[net-next,0/8] dpaa2-mac: add support for changing the protocol at runtime

Message

Ioana Ciornei March 9, 2022, 2:37 p.m. UTC

This patch set adds support for changing the Ethernet protocol at
runtime on Layerscape SoCs which have the Lynx 28G SerDes block.

The first two patches add a new generic PHY driver for the Lynx 28G and
the bindings file associated. The driver reads the PLL configuration at
probe time (the frequency provided to the lanes) and determines what
protocols can be supported.
Based on this the driver can deny or approve a request from the
dpaa2-mac to setup a new protocol.

The next 2 patches add some MC APIs for inquiring what is the running
version of firmware and setting up a new protocol on the MAC.

Moving along, we extract the code for setting up the supported
interfaces on a MAC on a different function since in the next patches
will update the logic.

In the next patch, the dpaa2-mac is updated so that it retrieves the
SerDes PHY based on the OF node and in case of a major reconfig, call
the PHY driver to set up the new protocol on the associated lane and the
MC firmware to reconfigure the MAC side of things.

Finally, the LX2160A dtsi is annotated with the SerDes PHY nodes for the
1st SerDes block. Beside this, the LX2160A Clearfog dtsi is annotated
with the 'phys' property for the exposed SFP cages.

Ioana Ciornei (8):
  phy: add support for the Layerscape SerDes 28G
  dt-bindings: phy: add the "fsl,lynx-28g" compatible
  dpaa2-mac: add the MC API for retrieving the version
  dpaa2-mac: add the MC API for reconfiguring the protocol
  dpaa2-mac: retrieve API version and detect features
  dpaa2-mac: move setting up supported_interfaces into a function
  dpaa2-mac: configure the SerDes phy on a protocol change
  arch: arm64: dts: lx2160a: describe the SerDes block #1

 .../devicetree/bindings/phy/fsl,lynx-28g.yaml |  71 ++
 MAINTAINERS                                   |   7 +
 .../freescale/fsl-lx2160a-clearfog-itx.dtsi   |   4 +
 .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi |  41 ++
 .../net/ethernet/freescale/dpaa2/dpaa2-eth.c  |   5 +-
 .../net/ethernet/freescale/dpaa2/dpaa2-mac.c  | 164 ++++-
 .../net/ethernet/freescale/dpaa2/dpaa2-mac.h  |   8 +
 .../ethernet/freescale/dpaa2/dpaa2-switch.c   |   5 +-
 .../net/ethernet/freescale/dpaa2/dpmac-cmd.h  |  12 +
 drivers/net/ethernet/freescale/dpaa2/dpmac.c  |  54 ++
 drivers/net/ethernet/freescale/dpaa2/dpmac.h  |   5 +
 drivers/phy/freescale/Kconfig                 |  10 +
 drivers/phy/freescale/Makefile                |   1 +
 drivers/phy/freescale/phy-fsl-lynx-28g.c      | 629 ++++++++++++++++++
 14 files changed, 995 insertions(+), 21 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml
 create mode 100644 drivers/phy/freescale/phy-fsl-lynx-28g.c

Comments

Ioana Ciornei March 9, 2022, 4:38 p.m. UTC | #1

On Wed, Mar 09, 2022 at 04:37:43PM +0200, Ioana Ciornei wrote:
> This patch set adds support for changing the Ethernet protocol at
> runtime on Layerscape SoCs which have the Lynx 28G SerDes block.
> 
> The first two patches add a new generic PHY driver for the Lynx 28G and
> the bindings file associated. The driver reads the PLL configuration at
> probe time (the frequency provided to the lanes) and determines what
> protocols can be supported.
> Based on this the driver can deny or approve a request from the
> dpaa2-mac to setup a new protocol.
> 
> The next 2 patches add some MC APIs for inquiring what is the running
> version of firmware and setting up a new protocol on the MAC.
> 
> Moving along, we extract the code for setting up the supported
> interfaces on a MAC on a different function since in the next patches
> will update the logic.
> 
> In the next patch, the dpaa2-mac is updated so that it retrieves the
> SerDes PHY based on the OF node and in case of a major reconfig, call
> the PHY driver to set up the new protocol on the associated lane and the
> MC firmware to reconfigure the MAC side of things.
> 
> Finally, the LX2160A dtsi is annotated with the SerDes PHY nodes for the
> 1st SerDes block. Beside this, the LX2160A Clearfog dtsi is annotated
> with the 'phys' property for the exposed SFP cages.
> 
> Ioana Ciornei (8):
>   phy: add support for the Layerscape SerDes 28G
>   dt-bindings: phy: add the "fsl,lynx-28g" compatible
>   dpaa2-mac: add the MC API for retrieving the version
>   dpaa2-mac: add the MC API for reconfiguring the protocol
>   dpaa2-mac: retrieve API version and detect features
>   dpaa2-mac: move setting up supported_interfaces into a function
>   dpaa2-mac: configure the SerDes phy on a protocol change
>   arch: arm64: dts: lx2160a: describe the SerDes block #1

I forgot the MODULE_LICENSE for the generic PHY driver.

I'll send a v2 so that we can actually see if the build step is clean.

Ioana