diff mbox

[0995/1094] drm/i915: Draw a picture about video timings

Message ID 1413889294-31328-996-git-send-email-dheerajx.s.jamwal@intel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Dheeraj Jamwal Oct. 21, 2014, 10:59 a.m. UTC 
From: Ville Syrjälä <ville.syrjala@linux.intel.com>

The docs are a bit lacking when it comes to describing when certain
timing related events occur in the hardware. Draw a picture which
tries to capture the most important ones.

v2: Clarify a few details (Imre)
v3: Add HSW+ HDMI scanline counter numbers

Acked-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Akash Goel <akash.goels@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: "Sourab Gupta <sourabgupta@gmail.com>"
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit f75f3746e801504531bffc9f92e1d4a271705f7e)

Signed-off-by: Dheeraj Jamwal <dheerajx.s.jamwal@intel.com>
---
 drivers/gpu/drm/i915/i915_irq.c |   50 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)
diff mbox

Patch

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 16880cf..087e76b 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -740,6 +740,56 @@  i915_pipe_enabled(struct drm_device *dev, int pipe)
 	}
 }
 
+/*
+ * This timing diagram depicts the video signal in and
+ * around the vertical blanking period.
+ *
+ * Assumptions about the fictitious mode used in this example:
+ *  vblank_start >= 3
+ *  vsync_start = vblank_start + 1
+ *  vsync_end = vblank_start + 2
+ *  vtotal = vblank_start + 3
+ *
+ *           start of vblank:
+ *           latch double buffered registers
+ *           increment frame counter (ctg+)
+ *           generate start of vblank interrupt (gen4+)
+ *           |
+ *           |          frame start:
+ *           |          generate frame start interrupt (aka. vblank interrupt) (gmch)
+ *           |          may be shifted forward 1-3 extra lines via PIPECONF
+ *           |          |
+ *           |          |  start of vsync:
+ *           |          |  generate vsync interrupt
+ *           |          |  |
+ * ___xxxx___    ___xxxx___    ___xxxx___    ___xxxx___    ___xxxx___    ___xxxx
+ *       .   \hs/   .      \hs/          \hs/          \hs/   .      \hs/
+ * ----va---> <-----------------vb--------------------> <--------va-------------
+ *       |          |       <----vs----->                     |
+ * -vbs-----> <---vbs+1---> <---vbs+2---> <-----0-----> <-----1-----> <-----2--- (scanline counter gen2)
+ * -vbs-2---> <---vbs-1---> <---vbs-----> <---vbs+1---> <---vbs+2---> <-----0--- (scanline counter gen3+)
+ * -vbs-2---> <---vbs-2---> <---vbs-1---> <---vbs-----> <---vbs+1---> <---vbs+2- (scanline counter hsw+ hdmi)
+ *       |          |                                         |
+ *       last visible pixel                                   first visible pixel
+ *                  |                                         increment frame counter (gen3/4)
+ *                  pixel counter = vblank_start * htotal     pixel counter = 0 (gen3/4)
+ *
+ * x  = horizontal active
+ * _  = horizontal blanking
+ * hs = horizontal sync
+ * va = vertical active
+ * vb = vertical blanking
+ * vs = vertical sync
+ * vbs = vblank_start (number)
+ *
+ * Summary:
+ * - most events happen at the start of horizontal sync
+ * - frame start happens at the start of horizontal blank, 1-4 lines
+ *   (depending on PIPECONF settings) after the start of vblank
+ * - gen3/4 pixel and frame counter are synchronized with the start
+ *   of horizontal active on the first line of vertical active
+ */
+
 static u32 i8xx_get_vblank_counter(struct drm_device *dev, int pipe)
 {
 	/* Gen2 doesn't have a hardware frame counter */