diff mbox

[0571/1094] drm/i915: restore backlight precision when converting from ACPI

Message ID 1413889294-31328-572-git-send-email-dheerajx.s.jamwal@intel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Dheeraj Jamwal Oct. 21, 2014, 10:52 a.m. UTC 
From: Aaron Lu <aaron.lu@intel.com>

When we set backlight on behalf of ACPI opregion, we will convert the
backlight value in the 0-255 range defined in opregion to the actual
hardware level. Commit 22505b82a2 (drm/i915: avoid brightness overflow
when doing scale) is meant to fix the overflow problem when doing the
conversion, but it also caused a problem that the converted hardware
level doesn't quite represent the intended value: say user wants maximum
backlight level(255 in opregion's range), then we will calculate the
actual hardware level to be: level = freq / max * level, where freq is
the hardware's max backlight level(937 on an user's box), and max and
level are all 255. The converted value should be 937 but the above
calculation will yield 765.

To fix this issue, just use 64 bits to do the calculation to keep the
precision and avoid overflow at the same time.

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=72491
Reported-by: Nico Schottelius <nico-bugzilla.kernel.org@schottelius.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 721e82c08c1afd6b47367b0e0c4a62140b0667f3)

Signed-off-by: Dheeraj Jamwal <dheerajx.s.jamwal@intel.com>
---
 drivers/gpu/drm/i915/intel_panel.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index cb05840..63129dc 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -492,6 +492,7 @@  void intel_panel_set_backlight(struct intel_connector *connector, u32 level,
 	enum pipe pipe = intel_get_pipe_from_connector(connector);
 	u32 freq;
 	unsigned long flags;
+	u64 n;
 
 	if (!panel->backlight.present || pipe == INVALID_PIPE)
 		return;
@@ -502,10 +503,9 @@  void intel_panel_set_backlight(struct intel_connector *connector, u32 level,
 
 	/* scale to hardware max, but be careful to not overflow */
 	freq = panel->backlight.max;
-	if (freq < max)
-		level = level * freq / max;
-	else
-		level = freq / max * level;
+	n = (u64)level * freq;
+	do_div(n, max);
+	level = n;
 
 	panel->backlight.level = level;
 	if (panel->backlight.device)