diff mbox series

[iproute2-next] mptcp: add support for changing the backup flag

Message ID cb2ddffb2211d6fdde7a8bf81879a3a83c620f00.1638542999.git.dcaratti@redhat.com (mailing list archive)
State Mainlined, archived
Delegated to: Matthieu Baerts
Headers show
Series [iproute2-next] mptcp: add support for changing the backup flag | expand

Commit Message

Davide Caratti Dec. 3, 2021, 3:01 p.m. UTC 
Linux supports 'MPTCP_PM_CMD_SET_FLAGS' since v5.12, and this control has
recently been extended to allow setting flags for a given endpoint id.
Although there is no use for changing 'signal' or 'subflow' flags, it can
be helpful to set/clear the backup bit on existing endpoints: add the 'ip
mptcp endpoint change <...>' command for this purpose.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/158
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
---
 ip/ipmptcp.c        | 20 ++++++++++++++++----
 man/man8/ip-mptcp.8 | 14 ++++++++++++++
 2 files changed, 30 insertions(+), 4 deletions(-)

Comments

Mat Martineau Dec. 8, 2021, 1:59 a.m. UTC | #1 
On Fri, 3 Dec 2021, Davide Caratti wrote:

> Linux supports 'MPTCP_PM_CMD_SET_FLAGS' since v5.12, and this control has
> recently been extended to allow setting flags for a given endpoint id.
> Although there is no use for changing 'signal' or 'subflow' flags, it can
> be helpful to set/clear the backup bit on existing endpoints: add the 'ip
> mptcp endpoint change <...>' command for this purpose.
>
> Link: https://github.com/multipath-tcp/mptcp_net-next/issues/158
> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>

Matthieu -

Since you already Acked, what should be the status of this in patchwork?


-Mat



> Signed-off-by: Davide Caratti <dcaratti@redhat.com>
> ---
> ip/ipmptcp.c        | 20 ++++++++++++++++----
> man/man8/ip-mptcp.8 | 14 ++++++++++++++
> 2 files changed, 30 insertions(+), 4 deletions(-)
>
> diff --git a/ip/ipmptcp.c b/ip/ipmptcp.c
> index 857004446aa3..7fb48a420a6b 100644
> --- a/ip/ipmptcp.c
> +++ b/ip/ipmptcp.c
> @@ -25,6 +25,7 @@ static void usage(void)
> 		"Usage:	ip mptcp endpoint add ADDRESS [ dev NAME ] [ id ID ]\n"
> 		"				      [ port NR ] [ FLAG-LIST ]\n"
> 		"	ip mptcp endpoint delete id ID\n"
> +		"	ip mptcp endpoint change id ID [ backup | nobackup ]\n"
> 		"	ip mptcp endpoint show [ id ID ]\n"
> 		"	ip mptcp endpoint flush\n"
> 		"	ip mptcp limits set [ subflows NR ] [ add_addr_accepted NR ]\n"
> @@ -45,6 +46,8 @@ static int genl_family = -1;
> 	GENL_REQUEST(_req, MPTCP_BUFLEN, genl_family, 0,	\
> 		     MPTCP_PM_VER, _cmd, _flags)
>
> +#define MPTCP_PM_ADDR_FLAG_NOBACKUP 0x0
> +
> /* Mapping from argument to address flag mask */
> static const struct {
> 	const char *name;
> @@ -53,6 +56,7 @@ static const struct {
> 	{ "signal",		MPTCP_PM_ADDR_FLAG_SIGNAL },
> 	{ "subflow",		MPTCP_PM_ADDR_FLAG_SUBFLOW },
> 	{ "backup",		MPTCP_PM_ADDR_FLAG_BACKUP },
> +	{ "nobackup",		MPTCP_PM_ADDR_FLAG_NOBACKUP }
> };
>
> static void print_mptcp_addr_flags(unsigned int flags)
> @@ -95,9 +99,9 @@ static int get_flags(const char *arg, __u32 *flags)
> 	return -1;
> }
>
> -static int mptcp_parse_opt(int argc, char **argv, struct nlmsghdr *n,
> -			 bool adding)
> +static int mptcp_parse_opt(int argc, char **argv, struct nlmsghdr *n, int cmd)
> {
> +	bool adding = cmd == MPTCP_PM_CMD_ADD_ADDR;
> 	struct rtattr *attr_addr;
> 	bool addr_set = false;
> 	inet_prefix address;
> @@ -110,6 +114,11 @@ static int mptcp_parse_opt(int argc, char **argv, struct nlmsghdr *n,
> 	ll_init_map(&rth);
> 	while (argc > 0) {
> 		if (get_flags(*argv, &flags) == 0) {
> +			/* allow changing the 'backup' flag only */
> +			if (cmd == MPTCP_PM_CMD_SET_FLAGS &&
> +			    (flags & ~MPTCP_PM_ADDR_FLAG_BACKUP))
> +				invarg("invalid flags\n", *argv);
> +
> 		} else if (matches(*argv, "id") == 0) {
> 			NEXT_ARG();
>
> @@ -182,7 +191,7 @@ static int mptcp_addr_modify(int argc, char **argv, int cmd)
> 	MPTCP_REQUEST(req, cmd, NLM_F_REQUEST);
> 	int ret;
>
> -	ret = mptcp_parse_opt(argc, argv, &req.n, cmd == MPTCP_PM_CMD_ADD_ADDR);
> +	ret = mptcp_parse_opt(argc, argv, &req.n, cmd);
> 	if (ret)
> 		return ret;
>
> @@ -298,7 +307,7 @@ static int mptcp_addr_show(int argc, char **argv)
> 	if (argc <= 0)
> 		return mptcp_addr_dump();
>
> -	ret = mptcp_parse_opt(argc, argv, &req.n, false);
> +	ret = mptcp_parse_opt(argc, argv, &req.n, MPTCP_PM_CMD_GET_ADDR);
> 	if (ret)
> 		return ret;
>
> @@ -534,6 +543,9 @@ int do_mptcp(int argc, char **argv)
> 		if (matches(*argv, "add") == 0)
> 			return mptcp_addr_modify(argc-1, argv+1,
> 						 MPTCP_PM_CMD_ADD_ADDR);
> +		if (matches(*argv, "change") == 0)
> +			return mptcp_addr_modify(argc-1, argv+1,
> +						 MPTCP_PM_CMD_SET_FLAGS);
> 		if (matches(*argv, "delete") == 0)
> 			return mptcp_addr_modify(argc-1, argv+1,
> 						 MPTCP_PM_CMD_DEL_ADDR);
> diff --git a/man/man8/ip-mptcp.8 b/man/man8/ip-mptcp.8
> index 22335b6129ae..574cb60dc7c0 100644
> --- a/man/man8/ip-mptcp.8
> +++ b/man/man8/ip-mptcp.8
> @@ -34,6 +34,13 @@ ip-mptcp \- MPTCP path manager configuration
> .BR "ip mptcp endpoint del id "
> .I ID
>
> +.ti -8
> +.BR "ip mptcp endpoint change id "
> +.I ID
> +.RB "[ "
> +.I BACKUP-OPT
> +.RB "] "
> +
> .ti -8
> .BR "ip mptcp endpoint show "
> .RB "[ " id
> @@ -55,6 +62,13 @@ ip-mptcp \- MPTCP path manager configuration
> .B backup
> .RB  "]"
>
> +.ti -8
> +.IR BACKUP-OPT " := ["
> +.B backup
> +.RB "|"
> +.B nobackup
> +.RB  "]"
> +
> .ti -8
> .BR "ip mptcp limits set "
> .RB "[ "
> -- 
> 2.31.1
>
>
>

--
Mat Martineau
Intel
Matthieu Baerts Dec. 8, 2021, 10:23 a.m. UTC | #2 
Hi Mat, Davide

On 08/12/2021 02:59, Mat Martineau wrote:
> On Fri, 3 Dec 2021, Davide Caratti wrote:
> 
>> Linux supports 'MPTCP_PM_CMD_SET_FLAGS' since v5.12, and this control has
>> recently been extended to allow setting flags for a given endpoint id.
>> Although there is no use for changing 'signal' or 'subflow' flags, it can
>> be helpful to set/clear the backup bit on existing endpoints: add the 'ip
>> mptcp endpoint change <...>' command for this purpose.
>>
>> Link: https://github.com/multipath-tcp/mptcp_net-next/issues/158
>> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
> 
> Matthieu -
> 
> Since you already Acked, what should be the status of this in patchwork?

I just set the status as "Awaiting Upstream". Is it OK for you for
patches for other trees?

(Note: I just noticed before sending this email I already "supported"
this case in our wiki [1] :) )

@Davide: now that the linked kernel patch is in net-next, may you send
this one to netdev please?

Cheers,
Mat

[1] https://github.com/multipath-tcp/mptcp_net-next/wiki/Patchwork
Mat Martineau Dec. 8, 2021, 11:19 p.m. UTC | #3 
On Wed, 8 Dec 2021, Matthieu Baerts wrote:

> Hi Mat, Davide
>
> On 08/12/2021 02:59, Mat Martineau wrote:
>> On Fri, 3 Dec 2021, Davide Caratti wrote:
>>
>>> Linux supports 'MPTCP_PM_CMD_SET_FLAGS' since v5.12, and this control has
>>> recently been extended to allow setting flags for a given endpoint id.
>>> Although there is no use for changing 'signal' or 'subflow' flags, it can
>>> be helpful to set/clear the backup bit on existing endpoints: add the 'ip
>>> mptcp endpoint change <...>' command for this purpose.
>>>
>>> Link: https://github.com/multipath-tcp/mptcp_net-next/issues/158
>>> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
>>
>> Matthieu -
>>
>> Since you already Acked, what should be the status of this in patchwork?
>
> I just set the status as "Awaiting Upstream". Is it OK for you for
> patches for other trees?
>

Sure, that status makes sense.


--
Mat Martineau
Intel
diff mbox series

Patch

diff --git a/ip/ipmptcp.c b/ip/ipmptcp.c
index 857004446aa3..7fb48a420a6b 100644
--- a/ip/ipmptcp.c
+++ b/ip/ipmptcp.c
@@ -25,6 +25,7 @@  static void usage(void)
 		"Usage:	ip mptcp endpoint add ADDRESS [ dev NAME ] [ id ID ]\n"
 		"				      [ port NR ] [ FLAG-LIST ]\n"
 		"	ip mptcp endpoint delete id ID\n"
+		"	ip mptcp endpoint change id ID [ backup | nobackup ]\n"
 		"	ip mptcp endpoint show [ id ID ]\n"
 		"	ip mptcp endpoint flush\n"
 		"	ip mptcp limits set [ subflows NR ] [ add_addr_accepted NR ]\n"
@@ -45,6 +46,8 @@  static int genl_family = -1;
 	GENL_REQUEST(_req, MPTCP_BUFLEN, genl_family, 0,	\
 		     MPTCP_PM_VER, _cmd, _flags)
 
+#define MPTCP_PM_ADDR_FLAG_NOBACKUP 0x0
+
 /* Mapping from argument to address flag mask */
 static const struct {
 	const char *name;
@@ -53,6 +56,7 @@  static const struct {
 	{ "signal",		MPTCP_PM_ADDR_FLAG_SIGNAL },
 	{ "subflow",		MPTCP_PM_ADDR_FLAG_SUBFLOW },
 	{ "backup",		MPTCP_PM_ADDR_FLAG_BACKUP },
+	{ "nobackup",		MPTCP_PM_ADDR_FLAG_NOBACKUP }
 };
 
 static void print_mptcp_addr_flags(unsigned int flags)
@@ -95,9 +99,9 @@  static int get_flags(const char *arg, __u32 *flags)
 	return -1;
 }
 
-static int mptcp_parse_opt(int argc, char **argv, struct nlmsghdr *n,
-			 bool adding)
+static int mptcp_parse_opt(int argc, char **argv, struct nlmsghdr *n, int cmd)
 {
+	bool adding = cmd == MPTCP_PM_CMD_ADD_ADDR;
 	struct rtattr *attr_addr;
 	bool addr_set = false;
 	inet_prefix address;
@@ -110,6 +114,11 @@  static int mptcp_parse_opt(int argc, char **argv, struct nlmsghdr *n,
 	ll_init_map(&rth);
 	while (argc > 0) {
 		if (get_flags(*argv, &flags) == 0) {
+			/* allow changing the 'backup' flag only */
+			if (cmd == MPTCP_PM_CMD_SET_FLAGS &&
+			    (flags & ~MPTCP_PM_ADDR_FLAG_BACKUP))
+				invarg("invalid flags\n", *argv);
+
 		} else if (matches(*argv, "id") == 0) {
 			NEXT_ARG();
 
@@ -182,7 +191,7 @@  static int mptcp_addr_modify(int argc, char **argv, int cmd)
 	MPTCP_REQUEST(req, cmd, NLM_F_REQUEST);
 	int ret;
 
-	ret = mptcp_parse_opt(argc, argv, &req.n, cmd == MPTCP_PM_CMD_ADD_ADDR);
+	ret = mptcp_parse_opt(argc, argv, &req.n, cmd);
 	if (ret)
 		return ret;
 
@@ -298,7 +307,7 @@  static int mptcp_addr_show(int argc, char **argv)
 	if (argc <= 0)
 		return mptcp_addr_dump();
 
-	ret = mptcp_parse_opt(argc, argv, &req.n, false);
+	ret = mptcp_parse_opt(argc, argv, &req.n, MPTCP_PM_CMD_GET_ADDR);
 	if (ret)
 		return ret;
 
@@ -534,6 +543,9 @@  int do_mptcp(int argc, char **argv)
 		if (matches(*argv, "add") == 0)
 			return mptcp_addr_modify(argc-1, argv+1,
 						 MPTCP_PM_CMD_ADD_ADDR);
+		if (matches(*argv, "change") == 0)
+			return mptcp_addr_modify(argc-1, argv+1,
+						 MPTCP_PM_CMD_SET_FLAGS);
 		if (matches(*argv, "delete") == 0)
 			return mptcp_addr_modify(argc-1, argv+1,
 						 MPTCP_PM_CMD_DEL_ADDR);
diff --git a/man/man8/ip-mptcp.8 b/man/man8/ip-mptcp.8
index 22335b6129ae..574cb60dc7c0 100644
--- a/man/man8/ip-mptcp.8
+++ b/man/man8/ip-mptcp.8
@@ -34,6 +34,13 @@  ip-mptcp \- MPTCP path manager configuration
 .BR "ip mptcp endpoint del id "
 .I ID
 
+.ti -8
+.BR "ip mptcp endpoint change id "
+.I ID
+.RB "[ "
+.I BACKUP-OPT
+.RB "] "
+
 .ti -8
 .BR "ip mptcp endpoint show "
 .RB "[ " id
@@ -55,6 +62,13 @@  ip-mptcp \- MPTCP path manager configuration
 .B backup
 .RB  "]"
 
+.ti -8
+.IR BACKUP-OPT " := ["
+.B backup
+.RB "|"
+.B nobackup
+.RB  "]"
+
 .ti -8
 .BR "ip mptcp limits set "
 .RB "[ "