_val == 2) {
+			pa_cfg_val.paib = 0x05;
+		} else if (txp_val == 1) {
+			pa_cfg_val.paib = 0x03;
+		} else if (txp_val == 0) {
+			pa_cfg_val.paib = 0x01;
+		} else { /* < 0 */
+			pa_cfg_val.paib = 0x00;
+		}
+		/* write PACFGIB */
+		status = tdme_setsfr_request_sync(
+			0,
+			CA8210_SFR_PACFGIB,
+			pa_cfg_val.paib,
+			device_ref
+		);
+	}
+
+	return status;
+}
+
+/**
+ * mcps_data_request() - mcps_data_request (Send Data) according to API Spec
+ * @src_addr_mode:    Source Addressing Mode
+ * @dst_address_mode: Destination Addressing Mode
+ * @dst_pan_id:       Destination PAN ID
+ * @dst_addr:         Pointer to Destination Address
+ * @msdu_length:      length of Data
+ * @msdu:             Pointer to Data
+ * @msdu_handle:      Handle of Data
+ * @tx_options:       Tx Options Bit Field
+ * @security:         Pointer to Security Structure or NULL
+ * @device_ref:       Nondescript pointer to target device
+ *
+ * Return: 802.15.4 status code of action
+ */
+static u8 mcps_data_request(
+	u8               src_addr_mode,
+	u8               dst_address_mode,
+	u16              dst_pan_id,
+	union macaddr   *dst_addr,
+	u8               msdu_length,
+	u8              *msdu,
+	u8               msdu_handle,
+	u8               tx_options,
+	struct secspec  *security,
+	void            *device_ref
+)
+{
+	struct secspec *psec;
+	struct mac_message command;
+
+	command.command_id = SPI_MCPS_DATA_REQUEST;
+	command.pdata.data_req.src_addr_mode = src_addr_mode;
+	command.pdata.data_req.dst.mode = dst_address_mode;
+	if (dst_address_mode != MAC_MODE_NO_ADDR) {
+		command.pdata.data_req.dst.pan_id[0] = LS_BYTE(dst_pan_id);
+		command.pdata.data_req.dst.pan_id[1] = MS_BYTE(dst_pan_id);
+		if (dst_address_mode == MAC_MODE_SHORT_ADDR) {
+			command.pdata.data_req.dst.address[0] = LS_BYTE(
+				dst_addr->short_address
+			);
+			command.pdata.data_req.dst.address[1] = MS_BYTE(
+				dst_addr->short_address
+			);
+		} else {   /* MAC_MODE_LONG_ADDR*/
+			memcpy(
+				command.pdata.data_req.dst.address,
+				dst_addr->ieee_address,
+				8
+			);
+		}
+	}
+	command.pdata.data_req.msdu_length = msdu_length;
+	command.pdata.data_req.msdu_handle = msdu_handle;
+	command.pdata.data_req.tx_options = tx_options;
+	memcpy(command.pdata.data_req.msdu, msdu, msdu_length);
+	psec = (struct secspec *)(command.pdata.data_req.msdu + msdu_length);
+	command.length = sizeof(struct mcps_data_request_pset) -
+		MAX_DATA_SIZE + msdu_length;
+	if (!security || (security->security_level == 0)) {
+		psec->security_level = 0;
+		command.length += 1;
+	} else {
+		*psec = *security;
+		command.length += sizeof(struct secspec);
+	}
+
+	if (ca8210_spi_transfer(
+		device_ref, &command.command_id, command.length + 2)
+	)
+		return MAC_SYSTEM_ERROR;
+
+	return MAC_SUCCESS;
+}
+
+/**
+ * mlme_reset_request_sync() - MLME_RESET_request/confirm according to API Spec
+ * @set_default_pib: Set defaults in PIB
+ * @device_ref:      Nondescript pointer to target device
+ *
+ * Return: 802.15.4 status code of MLME-RESET.confirm
+ */
+static u8 mlme_reset_request_sync(
+	u8    set_default_pib,
+	void *device_ref
+)
+{
+	u8 status;
+	struct mac_message command, response;
+	struct spi_device *spi = device_ref;
+
+	command.command_id = SPI_MLME_RESET_REQUEST;
+	command.length = 1;
+	command.pdata.u8param = set_default_pib;
+
+	if (cascoda_api_downstream(
+		&command.command_id,
+		command.length + 2,
+		&response.command_id,
+		device_ref)) {
+		dev_err(&spi->dev, "cascoda_api_downstream failed\n");
+		return MAC_SYSTEM_ERROR;
+	}
+
+	if (response.command_id != SPI_MLME_RESET_CONFIRM)
+		return MAC_SYSTEM_ERROR;
+
+	status = response.pdata.status;
+
+	/* reset COORD Bit for Channel Filtering as Coordinator */
+	if (CA8210_MAC_WORKAROUNDS && set_default_pib && (!status)) {
+		status = tdme_setsfr_request_sync(
+			0,
+			CA8210_SFR_MACCON,
+			0,
+			device_ref
+		);
+	}
+
+	return status;
+}
+
+/**
+ * mlme_set_request_sync() - MLME_SET_request/confirm according to API Spec
+ * @pib_attribute:        Attribute Number
+ * @pib_attribute_index:  Index within Attribute if an Array
+ * @pib_attribute_length: Attribute length
+ * @pib_attribute_value:  Pointer to Attribute Value
+ * @device_ref:           Nondescript pointer to target device
+ *
+ * Return: 802.15.4 status code of MLME-SET.confirm
+ */
+static u8 mlme_set_request_sync(
+	u8            pib_attribute,
+	u8            pib_attribute_index,
+	u8            pib_attribute_length,
+	const void   *pib_attribute_value,
+	void         *device_ref
+)
+{
+	u8 status;
+	struct mac_message command, response;
+
+	/* pre-check the validity of pib_attribute values that are not checked
+	 * in MAC
+	 */
+	if (tdme_checkpibattribute(
+		pib_attribute, pib_attribute_length, pib_attribute_value)) {
+		return MAC_INVALID_PARAMETER;
+	}
+
+	if (pib_attribute == PHY_CURRENT_CHANNEL) {
+		status = tdme_channelinit(
+			*((u8 *)pib_attribute_value),
+			device_ref
+		);
+		if (status)
+			return status;
+	}
+
+	if (pib_attribute == PHY_TRANSMIT_POWER) {
+		return tdme_settxpower(
+			*((u8 *)pib_attribute_value),
+			device_ref
+		);
+	}
+
+	command.command_id = SPI_MLME_SET_REQUEST;
+	command.length = sizeof(struct mlme_set_request_pset) -
+		MAX_ATTRIBUTE_SIZE + pib_attribute_length;
+	command.pdata.set_req.pib_attribute = pib_attribute;
+	command.pdata.set_req.pib_attribute_index = pib_attribute_index;
+	command.pdata.set_req.pib_attribute_length = pib_attribute_length;
+	memcpy(
+		command.pdata.set_req.pib_attribute_value,
+		pib_attribute_value,
+		pib_attribute_length
+	);
+
+	if (cascoda_api_downstream(
+		&command.command_id,
+		command.length + 2,
+		&response.command_id,
+		device_ref)) {
+		return MAC_SYSTEM_ERROR;
+	}
+
+	if (response.command_id != SPI_MLME_SET_CONFIRM)
+		return MAC_SYSTEM_ERROR;
+
+	return response.pdata.status;
+}
+
+/**
+ * hwme_set_request_sync() - HWME_SET_request/confirm according to API Spec
+ * @hw_attribute:        Attribute Number
+ * @hw_attribute_length: Attribute length
+ * @hw_attribute_value:  Pointer to Attribute Value
+ * @device_ref:          Nondescript pointer to target device
+ *
+ * Return: 802.15.4 status code of HWME-SET.confirm
+ */
+static u8 hwme_set_request_sync(
+	u8           hw_attribute,
+	u8           hw_attribute_length,
+	u8          *hw_attribute_value,
+	void        *device_ref
+)
+{
+	struct mac_message command, response;
+
+	command.command_id = SPI_HWME_SET_REQUEST;
+	command.length = 2 + hw_attribute_length;
+	command.pdata.hwme_set_req.hw_attribute = hw_attribute;
+	command.pdata.hwme_set_req.hw_attribute_length = hw_attribute_length;
+	memcpy(
+		command.pdata.hwme_set_req.hw_attribute_value,
+		hw_attribute_value,
+		hw_attribute_length
+	);
+
+	if (cascoda_api_downstream(
+		&command.command_id,
+		command.length + 2,
+		&response.command_id,
+		device_ref)) {
+		return MAC_SYSTEM_ERROR;
+	}
+
+	if (response.command_id != SPI_HWME_SET_CONFIRM)
+		return MAC_SYSTEM_ERROR;
+
+	return response.pdata.hwme_set_cnf.status;
+}
+
+/**
+ * hwme_get_request_sync() - HWME_GET_request/confirm according to API Spec
+ * @hw_attribute:        Attribute Number
+ * @hw_attribute_length: Attribute length
+ * @hw_attribute_value:  Pointer to Attribute Value
+ * @device_ref:          Nondescript pointer to target device
+ *
+ * Return: 802.15.4 status code of HWME-GET.confirm
+ */
+static u8 hwme_get_request_sync(
+	u8           hw_attribute,
+	u8          *hw_attribute_length,
+	u8          *hw_attribute_value,
+	void        *device_ref
+)
+{
+	struct mac_message command, response;
+
+	command.command_id = SPI_HWME_GET_REQUEST;
+	command.length = 1;
+	command.pdata.hwme_get_req.hw_attribute = hw_attribute;
+
+	if (cascoda_api_downstream(
+		&command.command_id,
+		command.length + 2,
+		&response.command_id,
+		device_ref)) {
+		return MAC_SYSTEM_ERROR;
+	}
+
+	if (response.command_id != SPI_HWME_GET_CONFIRM)
+		return MAC_SYSTEM_ERROR;
+
+	if (response.pdata.hwme_get_cnf.status == MAC_SUCCESS) {
+		*hw_attribute_length =
+			response.pdata.hwme_get_cnf.hw_attribute_length;
+		memcpy(
+			hw_attribute_value,
+			response.pdata.hwme_get_cnf.hw_attribute_value,
+			*hw_attribute_length
+		);
+	}
+
+	return response.pdata.hwme_get_cnf.status;
+}
+
+/* Network driver operation */
+
+/**
+ * ca8210_async_xmit_complete() - Called to announce that an asynchronous
+ *                                transmission has finished
+ * @hw:          ieee802154_hw of ca8210 that has finished exchange
+ * @msduhandle:  Identifier of transmission that has completed
+ * @status:      Returned 802.15.4 status code of the transmission
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_async_xmit_complete(
+	struct ieee802154_hw  *hw,
+	u8                     msduhandle,
+	u8                     status)
+{
+	struct ca8210_priv *priv = hw->priv;
+
+	if (priv->nextmsduhandle != msduhandle) {
+		dev_err(
+			&priv->spi->dev,
+			"Unexpected msdu_handle on data confirm, Expected %d, got %d\n",
+			priv->nextmsduhandle,
+			msduhandle
+		);
+		return -EIO;
+	}
+
+	/* stop timeout work */
+	if (!cancel_delayed_work_sync(&priv->async_tx_timeout_work)) {
+		dev_err(
+			&priv->spi->dev,
+			"async tx timeout wasn't pending when transfer complete\n"
+		);
+	}
+
+	priv->async_tx_pending = false;
+	priv->nextmsduhandle++;
+
+	if (status) {
+		dev_err(
+			&priv->spi->dev,
+			"Link transmission unsuccessful, status = %d\n",
+			status
+		);
+		if (status != MAC_TRANSACTION_OVERFLOW) {
+			ieee802154_wake_queue(priv->hw);
+			return 0;
+		}
+	}
+	ieee802154_xmit_complete(priv->hw, priv->tx_skb, true);
+
+	return 0;
+}
+
+/**
+ * ca8210_skb_rx() - Contructs a properly framed socket buffer from a received
+ *                   MCPS_DATA_indication
+ * @hw:        ieee802154_hw that MCPS_DATA_indication was received by
+ * @len:       length of MCPS_DATA_indication
+ * @data_ind:  Octet array of MCPS_DATA_indication
+ *
+ * Called by the spi driver whenever a SAP command is received, this function
+ * will ascertain whether the command is of interest to the network driver and
+ * take necessary action.
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_skb_rx(
+	struct ieee802154_hw  *hw,
+	size_t                 len,
+	u8                    *data_ind
+)
+{
+	struct ieee802154_hdr hdr;
+	int msdulen;
+	int hlen;
+	struct sk_buff *skb;
+	struct ca8210_priv *priv = hw->priv;
+
+	/* Allocate mtu size buffer for every rx packet */
+	skb = dev_alloc_skb(IEEE802154_MTU + sizeof(hdr));
+	if (!skb) {
+		dev_crit(&priv->spi->dev, "dev_alloc_skb failed\n");
+		return -ENOMEM;
+	}
+	skb_reserve(skb, sizeof(hdr));
+
+	msdulen = data_ind[22]; /* msdu_length */
+	if (msdulen > IEEE802154_MTU) {
+		dev_err(
+			&priv->spi->dev,
+			"received erroneously large msdu length!\n"
+		);
+		kfree_skb(skb);
+		return -EMSGSIZE;
+	}
+	dev_dbg(&priv->spi->dev, "skb buffer length = %d\n", msdulen);
+
+	/* Populate hdr */
+	hdr.sec.level = data_ind[29 + msdulen];
+	dev_dbg(&priv->spi->dev, "security level: %#03x\n", hdr.sec.level);
+	if (hdr.sec.level > 0) {
+		hdr.sec.key_id_mode = data_ind[30 + msdulen];
+		memcpy(&hdr.sec.extended_src, &data_ind[31 + msdulen], 8);
+		hdr.sec.key_id = data_ind[39 + msdulen];
+	}
+	hdr.source.mode = data_ind[0];
+	dev_dbg(&priv->spi->dev, "srcAddrMode: %#03x\n", hdr.source.mode);
+	hdr.source.pan_id = *(u16 *)&data_ind[1];
+	dev_dbg(&priv->spi->dev, "srcPanId: %#06x\n", hdr.source.pan_id);
+	memcpy(&hdr.source.extended_addr, &data_ind[3], 8);
+	hdr.dest.mode = data_ind[11];
+	dev_dbg(&priv->spi->dev, "dstAddrMode: %#03x\n", hdr.dest.mode);
+	hdr.dest.pan_id = *(u16 *)&data_ind[12];
+	dev_dbg(&priv->spi->dev, "dstPanId: %#06x\n", hdr.dest.pan_id);
+	memcpy(&hdr.dest.extended_addr, &data_ind[14], 8);
+
+	/* Fill in FC implicitly */
+	hdr.fc.type = 1; /* Data frame */
+	if (hdr.sec.level)
+		hdr.fc.security_enabled = 1;
+	else
+		hdr.fc.security_enabled = 0;
+	if (data_ind[1] != data_ind[12] || data_ind[2] != data_ind[13])
+		hdr.fc.intra_pan = 1;
+	else
+		hdr.fc.intra_pan = 0;
+	hdr.fc.dest_addr_mode = hdr.dest.mode;
+	hdr.fc.source_addr_mode = hdr.source.mode;
+
+	/* Add hdr to front of buffer */
+	hlen = ieee802154_hdr_push(skb, &hdr);
+
+	if (hlen < 0) {
+		dev_crit(&priv->spi->dev, "failed to push mac hdr onto skb!\n");
+		kfree_skb(skb);
+		return hlen;
+	}
+
+	skb_reset_mac_header(skb);
+	skb->mac_len = hlen;
+
+	/* Add <msdulen> bytes of space to the back of the buffer */
+	/* Copy msdu to skb */
+	memcpy(skb_put(skb, msdulen), &data_ind[29], msdulen);
+
+	ieee802154_rx_irqsafe(hw, skb, data_ind[23]/*LQI*/);
+	/* TODO: Set protocol & checksum? */
+	/* TODO: update statistics */
+	return 0;
+}
+
+/**
+ * ca8210_net_rx() - Acts upon received SAP commands relevant to the network
+ *                   driver
+ * @hw:       ieee802154_hw that command was received by
+ * @command:  Octet array of received command
+ * @len:      length of the received command
+ *
+ * Called by the spi driver whenever a SAP command is received, this function
+ * will ascertain whether the command is of interest to the network driver and
+ * take necessary action.
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_net_rx(struct ieee802154_hw *hw, u8 *command, size_t len)
+{
+	struct ca8210_priv *priv = hw->priv;
+	unsigned long flags;
+	u8 status;
+
+	dev_dbg(&priv->spi->dev, "ca8210_net_rx(), CmdID = %d\n", command[0]);
+
+	if (command[0] == SPI_MCPS_DATA_INDICATION) {
+		/* Received data */
+		spin_lock_irqsave(&priv->lock, flags);
+		if (command[26] == priv->last_dsn) {
+			dev_dbg(
+				&priv->spi->dev,
+				"DSN %d resend received, ignoring...\n",
+				command[26]
+			);
+			spin_unlock_irqrestore(&priv->lock, flags);
+			return 0;
+		}
+		priv->last_dsn = command[26];
+		spin_unlock_irqrestore(&priv->lock, flags);
+		return ca8210_skb_rx(hw, len - 2, command + 2);
+	} else if (command[0] == SPI_MCPS_DATA_CONFIRM) {
+		status = command[3];
+		if (priv->async_tx_pending) {
+			return ca8210_async_xmit_complete(
+				hw,
+				command[2],
+				status
+			);
+		} else if (priv->sync_tx_pending) {
+			priv->sync_tx_pending = false;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * ca8210_skb_tx() - Transmits a given socket buffer using the ca8210
+ * @skb:         Socket buffer to transmit
+ * @msduhandle:  Data identifier to pass to the 802.15.4 MAC
+ * @priv:        Pointer to private data section of target ca8210
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_skb_tx(
+	struct sk_buff      *skb,
+	u8                   msduhandle,
+	struct ca8210_priv  *priv
+)
+{
+	int status;
+	struct ieee802154_hdr header = { 0 };
+	struct secspec secspec;
+	unsigned int mac_len;
+
+	dev_dbg(&priv->spi->dev, "ca8210_skb_tx() called\n");
+
+	/* Get addressing info from skb - ieee802154 layer creates a full
+	 * packet
+	 */
+	mac_len = ieee802154_hdr_peek_addrs(skb, &header);
+
+	secspec.security_level = header.sec.level;
+	secspec.key_id_mode = header.sec.key_id_mode;
+	if (secspec.key_id_mode == 2)
+		memcpy(secspec.key_source, &header.sec.short_src, 4);
+	else if (secspec.key_id_mode == 3)
+		memcpy(secspec.key_source, &header.sec.extended_src, 8);
+	secspec.key_index = header.sec.key_id;
+
+	/* Pass to Cascoda API */
+	status =  mcps_data_request(
+		header.source.mode,
+		header.dest.mode,
+		header.dest.pan_id,
+		(union macaddr *)&header.dest.extended_addr,
+		skb->len - mac_len,
+		&skb->data[mac_len],
+		msduhandle,
+		header.fc.ack_request,
+		&secspec,
+		priv->spi
+	);
+	return link_to_linux_err(status);
+}
+
+/**
+ * ca8210_async_tx_timeout_worker() - Executed when an asynchronous transmission
+ *                                    times out
+ * @work:  Work being executed
+ */
+static void ca8210_async_tx_timeout_worker(struct work_struct *work)
+{
+	struct delayed_work *del_work = container_of(
+		work,
+		struct delayed_work,
+		work
+	);
+	struct ca8210_priv *priv = container_of(
+		del_work,
+		struct ca8210_priv,
+		async_tx_timeout_work
+	);
+	unsigned long flags;
+
+	dev_err(&priv->spi->dev, "data confirm timed out\n");
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	priv->async_tx_pending = false;
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	ieee802154_wake_queue(priv->hw);
+}
+
+/**
+ * ca8210_start() - Starts the network driver
+ * @hw:  ieee802154_hw of ca8210 being started
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_start(struct ieee802154_hw *hw)
+{
+	int status;
+	u8 rx_on_when_idle;
+	struct ca8210_priv *priv = hw->priv;
+
+	priv->async_tx_workqueue = alloc_ordered_workqueue(
+		"ca8210 tx worker",
+		0
+	);
+	if (!priv->async_tx_workqueue) {
+		dev_crit(&priv->spi->dev, "alloc_ordered_workqueue failed\n");
+		return -ENOMEM;
+	}
+	INIT_DELAYED_WORK(
+		&priv->async_tx_timeout_work,
+		ca8210_async_tx_timeout_worker
+	);
+
+	priv->last_dsn = -1;
+	/* Turn receiver on when idle for now just to test rx */
+	rx_on_when_idle = 1;
+	status = mlme_set_request_sync(
+		MAC_RX_ON_WHEN_IDLE,
+		0,
+		1,
+		&rx_on_when_idle,
+		priv->spi
+	);
+	if (status) {
+		dev_crit(
+			&priv->spi->dev,
+			"Setting rx_on_when_idle failed, status = %d\n",
+			status
+		);
+		return link_to_linux_err(status);
+	}
+
+	return 0;
+}
+
+/**
+ * ca8210_stop() - Stops the network driver
+ * @hw:  ieee802154_hw of ca8210 being stopped
+ *
+ * Return: 0 or linux error code
+ */
+static void ca8210_stop(struct ieee802154_hw *hw)
+{
+	struct ca8210_priv *priv = hw->priv;
+
+	flush_workqueue(priv->async_tx_workqueue);
+	destroy_workqueue(priv->async_tx_workqueue);
+}
+
+/**
+ * ca8210_xmit_async() - Asynchronously transmits a given socket buffer using
+ *                       the ca8210
+ * @hw:   ieee802154_hw of ca8210 to transmit from
+ * @skb:  Socket buffer to transmit
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_xmit_async(struct ieee802154_hw *hw, struct sk_buff *skb)
+{
+	struct ca8210_priv *priv = hw->priv;
+	int status;
+
+	dev_dbg(&priv->spi->dev, "calling ca8210_xmit_async()\n");
+
+	priv->tx_skb = skb;
+	priv->async_tx_pending = true;
+	status = ca8210_skb_tx(skb, priv->nextmsduhandle, priv);
+	queue_delayed_work(
+		priv->async_tx_workqueue,
+		&priv->async_tx_timeout_work,
+		msecs_to_jiffies(CA8210_DATA_CNF_TIMEOUT)
+	);
+	return status;
+}
+
+/**
+ * ca8210_get_ed() - Returns the measured energy on the current channel at this
+ *                   instant in time
+ * @hw:     ieee802154_hw of target ca8210
+ * @level:  Measured Energy Detect level
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_get_ed(struct ieee802154_hw *hw, u8 *level)
+{
+	u8 lenvar;
+	struct ca8210_priv *priv = hw->priv;
+
+	return link_to_linux_err(
+		hwme_get_request_sync(HWME_EDVALUE, &lenvar, level, priv->spi)
+	);
+}
+
+/**
+ * ca8210_set_channel() - Sets the current operating 802.15.4 channel of the
+ *                        ca8210
+ * @hw:       ieee802154_hw of target ca8210
+ * @page:     Channel page to set
+ * @channel:  Channel number to set
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_set_channel(
+	struct ieee802154_hw  *hw,
+	u8                     page,
+	u8                     channel
+)
+{
+	u8 status;
+	struct ca8210_priv *priv = hw->priv;
+
+	status = mlme_set_request_sync(
+		PHY_CURRENT_CHANNEL,
+		0,
+		1,
+		&channel,
+		priv->spi
+	);
+	if (status) {
+		dev_err(
+			&priv->spi->dev,
+			"error setting channel, MLME-SET.confirm status = %d\n",
+			status
+		);
+	}
+	return link_to_linux_err(status);
+}
+
+/**
+ * ca8210_set_hw_addr_filt() - Sets the address filtering parameters of the
+ *                             ca8210
+ * @hw:       ieee802154_hw of target ca8210
+ * @filt:     Filtering parameters
+ * @changed:  Bitmap representing which parameters to change
+ *
+ * Effectively just sets the actual addressing information identifying this node
+ * as all filtering is performed by the ca8210 as detailed in the IEEE 802.15.4
+ * 2006 specification.
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_set_hw_addr_filt(
+	struct ieee802154_hw            *hw,
+	struct ieee802154_hw_addr_filt  *filt,
+	unsigned long                    changed
+)
+{
+	u8 status = 0;
+	struct ca8210_priv *priv = hw->priv;
+
+	if (changed & IEEE802154_AFILT_PANID_CHANGED) {
+		status = mlme_set_request_sync(
+			MAC_PAN_ID,
+			0,
+			2,
+			&filt->pan_id, priv->spi
+		);
+		if (status) {
+			dev_err(
+				&priv->spi->dev,
+				"error setting pan id, MLME-SET.confirm status = %d",
+				status
+			);
+			return link_to_linux_err(status);
+		}
+	}
+	if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
+		status = mlme_set_request_sync(
+			MAC_SHORT_ADDRESS,
+			0,
+			2,
+			&filt->short_addr, priv->spi
+		);
+		if (status) {
+			dev_err(
+				&priv->spi->dev,
+				"error setting short address, MLME-SET.confirm status = %d",
+				status
+			);
+			return link_to_linux_err(status);
+		}
+	}
+	if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
+		status = mlme_set_request_sync(
+			NS_IEEE_ADDRESS,
+			0,
+			8,
+			&filt->ieee_addr,
+			priv->spi
+		);
+		if (status) {
+			dev_err(
+				&priv->spi->dev,
+				"error setting ieee address, MLME-SET.confirm status = %d",
+				status
+			);
+			return link_to_linux_err(status);
+		}
+	}
+	/* TODO: Should use MLME_START to set coord bit? */
+	return 0;
+}
+
+/**
+ * ca8210_set_tx_power() - Sets the transmit power of the ca8210
+ * @hw:   ieee802154_hw of target ca8210
+ * @mbm:  Transmit power in mBm (dBm*100)
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_set_tx_power(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct ca8210_priv *priv = hw->priv;
+
+	mbm /= 100;
+	return link_to_linux_err(
+		mlme_set_request_sync(PHY_TRANSMIT_POWER, 0, 1, &mbm, priv->spi)
+	);
+}
+
+/**
+ * ca8210_set_cca_mode() - Sets the clear channel assessment mode of the ca8210
+ * @hw:   ieee802154_hw of target ca8210
+ * @cca:  CCA mode to set
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_set_cca_mode(
+	struct ieee802154_hw       *hw,
+	const struct wpan_phy_cca  *cca
+)
+{
+	u8 status;
+	u8 cca_mode;
+	struct ca8210_priv *priv = hw->priv;
+
+	cca_mode = cca->mode & 3;
+	if (cca_mode == 3 && cca->opt == NL802154_CCA_OPT_ENERGY_CARRIER_OR) {
+		/* cca_mode 0 == CS OR ED, 3 == CS AND ED */
+		cca_mode = 0;
+	}
+	status = mlme_set_request_sync(
+		PHY_CCA_MODE,
+		0,
+		1,
+		&cca_mode,
+		priv->spi
+	);
+	if (status) {
+		dev_err(
+			&priv->spi->dev,
+			"error setting cca mode, MLME-SET.confirm status = %d",
+			status
+		);
+	}
+	return link_to_linux_err(status);
+}
+
+/**
+ * ca8210_set_cca_ed_level() - Sets the CCA ED level of the ca8210
+ * @hw:     ieee802154_hw of target ca8210
+ * @level:  ED level to set (in mbm)
+ *
+ * Sets the minimum threshold of measured energy above which the ca8210 will
+ * back off and retry a transmission.
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_set_cca_ed_level(struct ieee802154_hw *hw, s32 level)
+{
+	u8 status;
+	u8 ed_threshold = (level / 100) * 2 + 256;
+	struct ca8210_priv *priv = hw->priv;
+
+	status = hwme_set_request_sync(
+		HWME_EDTHRESHOLD,
+		1,
+		&ed_threshold,
+		priv->spi
+	);
+	if (status) {
+		dev_err(
+			&priv->spi->dev,
+			"error setting ed threshold, HWME-SET.confirm status = %d",
+			status
+		);
+	}
+	return link_to_linux_err(status);
+}
+
+/**
+ * ca8210_set_csma_params() - Sets the CSMA parameters of the ca8210
+ * @hw:       ieee802154_hw of target ca8210
+ * @min_be:   Minimum backoff exponent when backing off a transmission
+ * @max_be:   Maximum backoff exponent when backing off a transmission
+ * @retries:  Number of times to retry after backing off
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_set_csma_params(
+	struct ieee802154_hw  *hw,
+	u8                     min_be,
+	u8                     max_be,
+	u8                     retries
+)
+{
+	u8 status;
+	struct ca8210_priv *priv = hw->priv;
+
+	status = mlme_set_request_sync(MAC_MIN_BE, 0, 1, &min_be, priv->spi);
+	if (status) {
+		dev_err(
+			&priv->spi->dev,
+			"error setting min be, MLME-SET.confirm status = %d",
+			status
+		);
+		return link_to_linux_err(status);
+	}
+	status = mlme_set_request_sync(MAC_MAX_BE, 0, 1, &max_be, priv->spi);
+	if (status) {
+		dev_err(
+			&priv->spi->dev,
+			"error setting max be, MLME-SET.confirm status = %d",
+			status
+		);
+		return link_to_linux_err(status);
+	}
+	status = mlme_set_request_sync(
+		MAC_MAX_CSMA_BACKOFFS,
+		0,
+		1,
+		&retries,
+		priv->spi
+	);
+	if (status) {
+		dev_err(
+			&priv->spi->dev,
+			"error setting max csma backoffs, MLME-SET.confirm status = %d",
+			status
+		);
+	}
+	return link_to_linux_err(status);
+}
+
+/**
+ * ca8210_set_frame_retries() - Sets the maximum frame retries of the ca8210
+ * @hw:       ieee802154_hw of target ca8210
+ * @retries:  Number of retries
+ *
+ * Sets the number of times to retry a transmission if no acknowledgment was
+ * was received from the other end when one was requested.
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_set_frame_retries(struct ieee802154_hw *hw, s8 retries)
+{
+	u8 status;
+	struct ca8210_priv *priv = hw->priv;
+
+	status = mlme_set_request_sync(
+		MAC_MAX_FRAME_RETRIES,
+		0,
+		1,
+		&retries,
+		priv->spi
+	);
+	if (status) {
+		dev_err(
+			&priv->spi->dev,
+			"error setting panid, MLME-SET.confirm status = %d",
+			status
+		);
+	}
+	return link_to_linux_err(status);
+}
+
+static const struct ieee802154_ops ca8210_phy_ops = {
+	.start = ca8210_start,
+	.stop = ca8210_stop,
+	.xmit_async = ca8210_xmit_async,
+	.ed = ca8210_get_ed,
+	.set_channel = ca8210_set_channel,
+	.set_hw_addr_filt = ca8210_set_hw_addr_filt,
+	.set_txpower = ca8210_set_tx_power,
+	.set_cca_mode = ca8210_set_cca_mode,
+	.set_cca_ed_level = ca8210_set_cca_ed_level,
+	.set_csma_params = ca8210_set_csma_params,
+	.set_frame_retries = ca8210_set_frame_retries
+};
+
+/* Test/EVBME Interface */
+
+/**
+ * ca8210_test_int_open() - Opens the test interface to the userspace
+ * @inodp:  inode representation of file interface
+ * @filp:   file interface
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_test_int_open(struct inode *inodp, struct file *filp)
+{
+	struct ca8210_priv *priv = inodp->i_private;
+
+	filp->private_data = priv;
+	return 0;
+}
+
+/**
+ * ca8210_test_check_upstream() - Checks a command received from the upstream
+ *                                testing interface for required action
+ * @buf:        Buffer containing command to check
+ * @device_ref: Nondescript pointer to target device
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_test_check_upstream(u8 *buf, void *device_ref)
+{
+	int ret;
+	u8 response[CA8210_SPI_BUF_SIZE];
+
+	if (buf[0] == SPI_MLME_SET_REQUEST) {
+		ret = tdme_checkpibattribute(buf[2], buf[4], buf + 5);
+		if (ret) {
+			response[0]  = SPI_MLME_SET_CONFIRM;
+			response[1] = 3;
+			response[2] = MAC_INVALID_PARAMETER;
+			response[3] = buf[2];
+			response[4] = buf[3];
+			if (cascoda_api_upstream)
+				cascoda_api_upstream(response, 5, device_ref);
+			return ret;
+		}
+	}
+	if (buf[0] == SPI_MLME_ASSOCIATE_REQUEST) {
+		return tdme_channelinit(buf[2], device_ref);
+	} else if (buf[0] == SPI_MLME_START_REQUEST) {
+		return tdme_channelinit(buf[4], device_ref);
+	} else if (
+		(buf[0] == SPI_MLME_SET_REQUEST) &&
+		(buf[2] == PHY_CURRENT_CHANNEL)
+	) {
+		return tdme_channelinit(buf[5], device_ref);
+	} else if (
+		(buf[0] == SPI_TDME_SET_REQUEST) &&
+		(buf[2] == TDME_CHANNEL)
+	) {
+		return tdme_channelinit(buf[4], device_ref);
+	} else if (
+		(CA8210_MAC_WORKAROUNDS) &&
+		(buf[0] == SPI_MLME_RESET_REQUEST) &&
+		(buf[2] == 1)
+	) {
+		/* reset COORD Bit for Channel Filtering as Coordinator */
+		return tdme_setsfr_request_sync(
+			0,
+			CA8210_SFR_MACCON,
+			0,
+			device_ref
+		);
+	}
+	return 0;
+} /* End of EVBMECheckSerialCommand() */
+
+/**
+ * ca8210_test_int_user_write() - Called by a process in userspace to send a
+ *                                message to the ca8210 drivers
+ * @filp:    file interface
+ * @in_buf:  Buffer containing message to write
+ * @len:     length of message
+ * @off:     file offset
+ *
+ * Return: 0 or linux error code
+ */
+static ssize_t ca8210_test_int_user_write(
+	struct file        *filp,
+	const char __user  *in_buf,
+	size_t              len,
+	loff_t             *off
+)
+{
+	int ret;
+	struct ca8210_priv *priv = filp->private_data;
+	u8 command[CA8210_SPI_BUF_SIZE];
+
+	if (len > CA8210_SPI_BUF_SIZE) {
+		dev_warn(
+			&priv->spi->dev,
+			"userspace requested erroneously long write (%zu)\n",
+			len
+		);
+		return -EMSGSIZE;
+	}
+
+	ret = copy_from_user(command, in_buf, len);
+	if (ret) {
+		dev_err(
+			&priv->spi->dev,
+			"%d bytes could not be copied from userspace\n",
+			ret
+		);
+		return -EIO;
+	}
+
+	ret = ca8210_test_check_upstream(command, priv->spi);
+	if (ret == 0) {
+		ret = ca8210_spi_exchange(
+			command,
+			command[1] + 2,
+			NULL,
+			priv->spi
+		);
+		if (ret < 0) {
+			/* effectively 0 bytes were written successfully */
+			dev_err(
+				&priv->spi->dev,
+				"spi exchange failed\n"
+			);
+			return ret;
+		}
+		if (command[0] & SPI_SYN)
+			priv->sync_down++;
+	}
+
+	return len;
+}
+
+/**
+ * ca8210_test_int_user_read() - Called by a process in userspace to read a
+ *                               message from the ca8210 drivers
+ * @filp:  file interface
+ * @buf:   Buffer to write message to
+ * @len:   length of message to read (ignored)
+ * @offp:  file offset
+ *
+ * If the O_NONBLOCK flag was set when opening the file then this function will
+ * not block, i.e. it will return if the fifo is empty. Otherwise the function
+ * will block, i.e. wait until new data arrives.
+ *
+ * Return: number of bytes read
+ */
+static ssize_t ca8210_test_int_user_read(
+	struct file  *filp,
+	char __user  *buf,
+	size_t        len,
+	loff_t       *offp
+)
+{
+	int i, cmdlen;
+	struct ca8210_priv *priv = filp->private_data;
+	unsigned char *fifo_buffer;
+	unsigned long bytes_not_copied;
+
+	if (filp->f_flags & O_NONBLOCK) {
+		/* Non-blocking mode */
+		if (kfifo_is_empty(&priv->test.up_fifo))
+			return 0;
+	} else {
+		/* Blocking mode */
+		wait_event_interruptible(
+			priv->test.readq,
+			!kfifo_is_empty(&priv->test.up_fifo)
+		);
+	}
+
+	if (kfifo_out(&priv->test.up_fifo, &fifo_buffer, 4) != 4) {
+		dev_err(
+			&priv->spi->dev,
+			"test_interface: Wrong number of elements popped from upstream fifo\n"
+		);
+		return 0;
+	}
+	cmdlen = fifo_buffer[1];
+	bytes_not_copied = cmdlen + 2;
+
+	bytes_not_copied = copy_to_user(buf, fifo_buffer, bytes_not_copied);
+	if (bytes_not_copied > 0) {
+		dev_err(
+			&priv->spi->dev,
+			"%lu bytes could not be copied to user space!\n",
+			bytes_not_copied
+		);
+	}
+
+	dev_dbg(&priv->spi->dev, "test_interface: Cmd len = %d\n", cmdlen);
+
+	dev_dbg(&priv->spi->dev, "test_interface: Read\n");
+	for (i = 0; i < cmdlen + 2; i++)
+		dev_dbg(&priv->spi->dev, "%#03x\n", fifo_buffer[i]);
+
+	kfree(fifo_buffer);
+
+	return cmdlen + 2;
+}
+
+/**
+ * ca8210_test_int_ioctl() - Called by a process in userspace to enact an
+ *                           arbitrary action
+ * @filp:        file interface
+ * @ioctl_num:   which action to enact
+ * @ioctl_param: arbitrary parameter for the action
+ *
+ * Return: status
+ */
+static long ca8210_test_int_ioctl(
+	struct file *filp,
+	unsigned int ioctl_num,
+	unsigned long ioctl_param
+)
+{
+	struct ca8210_priv *priv = filp->private_data;
+
+	switch (ioctl_num) {
+	case CA8210_IOCTL_HARD_RESET:
+		ca8210_reset_send(priv->spi, ioctl_param);
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+/**
+ * ca8210_test_int_poll() - Called by a process in userspace to determine which
+ *                          actions are currently possible for the file
+ * @filp:   file interface
+ * @ptable: poll table
+ *
+ * Return: set of poll return flags
+ */
+static unsigned int ca8210_test_int_poll(
+	struct file *filp,
+	struct poll_table_struct *ptable
+)
+{
+	unsigned int return_flags = 0;
+	struct ca8210_priv *priv = filp->private_data;
+
+	poll_wait(filp, &priv->test.readq, ptable);
+	if (!kfifo_is_empty(&priv->test.up_fifo))
+		return_flags |= (POLLIN | POLLRDNORM);
+	if (wait_event_interruptible(
+		priv->test.readq,
+		!kfifo_is_empty(&priv->test.up_fifo))) {
+		return POLLERR;
+	}
+	return return_flags;
+}
+
+static const struct file_operations test_int_fops = {
+	.read =           ca8210_test_int_user_read,
+	.write =          ca8210_test_int_user_write,
+	.open =           ca8210_test_int_open,
+	.release =        NULL,
+	.unlocked_ioctl = ca8210_test_int_ioctl,
+	.poll =           ca8210_test_int_poll
+};
+
+/* Init/Deinit */
+
+/**
+ * ca8210_get_platform_data() - Populate a ca8210_platform_data object
+ * @spi_device:  Pointer to ca8210 spi device object to get data for
+ * @pdata:       Pointer to ca8210_platform_data object to populate
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_get_platform_data(
+	struct spi_device *spi_device,
+	struct ca8210_platform_data *pdata
+)
+{
+	int ret = 0;
+
+	if (!spi_device->dev.of_node)
+		return -EINVAL;
+
+	pdata->extclockenable = of_property_read_bool(
+		spi_device->dev.of_node,
+		"extclock-enable"
+	);
+	if (pdata->extclockenable) {
+		ret = of_property_read_u32(
+			spi_device->dev.of_node,
+			"extclock-freq",
+			&pdata->extclockfreq
+		);
+		if (ret < 0)
+			return ret;
+
+		ret = of_property_read_u32(
+			spi_device->dev.of_node,
+			"extclock-gpio",
+			&pdata->extclockgpio
+		);
+	}
+
+	return ret;
+}
+
+/**
+ * ca8210_config_extern_clk() - Configure the external clock provided by the
+ *                              ca8210
+ * @pdata:  Pointer to ca8210_platform_data containing clock parameters
+ * @spi:    Pointer to target ca8210 spi device
+ * @on:	    True to turn the clock on, false to turn off
+ *
+ * The external clock is configured with a frequency and output pin taken from
+ * the platform data.
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_config_extern_clk(
+	struct ca8210_platform_data *pdata,
+	struct spi_device *spi,
+	bool on
+)
+{
+	u8 clkparam[2];
+
+	if (on) {
+		dev_info(&spi->dev, "Switching external clock on\n");
+		switch (pdata->extclockfreq) {
+		case SIXTEEN_MHZ:
+			clkparam[0] = 1;
+			break;
+		case EIGHT_MHZ:
+			clkparam[0] = 2;
+			break;
+		case FOUR_MHZ:
+			clkparam[0] = 3;
+			break;
+		case TWO_MHZ:
+			clkparam[0] = 4;
+			break;
+		case ONE_MHZ:
+			clkparam[0] = 5;
+			break;
+		default:
+			dev_crit(&spi->dev, "Invalid extclock-freq\n");
+			return -EINVAL;
+		}
+		clkparam[1] = pdata->extclockgpio;
+	} else {
+		dev_info(&spi->dev, "Switching external clock off\n");
+		clkparam[0] = 0; /* off */
+		clkparam[1] = 0;
+	}
+	return link_to_linux_err(
+		hwme_set_request_sync(HWME_SYSCLKOUT, 2, clkparam, spi)
+	);
+}
+
+/**
+ * ca8210_register_ext_clock() - Register ca8210's external clock with kernel
+ * @spi:  Pointer to target ca8210 spi device
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_register_ext_clock(struct spi_device *spi)
+{
+	struct device_node *np = spi->dev.of_node;
+	struct ca8210_priv *priv = spi_get_drvdata(spi);
+	struct ca8210_platform_data *pdata = spi->dev.platform_data;
+	int ret = 0;
+
+	if (!np)
+		return -EFAULT;
+
+	priv->clk = clk_register_fixed_rate(
+		&spi->dev,
+		np->name,
+		NULL,
+		0,
+		pdata->extclockfreq
+	);
+
+	if (IS_ERR(priv->clk)) {
+		dev_crit(&spi->dev, "Failed to register external clk\n");
+		return PTR_ERR(priv->clk);
+	}
+	ret = of_clk_add_provider(np, of_clk_src_simple_get, priv->clk);
+	if (ret) {
+		clk_unregister(priv->clk);
+		dev_crit(
+			&spi->dev,
+			"Failed to register external clock as clock provider\n"
+		);
+	} else {
+		dev_info(&spi->dev, "External clock set as clock provider\n");
+	}
+
+	return ret;
+}
+
+/**
+ * ca8210_unregister_ext_clock() - Unregister ca8210's external clock with
+ *                                 kernel
+ * @spi:  Pointer to target ca8210 spi device
+ */
+static void ca8210_unregister_ext_clock(struct spi_device *spi)
+{
+	struct ca8210_priv *priv = spi_get_drvdata(spi);
+
+	if (!priv->clk)
+		return
+
+	of_clk_del_provider(spi->dev.of_node);
+	clk_unregister(priv->clk);
+	dev_info(&spi->dev, "External clock unregistered\n");
+}
+
+/**
+ * ca8210_reset_init() - Initialise the reset input to the ca8210
+ * @spi:  Pointer to target ca8210 spi device
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_reset_init(struct spi_device *spi)
+{
+	int ret;
+	struct ca8210_platform_data *pdata = spi->dev.platform_data;
+
+	pdata->gpio_reset = of_get_named_gpio(
+		spi->dev.of_node,
+		"reset-gpio",
+		0
+	);
+
+	ret = gpio_direction_output(pdata->gpio_reset, 1);
+	if (ret < 0) {
+		dev_crit(
+			&spi->dev,
+			"Reset GPIO %d did not set to output mode\n",
+			pdata->gpio_reset
+		);
+	}
+
+	return ret;
+}
+
+/**
+ * ca8210_interrupt_init() - Initialise the irq output from the ca8210
+ * @spi:  Pointer to target ca8210 spi device
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_interrupt_init(struct spi_device *spi)
+{
+	int ret;
+	struct ca8210_platform_data *pdata = spi->dev.platform_data;
+
+	pdata->gpio_irq = of_get_named_gpio(
+		spi->dev.of_node,
+		"irq-gpio",
+		0
+	);
+
+	pdata->irq_id = gpio_to_irq(pdata->gpio_irq);
+	if (pdata->irq_id < 0) {
+		dev_crit(
+			&spi->dev,
+			"Could not get irq for gpio pin %d\n",
+			pdata->gpio_irq
+		);
+		gpio_free(pdata->gpio_irq);
+		return pdata->irq_id;
+	}
+
+	ret = request_irq(
+		pdata->irq_id,
+		ca8210_interrupt_handler,
+		IRQF_TRIGGER_FALLING,
+		"ca8210-irq",
+		spi_get_drvdata(spi)
+	);
+	if (ret) {
+		dev_crit(&spi->dev, "request_irq %d failed\n", pdata->irq_id);
+		gpio_unexport(pdata->gpio_irq);
+		gpio_free(pdata->gpio_irq);
+	}
+
+	return ret;
+}
+
+/**
+ * ca8210_dev_com_init() - Initialise the spi communication component
+ * @priv:  Pointer to private data structure
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_dev_com_init(struct ca8210_priv *priv)
+{
+	priv->mlme_workqueue = alloc_ordered_workqueue(
+		"MLME work queue",
+		WQ_UNBOUND
+	);
+	if (!priv->mlme_workqueue) {
+		dev_crit(&priv->spi->dev, "alloc of mlme_workqueue failed!\n");
+		return -ENOMEM;
+	}
+
+	priv->irq_workqueue = alloc_ordered_workqueue(
+		"ca8210 irq worker",
+		WQ_UNBOUND
+	);
+	if (!priv->irq_workqueue) {
+		dev_crit(&priv->spi->dev, "alloc of irq_workqueue failed!\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+/**
+ * ca8210_dev_com_clear() - Deinitialise the spi communication component
+ * @priv:  Pointer to private data structure
+ */
+static void ca8210_dev_com_clear(struct ca8210_priv *priv)
+{
+	flush_workqueue(priv->mlme_workqueue);
+	destroy_workqueue(priv->mlme_workqueue);
+	flush_workqueue(priv->irq_workqueue);
+	destroy_workqueue(priv->irq_workqueue);
+}
+
+#define CA8210_MAX_TX_POWERS (9)
+static const s32 ca8210_tx_powers[CA8210_MAX_TX_POWERS] = {
+	800, 700, 600, 500, 400, 300, 200, 100, 0
+};
+
+#define CA8210_MAX_ED_LEVELS (21)
+static const s32 ca8210_ed_levels[CA8210_MAX_ED_LEVELS] = {
+	-10300, -10250, -10200, -10150, -10100, -10050, -10000, -9950, -9900,
+	-9850, -9800, -9750, -9700, -9650, -9600, -9550, -9500, -9450, -9400,
+	-9350, -9300
+};
+
+/**
+ * ca8210_hw_setup() - Populate the ieee802154_hw phy attributes with the
+ *                     ca8210's defaults
+ * @ca8210_hw:  Pointer to ieee802154_hw to populate
+ */
+static void ca8210_hw_setup(struct ieee802154_hw *ca8210_hw)
+{
+	/* Support channels 11-26 */
+	ca8210_hw->phy->supported.channels[0] = CA8210_VALID_CHANNELS;
+	ca8210_hw->phy->supported.tx_powers_size = CA8210_MAX_TX_POWERS;
+	ca8210_hw->phy->supported.tx_powers = ca8210_tx_powers;
+	ca8210_hw->phy->supported.cca_ed_levels_size = CA8210_MAX_ED_LEVELS;
+	ca8210_hw->phy->supported.cca_ed_levels = ca8210_ed_levels;
+	ca8210_hw->phy->current_channel = 18;
+	ca8210_hw->phy->current_page = 0;
+	ca8210_hw->phy->transmit_power = 800;
+	ca8210_hw->phy->cca.mode = NL802154_CCA_ENERGY_CARRIER;
+	ca8210_hw->phy->cca.opt = NL802154_CCA_OPT_ENERGY_CARRIER_AND;
+	ca8210_hw->phy->cca_ed_level = -9800;
+	ca8210_hw->phy->symbol_duration = 16;
+	ca8210_hw->phy->lifs_period = 40;
+	ca8210_hw->phy->sifs_period = 12;
+	ca8210_hw->flags =
+		IEEE802154_HW_AFILT |
+		IEEE802154_HW_OMIT_CKSUM |
+		IEEE802154_HW_FRAME_RETRIES |
+		IEEE802154_HW_CSMA_PARAMS;
+	ca8210_hw->phy->flags =
+		WPAN_PHY_FLAG_TXPOWER |
+		WPAN_PHY_FLAG_CCA_ED_LEVEL |
+		WPAN_PHY_FLAG_CCA_MODE;
+}
+
+/**
+ * ca8210_test_interface_init() - Initialise the test file interface
+ * @priv:  Pointer to private data structure
+ *
+ * Provided as an alternative to the standard linux network interface, the test
+ * interface exposes a file in the filesystem (ca8210_test) that allows
+ * 802.15.4 SAP Commands and Cascoda EVBME commands to be sent directly to
+ * the stack.
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_test_interface_init(struct ca8210_priv *priv)
+{
+	struct ca8210_test *test = &priv->test;
+	char node_name[32];
+
+	snprintf(
+		node_name,
+		sizeof(node_name),
+		"ca8210@%d_%d",
+		priv->spi->master->bus_num,
+		priv->spi->chip_select
+	);
+
+	test->ca8210_dfs_spi_int = debugfs_create_file(
+		node_name,
+		0600, /* S_IRUSR | S_IWUSR */
+		NULL,
+		priv,
+		&test_int_fops
+	);
+	if (IS_ERR(test->ca8210_dfs_spi_int)) {
+		dev_err(
+			&priv->spi->dev,
+			"Error %ld when creating debugfs node\n",
+			PTR_ERR(test->ca8210_dfs_spi_int)
+		);
+		return PTR_ERR(test->ca8210_dfs_spi_int);
+	}
+	debugfs_create_symlink("ca8210", NULL, node_name);
+	init_waitqueue_head(&test->readq);
+	return kfifo_alloc(
+		&test->up_fifo,
+		CA8210_TEST_INT_FIFO_SIZE,
+		GFP_KERNEL
+	);
+}
+
+/**
+ * ca8210_test_interface_clear() - Deinitialise the test file interface
+ * @priv:  Pointer to private data structure
+ */
+static void ca8210_test_interface_clear(struct ca8210_priv *priv)
+{
+	struct ca8210_test *test = &priv->test;
+
+	if (!IS_ERR(test->ca8210_dfs_spi_int))
+		debugfs_remove(test->ca8210_dfs_spi_int);
+	kfifo_free(&test->up_fifo);
+	dev_info(&priv->spi->dev, "Test interface removed\n");
+}
+
+/**
+ * ca8210_remove() - Shut down a ca8210 upon being disconnected
+ * @priv:  Pointer to private data structure
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_remove(struct spi_device *spi_device)
+{
+	struct ca8210_priv *priv;
+	struct ca8210_platform_data *pdata;
+
+	dev_info(&spi_device->dev, "Removing ca8210\n");
+
+	pdata = spi_device->dev.platform_data;
+	if (pdata) {
+		if (pdata->extclockenable) {
+			ca8210_unregister_ext_clock(spi_device);
+			ca8210_config_extern_clk(pdata, spi_device, 0);
+		}
+		free_irq(pdata->irq_id, spi_device->dev.driver_data);
+		kfree(pdata);
+		spi_device->dev.platform_data = NULL;
+	}
+	/* get spi_device private data */
+	priv = spi_get_drvdata(spi_device);
+	if (priv) {
+		dev_info(
+			&spi_device->dev,
+			"sync_down = %d, sync_up = %d\n",
+			priv->sync_down,
+			priv->sync_up
+		);
+		ca8210_dev_com_clear(spi_device->dev.driver_data);
+		if (priv->hw) {
+			if (priv->hw_registered)
+				ieee802154_unregister_hw(priv->hw);
+			ieee802154_free_hw(priv->hw);
+			priv->hw = NULL;
+			dev_info(
+				&spi_device->dev,
+				"Unregistered & freed ieee802154_hw.\n"
+			);
+		}
+		if (IS_ENABLED(CONFIG_IEEE802154_CA8210_DEBUGFS))
+			ca8210_test_interface_clear(priv);
+	}
+
+	return 0;
+}
+
+/**
+ * ca8210_probe() - Set up a connected ca8210 upon being detected by the system
+ * @priv:  Pointer to private data structure
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_probe(struct spi_device *spi_device)
+{
+	struct ca8210_priv *priv;
+	struct ieee802154_hw *hw;
+	struct ca8210_platform_data *pdata;
+	int ret;
+
+	dev_info(&spi_device->dev, "Inserting ca8210\n");
+
+	/* allocate ieee802154_hw and private data */
+	hw = ieee802154_alloc_hw(sizeof(struct ca8210_priv), &ca8210_phy_ops);
+	if (!hw) {
+		dev_crit(&spi_device->dev, "ieee802154_alloc_hw failed\n");
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	priv = hw->priv;
+	priv->hw = hw;
+	priv->spi = spi_device;
+	hw->parent = &spi_device->dev;
+	spin_lock_init(&priv->lock);
+	priv->async_tx_pending = false;
+	priv->sync_command_pending = false;
+	priv->hw_registered = false;
+	priv->sync_up = 0;
+	priv->sync_down = 0;
+	mutex_init(&priv->sync_command_mutex);
+	init_completion(&priv->ca8210_is_awake);
+	init_completion(&priv->spi_transfer_complete);
+	init_completion(&priv->sync_exchange_complete);
+	spi_set_drvdata(priv->spi, priv);
+
+	if (IS_ENABLED(CONFIG_IEEE802154_CA8210_DEBUGFS))
+		ca8210_test_interface_init(priv);
+	ca8210_hw_setup(hw);
+	ieee802154_random_extended_addr(&hw->phy->perm_extended_addr);
+
+	pdata = kmalloc(sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_crit(
+			&spi_device->dev,
+			"Could not allocate platform data\n"
+		);
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	ret = ca8210_get_platform_data(priv->spi, pdata);
+	if (ret) {
+		dev_crit(&spi_device->dev, "ca8210_get_platform_data failed\n");
+		goto error;
+	}
+	priv->spi->dev.platform_data = pdata;
+
+	ret = ca8210_dev_com_init(priv);
+	if (ret) {
+		dev_crit(&spi_device->dev, "ca8210_dev_com_init failed\n");
+		goto error;
+	}
+	ret = ca8210_reset_init(priv->spi);
+	if (ret) {
+		dev_crit(&spi_device->dev, "ca8210_reset_init failed\n");
+		goto error;
+	}
+
+	ret = ca8210_interrupt_init(priv->spi);
+	if (ret) {
+		dev_crit(&spi_device->dev, "ca8210_interrupt_init failed\n");
+		goto error;
+	}
+
+	msleep(100);
+
+	ca8210_reset_send(priv->spi, 1);
+
+	ret = tdme_chipinit(priv->spi);
+	if (ret) {
+		dev_crit(&spi_device->dev, "tdme_chipinit failed\n");
+		goto error;
+	}
+
+	if (pdata->extclockenable) {
+		ret = ca8210_config_extern_clk(pdata, priv->spi, 1);
+		if (ret) {
+			dev_crit(
+				&spi_device->dev,
+				"ca8210_config_extern_clk failed\n"
+			);
+			goto error;
+		}
+		ret = ca8210_register_ext_clock(priv->spi);
+		if (ret) {
+			dev_crit(
+				&spi_device->dev,
+				"ca8210_register_ext_clock failed\n"
+			);
+			goto error;
+		}
+	}
+
+	ret = ieee802154_register_hw(hw);
+	if (ret) {
+		dev_crit(&spi_device->dev, "ieee802154_register_hw failed\n");
+		goto error;
+	}
+	priv->hw_registered = true;
+
+	return 0;
+error:
+	msleep(100); /* wait for pending spi transfers to complete */
+	ca8210_remove(spi_device);
+	return link_to_linux_err(ret);
+}
+
+static const struct of_device_id ca8210_of_ids[] = {
+	{.compatible = "cascoda,ca8210", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ca8210_of_ids);
+
+static struct spi_driver ca8210_spi_driver = {
+	.driver = {
+		.name =                 DRIVER_NAME,
+		.owner =                THIS_MODULE,
+		.of_match_table =       of_match_ptr(ca8210_of_ids),
+	},
+	.probe  =                       ca8210_probe,
+	.remove =                       ca8210_remove
+};
+
+static int __init ca8210_init(void)
+{
+	pr_info("Starting module ca8210\n");
+
+	if (IS_ENABLED(CONFIG_IEEE802154_CA8210_DEBUGFS))
+		cascoda_api_upstream = ca8210_test_int_driver_write;
+	else
+		cascoda_api_upstream = NULL;
+
+	spi_register_driver(&ca8210_spi_driver);
+	pr_info("ca8210 module started\n");
+	return 0;
+}
+module_init(ca8210_init);
+
+static void __exit ca8210_exit(void)
+{
+	pr_info("Stopping module ca8210\n");
+	spi_unregister_driver(&ca8210_spi_driver);
+	pr_info("ca8210 module stopped\n");
+}
+module_exit(ca8210_exit);
+
+MODULE_AUTHOR("Harry Morris <h.morris@cascoda.com>");
+MODULE_DESCRIPTION("CA-8210 SoftMAC driver");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_VERSION("1.0");
