@@ -223,6 +223,11 @@ struct wpan_phy {
atomic_t hold_txs;
wait_queue_head_t sync_txq;
+ /* Current filtering level on reception.
+ * Only allowed to be changed if phy is not operational.
+ */
+ enum ieee802154_filtering_level filtering;
+
char priv[] __aligned(NETDEV_ALIGN);
};
@@ -374,8 +379,6 @@ struct wpan_dev {
bool lbt;
- bool promiscuous_mode;
-
/* fallback for acknowledgment bit setting */
bool ackreq;
};
@@ -67,7 +67,7 @@ static int ieee802154_resume(struct wpan_phy *wpan_phy)
goto wake_up;
/* restart hardware */
- ret = drv_start(local);
+ ret = drv_start(local, local->phy->filtering, &local->addr_filt);
if (ret)
return ret;
@@ -129,12 +129,81 @@ drv_set_promiscuous_mode(struct ieee802154_local *local, bool on)
return ret;
}
-static inline int drv_start(struct ieee802154_local *local)
+static inline int drv_start(struct ieee802154_local *local,
+ enum ieee802154_filtering_level level,
+ const struct ieee802154_hw_addr_filt *addr_filt)
{
int ret;
might_sleep();
+ /* setup receive mode parameters e.g. address mode */
+ if (local->hw.flags & IEEE802154_HW_AFILT) {
+ ret = drv_set_pan_id(local, addr_filt->pan_id);
+ if (ret < 0)
+ return ret;
+
+ ret = drv_set_short_addr(local, addr_filt->short_addr);
+ if (ret < 0)
+ return ret;
+
+ ret = drv_set_extended_addr(local, addr_filt->ieee_addr);
+ if (ret < 0)
+ return ret;
+ }
+
+ switch (level) {
+ case IEEE802154_FILTERING_NONE:
+ fallthrough;
+ case IEEE802154_FILTERING_1_FCS:
+ fallthrough;
+ case IEEE802154_FILTERING_2_PROMISCUOUS:
+ /* TODO: Requires a different receive mode setup e.g.
+ * at86rf233 hardware.
+ */
+ fallthrough;
+ case IEEE802154_FILTERING_3_SCAN:
+ if (local->hw.flags & IEEE802154_HW_PROMISCUOUS) {
+ ret = drv_set_promiscuous_mode(local, true);
+ if (ret < 0)
+ return ret;
+ } else {
+ return -EOPNOTSUPP;
+ }
+
+ /* In practice other filtering levels can be requested, but as
+ * for now most hardware/drivers only support
+ * IEEE802154_FILTERING_NONE, we fallback to this actual
+ * filtering level in hardware and make our own additional
+ * filtering in mac802154 receive path.
+ *
+ * TODO: Move this logic to the device drivers as hardware may
+ * support more higher level filters. Hardware may also require
+ * a different order how register are set, which could currently
+ * be buggy, so all received parameters need to be moved to the
+ * start() callback and let the driver go into the mode before
+ * it will turn on receive handling.
+ */
+ local->phy->filtering = IEEE802154_FILTERING_NONE;
+ break;
+ case IEEE802154_FILTERING_4_FRAME_FIELDS:
+ /* Do not error out if IEEE802154_HW_PROMISCUOUS because we
+ * expect the hardware to operate at the level
+ * IEEE802154_FILTERING_4_FRAME_FIELDS anyway.
+ */
+ if (local->hw.flags & IEEE802154_HW_PROMISCUOUS) {
+ ret = drv_set_promiscuous_mode(local, false);
+ if (ret < 0)
+ return ret;
+ }
+
+ local->phy->filtering = IEEE802154_FILTERING_4_FRAME_FIELDS;
+ break;
+ default:
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
trace_802154_drv_start(local);
local->started = true;
smp_mb();
@@ -26,6 +26,8 @@ struct ieee802154_local {
struct ieee802154_hw hw;
const struct ieee802154_ops *ops;
+ /* hardware address filter */
+ struct ieee802154_hw_addr_filt addr_filt;
/* ieee802154 phy */
struct wpan_phy *phy;
@@ -82,6 +84,16 @@ struct ieee802154_sub_if_data {
struct ieee802154_local *local;
struct net_device *dev;
+ /* Each interface starts and works in nominal state at a given filtering
+ * level given by iface_default_filtering, which is set once for all at
+ * the interface creation and should not evolve over time. For some MAC
+ * operations however, the filtering level may change temporarily, as
+ * reflected in the required_filtering field. The actual filtering at
+ * the PHY level may be different and is shown in struct wpan_phy.
+ */
+ enum ieee802154_filtering_level iface_default_filtering;
+ enum ieee802154_filtering_level required_filtering;
+
unsigned long state;
char name[IFNAMSIZ];
@@ -147,25 +147,12 @@ static int ieee802154_setup_hw(struct ieee802154_sub_if_data *sdata)
struct wpan_dev *wpan_dev = &sdata->wpan_dev;
int ret;
- if (local->hw.flags & IEEE802154_HW_PROMISCUOUS) {
- ret = drv_set_promiscuous_mode(local,
- wpan_dev->promiscuous_mode);
- if (ret < 0)
- return ret;
- }
+ sdata->required_filtering = sdata->iface_default_filtering;
if (local->hw.flags & IEEE802154_HW_AFILT) {
- ret = drv_set_pan_id(local, wpan_dev->pan_id);
- if (ret < 0)
- return ret;
-
- ret = drv_set_extended_addr(local, wpan_dev->extended_addr);
- if (ret < 0)
- return ret;
-
- ret = drv_set_short_addr(local, wpan_dev->short_addr);
- if (ret < 0)
- return ret;
+ local->addr_filt.pan_id = wpan_dev->pan_id;
+ local->addr_filt.ieee_addr = wpan_dev->extended_addr;
+ local->addr_filt.short_addr = wpan_dev->short_addr;
}
if (local->hw.flags & IEEE802154_HW_LBT) {
@@ -206,7 +193,8 @@ static int mac802154_slave_open(struct net_device *dev)
if (res)
goto err;
- res = drv_start(local);
+ res = drv_start(local, sdata->required_filtering,
+ &local->addr_filt);
if (res)
goto err;
}
@@ -223,15 +211,16 @@ static int mac802154_slave_open(struct net_device *dev)
static int
ieee802154_check_mac_settings(struct ieee802154_local *local,
- struct wpan_dev *wpan_dev,
- struct wpan_dev *nwpan_dev)
+ struct ieee802154_sub_if_data *sdata,
+ struct ieee802154_sub_if_data *nsdata)
{
+ struct wpan_dev *nwpan_dev = &nsdata->wpan_dev;
+ struct wpan_dev *wpan_dev = &sdata->wpan_dev;
+
ASSERT_RTNL();
- if (local->hw.flags & IEEE802154_HW_PROMISCUOUS) {
- if (wpan_dev->promiscuous_mode != nwpan_dev->promiscuous_mode)
- return -EBUSY;
- }
+ if (sdata->iface_default_filtering != nsdata->iface_default_filtering)
+ return -EBUSY;
if (local->hw.flags & IEEE802154_HW_AFILT) {
if (wpan_dev->pan_id != nwpan_dev->pan_id ||
@@ -285,8 +274,7 @@ ieee802154_check_concurrent_iface(struct ieee802154_sub_if_data *sdata,
/* check all phy mac sublayer settings are the same.
* We have only one phy, different values makes trouble.
*/
- ret = ieee802154_check_mac_settings(local, wpan_dev,
- &nsdata->wpan_dev);
+ ret = ieee802154_check_mac_settings(local, sdata, nsdata);
if (ret < 0)
return ret;
}
@@ -586,7 +574,7 @@ ieee802154_setup_sdata(struct ieee802154_sub_if_data *sdata,
sdata->dev->priv_destructor = mac802154_wpan_free;
sdata->dev->netdev_ops = &mac802154_wpan_ops;
sdata->dev->ml_priv = &mac802154_mlme_wpan;
- wpan_dev->promiscuous_mode = false;
+ sdata->iface_default_filtering = IEEE802154_FILTERING_4_FRAME_FIELDS;
wpan_dev->header_ops = &ieee802154_header_ops;
mutex_init(&sdata->sec_mtx);
@@ -600,7 +588,7 @@ ieee802154_setup_sdata(struct ieee802154_sub_if_data *sdata,
case NL802154_IFTYPE_MONITOR:
sdata->dev->needs_free_netdev = true;
sdata->dev->netdev_ops = &mac802154_monitor_ops;
- wpan_dev->promiscuous_mode = true;
+ sdata->iface_default_filtering = IEEE802154_FILTERING_NONE;
break;
default:
BUG();
@@ -270,10 +270,20 @@ void ieee802154_rx(struct ieee802154_local *local, struct sk_buff *skb)
ieee802154_monitors_rx(local, skb);
+ /* TODO: Avoid delivering frames received at the level
+ * IEEE802154_FILTERING_NONE on interfaces not expecting it because of
+ * the missing auto ACK handling feature.
+ */
+
+ /* TODO: Handle upcomming receive path where the PHY is at the
+ * IEEE802154_FILTERING_NONE level during a scan.
+ */
+
/* Check if transceiver doesn't validate the checksum.
* If not we validate the checksum here.
*/
- if (local->hw.flags & IEEE802154_HW_RX_DROP_BAD_CKSUM) {
+ if (local->hw.flags & IEEE802154_HW_RX_DROP_BAD_CKSUM ||
+ local->phy->filtering == IEEE802154_FILTERING_NONE) {
crc = crc_ccitt(0, skb->data, skb->len);
if (crc) {
rcu_read_unlock();