[net-next,v4,0/4] Support for RollBall 10G copper SFP modules

Message

Marek Behún Jan. 11, 2021, 5 a.m. UTC

Hello,

this is v4 of series adding support for RollBall/Hilink SFP modules.

Checked with:
  checkpatch.pl --max-line-length=80

Changes from v3:
- RollBall mdio-i2c driver now sets/restores SFP_PAGE for every MDIO
  access.
  I first wanted to achieve this operation (setting
  SFP_PAGE/doing MDIO/restoring SFP_PAGE) via one call do i2c_transfer,
  by constructing msgs array in such a way, but it turned out that this
  doesn't work on RollBall SFPs, because changed SFP_PAGE takes into
  account only after i2c_transfer ends.
  So instead I use i2c_lock_bus/serveral __i2c_transfers/i2c_unlock_bus.
- I have removed the patch which changes MACTYPE in the marvell10g
  driver, since Russell has in his net-queue a better solution. I still
  think that my patch would have sufficed temporarily (and would not
  cause regressions), but nobody wanted to review it. If you think that
  I should sent this series again with that patch, please let me know.

Changes from v2:
- added comment into the patch adding support for RollBall I2C MDIO
  protocol, saying that we expect the SFP_PAGE not to be changed by
  the SFP code, as requested by Russell. If, in the future, SFP code
  starts modifying SFP_PAGE, we will have to handle it in mdio-i2c
  somehow
- destruction of I2C MDIO bus in patch 3/5 now depends on whether the
  MDIO bus is not NULL, instead of whether PHY exists, as suggested by
  Russell
- changed waiting time for RollBall module to initialize from 30 seconds
  to 25 seconds. Testing shows that it is never longer than 21-22
  seconds, so waiting 25 seconds instead of 30 is IMO safe enough
- added Russell's Reviewed-by tags where relevant

Changes from v1:
- wrapped to 80 columns as per Russell's request
- initialization of RollBall MDIO I2C protocol moved from sfp.c to
  mdio-i2c.c as per Russell's request
- second patch removes the 802.3z check also from phylink_sfp_config
  as suggested by Russell
- creation/destruction of mdiobus for SFP now occurs before probing
  for PHY/after releasing PHY (as suggested by Russell)
- the last patch became a little simpler after the above was done

Cc: Andrew Lunn <[e-mail]>
Cc: Russell King <[e-mail]>

Marek Behún (4):
  net: phy: mdio-i2c: support I2C MDIO protocol for RollBall SFP modules
  net: phylink: allow attaching phy for SFP modules on 802.3z mode
  net: sfp: create/destroy I2C mdiobus before PHY probe/after PHY
    release
  net: sfp: add support for multigig RollBall transceivers

 drivers/net/mdio/mdio-i2c.c   | 319 +++++++++++++++++++++++++++++++++-
 drivers/net/phy/phylink.c     |   5 +-
 drivers/net/phy/sfp.c         |  66 +++++--
 include/linux/mdio/mdio-i2c.h |   8 +-
 4 files changed, 378 insertions(+), 20 deletions(-)


base-commit: 73b7a6047971aa6ce4a70fc4901964d14f077171