[net-next,v2,0/3] Add Xilinx GMII2RGMII loopback support

Message

Gerhard Engleder Aug. 19, 2021, 1:11 p.m. UTC

The Xilinx GMII2RGMII driver overrides PHY driver functions in order to
configure the device according to the link speed of the PHY attached to
it. This is implemented for a normal link but not for loopback.

Andrew told me to use phy_loopback and this changes make phy_loopback
work in combination with Xilinx GMII2RGMII.

v2: Uniform PHY driver access

Gerhard Engleder (3):
  net: phy: Support set_loopback override
  net: phy: Uniform PHY driver access
  net: phy: gmii2rgmii: Support PHY loopback

 drivers/net/phy/phy_device.c        | 13 ++++----
 drivers/net/phy/xilinx_gmii2rgmii.c | 46 ++++++++++++++++++++++-------
 2 files changed, 40 insertions(+), 19 deletions(-)

Comments

[e-mail] Aug. 20, 2021, 1:40 p.m. UTC | #1

Hello:

This series was applied to netdev/net-next.git (refs/heads/master):

On Thu, 19 Aug 2021 15:11:51 +0200 you wrote:
> The Xilinx GMII2RGMII driver overrides PHY driver functions in order to
> configure the device according to the link speed of the PHY attached to
> it. This is implemented for a normal link but not for loopback.
> 
> Andrew told me to use phy_loopback and this changes make phy_loopback
> work in combination with Xilinx GMII2RGMII.
> 
> [...]

Here is the summary with links:
  - [net-next,v2,1/3] net: phy: Support set_loopback override
    https://git.kernel.org/netdev/net-next/c/4ed311b08a91
  - [net-next,v2,2/3] net: phy: Uniform PHY driver access
    https://git.kernel.org/netdev/net-next/c/3ac8eed62596
  - [net-next,v2,3/3] net: phy: gmii2rgmii: Support PHY loopback
    https://git.kernel.org/netdev/net-next/c/ceaeaafc8b62

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html