@@ -42,6 +42,59 @@ intel_fixed_panel_mode(const struct drm_display_mode *fixed_mode,
drm_mode_set_crtcinfo(adjusted_mode, 0);
}
+/**
+ * intel_find_panel_downclock - find the reduced downclock for LVDS in EDID
+ * @dev: drm device
+ * @fixed_mode : panel native mode
+ * @connector: LVDS/eDP connector
+ *
+ * Return downclock_avail
+ * Find the reduced downclock for LVDS/eDP in EDID.
+ */
+struct drm_display_mode *
+intel_find_panel_downclock(struct drm_device *dev,
+ struct drm_display_mode *fixed_mode,
+ struct drm_connector *connector)
+{
+ struct drm_display_mode *scan, *tmp_mode;
+ int temp_downclock;
+
+ temp_downclock = fixed_mode->clock;
+ tmp_mode = NULL;
+
+ list_for_each_entry(scan, &connector->probed_modes, head) {
+ /*
+ * If one mode has the same resolution with the fixed_panel
+ * mode while they have the different refresh rate, it means
+ * that the reduced downclock is found. In such
+ * case we can set the different FPx0/1 to dynamically select
+ * between low and high frequency.
+ */
+ if (scan->hdisplay == fixed_mode->hdisplay &&
+ scan->hsync_start == fixed_mode->hsync_start &&
+ scan->hsync_end == fixed_mode->hsync_end &&
+ scan->htotal == fixed_mode->htotal &&
+ scan->vdisplay == fixed_mode->vdisplay &&
+ scan->vsync_start == fixed_mode->vsync_start &&
+ scan->vsync_end == fixed_mode->vsync_end &&
+ scan->vtotal == fixed_mode->vtotal) {
+ if (scan->clock < temp_downclock) {
+ /*
+ * The downclock is already found. But we
+ * expect to find the lower downclock.
+ */
+ temp_downclock = scan->clock;
+ tmp_mode = scan;
+ }
+ }
+ }
+
+ if (temp_downclock < fixed_mode->clock)
+ return drm_mode_duplicate(dev, tmp_mode);
+ else
+ return NULL;
+}
+
/* adjusted_mode has been preset to be the panel's fixed mode */
void
intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
@@ -323,6 +376,28 @@ out:
pipe_config->gmch_pfit.lvds_border_bits = border;
}
+enum drm_connector_status
+intel_panel_detect(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ /* Assume that the BIOS does not lie through the OpRegion... */
+ if (!i915.panel_ignore_lid && dev_priv->opregion.lid_state) {
+ return ioread32(dev_priv->opregion.lid_state) & 0x1 ?
+ connector_status_connected :
+ connector_status_disconnected;
+ }
+
+ switch (i915.panel_ignore_lid) {
+ case -2:
+ return connector_status_connected;
+ case -1:
+ return connector_status_disconnected;
+ default:
+ return connector_status_unknown;
+ }
+}
+
static u32 intel_panel_compute_brightness(struct intel_connector *connector,
u32 val)
{
@@ -795,28 +870,6 @@ void intel_panel_enable_backlight(struct intel_connector *connector)
spin_unlock_irqrestore(&dev_priv->backlight_lock, flags);
}
-enum drm_connector_status
-intel_panel_detect(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- /* Assume that the BIOS does not lie through the OpRegion... */
- if (!i915.panel_ignore_lid && dev_priv->opregion.lid_state) {
- return ioread32(dev_priv->opregion.lid_state) & 0x1 ?
- connector_status_connected :
- connector_status_disconnected;
- }
-
- switch (i915.panel_ignore_lid) {
- case -2:
- return connector_status_connected;
- case -1:
- return connector_status_disconnected;
- default:
- return connector_status_unknown;
- }
-}
-
#if IS_ENABLED(CONFIG_BACKLIGHT_CLASS_DEVICE)
static int intel_backlight_device_update_status(struct backlight_device *bd)
{
@@ -1098,59 +1151,6 @@ void intel_panel_destroy_backlight(struct drm_connector *connector)
intel_backlight_device_unregister(intel_connector);
}
-/**
- * intel_find_panel_downclock - find the reduced downclock for LVDS in EDID
- * @dev: drm device
- * @fixed_mode : panel native mode
- * @connector: LVDS/eDP connector
- *
- * Return downclock_avail
- * Find the reduced downclock for LVDS/eDP in EDID.
- */
-struct drm_display_mode *
-intel_find_panel_downclock(struct drm_device *dev,
- struct drm_display_mode *fixed_mode,
- struct drm_connector *connector)
-{
- struct drm_display_mode *scan, *tmp_mode;
- int temp_downclock;
-
- temp_downclock = fixed_mode->clock;
- tmp_mode = NULL;
-
- list_for_each_entry(scan, &connector->probed_modes, head) {
- /*
- * If one mode has the same resolution with the fixed_panel
- * mode while they have the different refresh rate, it means
- * that the reduced downclock is found. In such
- * case we can set the different FPx0/1 to dynamically select
- * between low and high frequency.
- */
- if (scan->hdisplay == fixed_mode->hdisplay &&
- scan->hsync_start == fixed_mode->hsync_start &&
- scan->hsync_end == fixed_mode->hsync_end &&
- scan->htotal == fixed_mode->htotal &&
- scan->vdisplay == fixed_mode->vdisplay &&
- scan->vsync_start == fixed_mode->vsync_start &&
- scan->vsync_end == fixed_mode->vsync_end &&
- scan->vtotal == fixed_mode->vtotal) {
- if (scan->clock < temp_downclock) {
- /*
- * The downclock is already found. But we
- * expect to find the lower downclock.
- */
- temp_downclock = scan->clock;
- tmp_mode = scan;
- }
- }
- }
-
- if (temp_downclock < fixed_mode->clock)
- return drm_mode_duplicate(dev, tmp_mode);
- else
- return NULL;
-}
-
/* Set up chip specific backlight functions */
void intel_panel_init_backlight_funcs(struct drm_device *dev)
{