diff mbox

[LTSI-3.14,802/894] ARM: shmobile: koelsch dts: Add VDD MPU regulator for DVFS

Message ID 1409209620-24487-803-git-send-email-horms+renesas@verge.net.au (mailing list archive)
State New, archived
Headers show

Commit Message

Simon Horman Aug. 28, 2014, 7:05 a.m. UTC 
From: Gaku Inami <gaku.inami.xw@bp.renesas.com>

The CA15 cluster is capable of voltage scaling. Add the regulator
in the i2c6 node, to allow the generic CPUFreq driver to use it.

Enable the i2c6 pin mux and the device node as well since the
da9210 is connected to that bus.

Note: In R-CAR Gen2, each frequency is using the same voltage,
and DVS control is not used. Therefore, this patch set the
voltage(Vmin/Vmax) to 1000mv.

Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 1d41f36a68c0f4e9b01d563ce33bab5201858b54)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 05d44f9..95331d7 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -293,6 +293,11 @@ 
 				 "msiof0_tx";
 		renesas,function = "msiof0";
 	};
+
+	i2c6_pins: i2c6 {
+		renesas,groups = "i2c6";
+		renesas,function = "i2c6";
+	};
 };
 
 &ether {
@@ -408,3 +413,19 @@ 
 		spi-cpha;
 	};
 };
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	status = "okay";
+
+	vdd_dvfs: regulator@68 {
+		compatible = "diasemi,da9210";
+		reg = <0x68>;
+
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};