[RFC,v2,linux-next,00/14] Add NXP SJA1110 support to the sja1105 DSA driver

Message

Vladimir Oltean May 26, 2021, 1:55 p.m. UTC

This patch series is sent as RFC and based on linux-next because it
depends on some changes which are in "net" but not in "net-next".

Changes in v2:
- converted nxp,sja1105 DT bindings to YAML
- registered the PCS MDIO bus and forced auto-probing off for all PHY
  addresses for this bus
- changed the container node name for the 2 MDIO buses from "mdio" to
  "mdios" to avoid matching on the mdio.yaml schema (it's just a
  container node, not an MDIO bus)
- fixed an uninitialized "offset" variable usage in
  sja1110_pcs_mdio_{read,write}
- using the mdiobus_c45_addr macro instead of open-coding that operation

Reason for reposting so early:
Would like some feedback on the DT bindings for the internal MDIO buses.

Feedback from v1 not addressed:
(Q) Can the Synopsys PCS initialization code be moved into
    drivers/net/pcs/xpcs.c?
(A) Yes and no. Initializing the PCS is not sufficient for proper
    SGMII/2500base-x operation, one also needs to initialize the
    non-Synopsys PMA/PMD, which is accessible through the same
    struct mdio_device as the PCS itself.
(Q) No interrupts for the internal PHYs?
(A) In a later patch series (this one is already large), and only in a
    reduced functionality mode, where the switch driver registers an
    irqchip but it busy polls the interrupt status register. The board I
    am working on does not have the switch interrupt pin wired.

Previous cover letter:

The NXP SJA1110 is an automotive Ethernet switch with an embedded Arm
Cortex-M7 microcontroller. The switch has 11 ports (10 external + one
for the DSA-style connection to the microcontroller).
The microcontroller can be disabled and the switch can be controlled
over SPI, a la SJA1105 - this is how this driver handles things.

There are some integrated NXP PHYs (100base-T1 and 100base-TX). Their
initialization is handled by their own PHY drivers, the switch is only
concerned with enabling register accesses to them, by registering two
MDIO buses.

Cc: Russell King <[e-mail]>
Cc: Rob Herring <[e-mail]>

Vladimir Oltean (14):
  net: dsa: sja1105: be compatible with "ethernet-ports" OF node name
  net: dsa: sja1105: allow SGMII PCS configuration to be per port
  net: dsa: sja1105: the 0x1F0000 SGMII "base address" is actually
    MDIO_MMD_VEND2
  net: dsa: sja1105: cache the phy-mode port property
  net: dsa: sja1105: add a PHY interface type compatibility matrix
  net: dsa: sja1105: add a translation table for port speeds
  net: dsa: sja1105: always keep RGMII ports in the MAC role
  net: dsa: sja1105: some table entries are always present when read
    dynamically
  dt-bindings: net: dsa: sja1105: convert to YAML schema
  dt-bindings: net: dsa: sja1105: add SJA1110 bindings
  net: dsa: sja1105: add support for the SJA1110 switch family
  net: dsa: sja1105: register the MDIO buses for 100base-T1 and
    100base-TX
  net: dsa: sja1105: expose the SGMII PCS as an mdio_device
  net: dsa: sja1105: add support for the SJA1110 SGMII/2500base-x PCS

 .../bindings/net/dsa/nxp,sja1105.yaml         | 172 ++++++
 .../devicetree/bindings/net/dsa/sja1105.txt   | 156 -----
 drivers/net/dsa/sja1105/Makefile              |   1 +
 drivers/net/dsa/sja1105/sja1105.h             |  88 ++-
 drivers/net/dsa/sja1105/sja1105_clocking.c    | 120 +++-
 .../net/dsa/sja1105/sja1105_dynamic_config.c  | 336 ++++++++++-
 .../net/dsa/sja1105/sja1105_dynamic_config.h  |   1 +
 drivers/net/dsa/sja1105/sja1105_main.c        | 518 +++++++++++++----
 drivers/net/dsa/sja1105/sja1105_mdio.c        | 539 ++++++++++++++++++
 drivers/net/dsa/sja1105/sja1105_sgmii.h       |  63 +-
 drivers/net/dsa/sja1105/sja1105_spi.c         | 368 +++++++++++-
 .../net/dsa/sja1105/sja1105_static_config.c   | 483 ++++++++++++++++
 .../net/dsa/sja1105/sja1105_static_config.h   |  98 +++-
 13 files changed, 2619 insertions(+), 324 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
 delete mode 100644 Documentation/devicetree/bindings/net/dsa/sja1105.txt
 create mode 100644 drivers/net/dsa/sja1105/sja1105_mdio.c