| Message ID | 20220715215954.1449214-1-sean.anderson@seco.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | net: dpaa: Convert to phylink | expand |
> -----Original Message----- > From: Sean Anderson <sean.anderson@seco.com> > Sent: Saturday, July 16, 2022 0:59 > To: David S . Miller <davem@davemloft.net>; Jakub Kicinski > <kuba@kernel.org>; Madalin Bucur <madalin.bucur@nxp.com>; > netdev@vger.kernel.org > Cc: Paolo Abeni <pabeni@redhat.com>; Eric Dumazet > <edumazet@google.com>; linux-arm-kernel@lists.infradead.org; Russell > King <linux@armlinux.org.uk>; linux-kernel@vger.kernel.org; Sean Anderson > <sean.anderson@seco.com>; Alexandru Marginean > <alexandru.marginean@nxp.com>; Andrew Lunn <andrew@lunn.ch>; > Benjamin Herrenschmidt <benh@kernel.crashing.org>; Heiner Kallweit > <hkallweit1@gmail.com>; Ioana Ciornei <ioana.ciornei@nxp.com>; Jonathan > Corbet <corbet@lwn.net>; Kishon Vijay Abraham I <kishon@ti.com>; > Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>; Leo Li > <leoyang.li@nxp.com>; Michael Ellerman <mpe@ellerman.id.au>; Paul > Mackerras <paulus@samba.org>; Rob Herring <robh+dt@kernel.org>; > Shawn Guo <shawnguo@kernel.org>; Vinod Koul <vkoul@kernel.org>; > Vladimir Oltean <olteanv@gmail.com>; devicetree@vger.kernel.org; linux- > doc@vger.kernel.org; linux-phy@lists.infradead.org; linuxppc- > dev@lists.ozlabs.org > Subject: [PATCH net-next v3 00/47] [RFT] net: dpaa: Convert to phylink > > This series converts the DPAA driver to phylink. Additionally, > it also adds a serdes driver to allow for dynamic reconfiguration > between 1g and 10g interfaces (such as in an SFP+ slot). These changes > are submitted together for this RFT, but they will eventually be > submitted separately to the appropriate subsystem maintainers. > > I have tried to maintain backwards compatibility with existing device > trees whereever possible. However, one area where I was unable to > achieve this was with QSGMII. Please refer to patch 4 for details. > > All mac drivers have now been converted. I would greatly appreciate if > anyone has QorIQ boards they can test/debug this series on. I only have an > LS1046ARDB. Everything but QSGMII should work without breakage; QSGMII > needs patches 42 and 43. > > The serdes driver is mostly functional (except for XFI). This series > only adds support for the LS1046ARDB SerDes (and untested LS1088ARDB), > but it should be fairly straightforward to add support for other SoCs > and boards (see Documentation/driver-api/phy/qoriq.rst). > > This is the last spin of this series with all patches included. After next > week (depending on feedback) I will resend the patches broken up as > follows: > - 5: 1000BASE-KX support > - 1, 6, 44, 45: Lynx 10G support > - 7-10, 12-14: Phy rate adaptation support > - 2-4, 15-43, 46, 47: DPAA phylink conversion Please also send patches 15-38 separately from the DPAA1 SerDes and phylink set for easier review > Patches 15-19 were first submitted as [1]. > > [1] https://lore.kernel.org/netdev/20220531195851.1592220-1-sean.anderson@seco.com/ > > Changes in v3: > - Manually expand yaml references > - Add mode configuration to device tree > - Expand pcs-handle to an array > - Incorperate some minor changes into the first FMan binding commit > - Add vendor prefix 'fsl,' to rgmii and mii properties. > - Set maxItems for pcs-names > - Remove phy-* properties from example because dt-schema complains and > I > can't be bothered to figure out how to make it work. > - Add pcs-handle as a preferred version of pcsphy-handle > - Deprecate pcsphy-handle > - Remove mii/rmii properties > - Add 1000BASE-KX interface mode > - Rename remaining references to QorIQ SerDes to Lynx 10G > - Fix PLL enable sequence by waiting for our reset request to be cleared > before continuing. Do the same for the lock, even though it isn't as > critical. Because we will delay for 1.5ms on average, use prepare > instead of enable so we can sleep. > - Document the status of each protocol > - Fix offset of several bitfields in RECR0 > - Take into account PLLRST_B, SDRST_B, and SDEN when considering whether > a PLL is "enabled." > - Only power off unused lanes. > - Split mode lane mask into first/last lane (like group) > - Read modes from device tree > - Use caps to determine whether KX/KR are supported > - Move modes to lynx_priv > - Ensure that the protocol controller is not already in-use when we try > to configure a new mode. This should only occur if the device tree is > misconfigured (e.g. when QSGMII is selected on two lanes but there is > only one QSGMII controller). > - Split PLL drivers off into their own file > - Add clock for "ext_dly" instead of writing the bit directly (and > racing with any clock code). > - Use kasprintf instead of open-coding the snprintf dance > - Support 1000BASE-KX in lynx_lookup_proto. This still requires PCS > support, so nothing is truly "enabled" yet. > - Add support for phy rate adaptation > - Support differing link speeds and interface speeds > - Adjust advertisement based on rate adaptation > - Adjust link settings based on rate adaptation > - Add support for CRS-based rate adaptation > - Add support for AQR115 > - Add some additional phy interfaces > - Add support for aquantia rate adaptation > - Put the PCS mdiodev only after we are done with it (since the PCS > does not perform a get itself). > - Remove _return label from memac_initialization in favor of returning > directly > - Fix grabbing the default PCS not checking for -ENODATA from > of_property_match_string > - Set DTSEC_ECNTRL_R100M in dtsec_link_up instead of dtsec_mac_config > - Remove rmii/mii properties > - Replace 1000Base... with 1000BASE... to match IEEE capitalization > - Add compatibles for QSGMII PCSs > - Split arm and powerpcs dts updates > - Describe modes in device tree > - ls1088a: Add serdes bindings > > Changes in v2: > - Rename to fsl,lynx-10g.yaml > - Refer to the device in the documentation, rather than the binding > - Move compatible first > - Document phy cells in the description > - Allow a value of 1 for phy-cells. This allows for compatibility with > the similar (but according to Ioana Ciornei different enough) lynx-28g > binding. > - Remove minItems > - Use list for clock-names > - Fix example binding having too many cells in regs > - Add #clock-cells. This will allow using assigned-clocks* to configure > the PLLs. > - Document the structure of the compatible strings > - Convert FMan MAC bindings to yaml > - Better document how we select which PCS to use in the default case > - Rename driver to Lynx 10G (etc.) > - Fix not clearing group->pll after disabling it > - Support 1 and 2 phy-cells > - Power off lanes during probe > - Clear SGMIIaCR1_PCS_EN during probe > - Rename LYNX_PROTO_UNKNOWN to LYNX_PROTO_NONE > - Handle 1000BASE-KX in lynx_proto_mode_prep > - Remove some unused variables > - Fix prototype for dtsec_initialization > - Fix warning if sizeof(void *) != sizeof(resource_size_t) > - Specify type of mac_dev for exception_cb > - Add helper for sanity checking cgr ops > - Add CGR update function > - Adjust queue depth on rate change > - Move PCS_LYNX dependency to fman Kconfig > - Remove unused variable slow_10g_if > - Restrict valid link modes based on the phy interface. This is easier > to set up, and mostly captures what I intended to do the first time. > We now have a custom validate which restricts half-duplex for some SoCs > for RGMII, but generally just uses the default phylink validate. > - Configure the SerDes in enable/disable > - Properly implement all ethtool ops and ioctls. These were mostly > stubbed out just enough to compile last time. > - Convert 10GEC and dTSEC as well > - Fix capitalization of mEMAC in commit messages > - Add nodes for QSGMII PCSs > - Add nodes for QSGMII PCSs > - Use one phy cell for SerDes1, since no lanes can be grouped > - Disable SerDes by default to prevent breaking boards inadvertently. > > Sean Anderson (47): > dt-bindings: phy: Add Lynx 10G phy binding > dt-bindings: net: Expand pcs-handle to an array > dt-bindings: net: Convert FMan MAC bindings to yaml > dt-bindings: net: fman: Add additional interface properties > net: phy: Add 1000BASE-KX interface mode > [RFT] phy: fsl: Add Lynx 10G SerDes driver > net: phy: Add support for rate adaptation > net: phylink: Support differing link speeds and interface speeds > net: phylink: Adjust advertisement based on rate adaptation > net: phylink: Adjust link settings based on rate adaptation > [RFC] net: phylink: Add support for CRS-based rate adaptation > net: phy: aquantia: Add support for AQR115 > net: phy: aquantia: Add some additional phy interfaces > net: phy: aquantia: Add support for rate adaptation > net: fman: Convert to SPDX identifiers > net: fman: Don't pass comm_mode to enable/disable > net: fman: Store en/disable in mac_device instead of mac_priv_s > net: fman: dtsec: Always gracefully stop/start > net: fman: Get PCS node in per-mac init > net: fman: Store initialization function in match data > net: fman: Move struct dev to mac_device > net: fman: Configure fixed link in memac_initialization > net: fman: Export/rename some common functions > net: fman: memac: Use params instead of priv for max_speed > net: fman: Move initialization to mac-specific files > net: fman: Mark mac methods static > net: fman: Inline several functions into initialization > net: fman: Remove internal_phy_node from params > net: fman: Map the base address once > net: fman: Pass params directly to mac init > net: fman: Use mac_dev for some params > net: fman: Specify type of mac_dev for exception_cb > net: fman: Clean up error handling > net: fman: Change return type of disable to void > net: dpaa: Use mac_dev variable in dpaa_netdev_init > soc: fsl: qbman: Add helper for sanity checking cgr ops > soc: fsl: qbman: Add CGR update function > net: dpaa: Adjust queue depth on rate change > net: fman: memac: Add serdes support > net: fman: memac: Use lynx pcs driver > [RFT] net: dpaa: Convert to phylink > powerpc: dts: qoriq: Add nodes for QSGMII PCSs > arm64: dts: layerscape: Add nodes for QSGMII PCSs > arm64: dts: ls1046a: Add serdes bindings > arm64: dts: ls1088a: Add serdes bindings > arm64: dts: ls1046ardb: Add serdes bindings > [WIP] arm64: dts: ls1088ardb: Add serdes bindings > > .../bindings/net/dsa/renesas,rzn1-a5psw.yaml | 1 + > .../bindings/net/ethernet-controller.yaml | 10 +- > .../bindings/net/fsl,fman-dtsec.yaml | 172 +++ > .../bindings/net/fsl,qoriq-mc-dpmac.yaml | 2 +- > .../devicetree/bindings/net/fsl-fman.txt | 133 +- > .../devicetree/bindings/phy/fsl,lynx-10g.yaml | 311 ++++ > Documentation/driver-api/phy/index.rst | 1 + > Documentation/driver-api/phy/lynx_10g.rst | 73 + > MAINTAINERS | 6 + > .../boot/dts/freescale/fsl-ls1043-post.dtsi | 24 + > .../boot/dts/freescale/fsl-ls1046-post.dtsi | 25 + > .../boot/dts/freescale/fsl-ls1046a-rdb.dts | 34 + > .../arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 179 +++ > .../boot/dts/freescale/fsl-ls1088a-rdb.dts | 87 ++ > .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 96 ++ > .../fsl/qoriq-fman3-0-10g-0-best-effort.dtsi | 3 +- > .../boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi | 10 +- > .../fsl/qoriq-fman3-0-10g-1-best-effort.dtsi | 10 +- > .../boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi | 10 +- > .../boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi | 3 +- > .../boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi | 10 +- > .../boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi | 10 +- > .../boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi | 10 +- > .../boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi | 3 +- > .../boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi | 10 +- > .../boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi | 10 +- > .../boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi | 10 +- > .../boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi | 3 +- > .../boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi | 10 +- > .../boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi | 10 +- > .../boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi | 10 +- > .../boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi | 3 +- > .../boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi | 10 +- > drivers/net/ethernet/freescale/dpaa/Kconfig | 4 +- > .../net/ethernet/freescale/dpaa/dpaa_eth.c | 132 +- > .../ethernet/freescale/dpaa/dpaa_eth_sysfs.c | 2 +- > .../ethernet/freescale/dpaa/dpaa_ethtool.c | 90 +- > drivers/net/ethernet/freescale/fman/Kconfig | 4 +- > drivers/net/ethernet/freescale/fman/fman.c | 31 +- > drivers/net/ethernet/freescale/fman/fman.h | 31 +- > .../net/ethernet/freescale/fman/fman_dtsec.c | 674 ++++----- > .../net/ethernet/freescale/fman/fman_dtsec.h | 58 +- > .../net/ethernet/freescale/fman/fman_keygen.c | 29 +- > .../net/ethernet/freescale/fman/fman_keygen.h | 29 +- > .../net/ethernet/freescale/fman/fman_mac.h | 34 +- > .../net/ethernet/freescale/fman/fman_memac.c | 864 +++++------ > .../net/ethernet/freescale/fman/fman_memac.h | 57 +- > .../net/ethernet/freescale/fman/fman_muram.c | 31 +- > .../net/ethernet/freescale/fman/fman_muram.h | 32 +- > .../net/ethernet/freescale/fman/fman_port.c | 29 +- > .../net/ethernet/freescale/fman/fman_port.h | 29 +- > drivers/net/ethernet/freescale/fman/fman_sp.c | 29 +- > drivers/net/ethernet/freescale/fman/fman_sp.h | 28 +- > .../net/ethernet/freescale/fman/fman_tgec.c | 274 ++-- > .../net/ethernet/freescale/fman/fman_tgec.h | 54 +- > drivers/net/ethernet/freescale/fman/mac.c | 653 +-------- > drivers/net/ethernet/freescale/fman/mac.h | 66 +- > drivers/net/phy/aquantia_main.c | 86 +- > drivers/net/phy/phy.c | 21 + > drivers/net/phy/phylink.c | 161 +- > drivers/phy/freescale/Kconfig | 20 + > drivers/phy/freescale/Makefile | 3 + > drivers/phy/freescale/lynx-10g.h | 36 + > drivers/phy/freescale/phy-fsl-lynx-10g-clk.c | 438 ++++++ > drivers/phy/freescale/phy-fsl-lynx-10g.c | 1297 +++++++++++++++++ > drivers/soc/fsl/qbman/qman.c | 76 +- > include/linux/phy.h | 42 + > include/linux/phylink.h | 12 +- > include/soc/fsl/qman.h | 9 + > 69 files changed, 4408 insertions(+), 2356 deletions(-) > create mode 100644 Documentation/devicetree/bindings/net/fsl,fman- > dtsec.yaml > create mode 100644 Documentation/devicetree/bindings/phy/fsl,lynx- > 10g.yaml > create mode 100644 Documentation/driver-api/phy/lynx_10g.rst > create mode 100644 drivers/phy/freescale/lynx-10g.h > create mode 100644 drivers/phy/freescale/phy-fsl-lynx-10g-clk.c > create mode 100644 drivers/phy/freescale/phy-fsl-lynx-10g.c > > -- > 2.35.1.1320.gc452695387.dirty
On 7/21/22 10:26 AM, Camelia Alexandra Groza wrote: >> -----Original Message----- >> From: Sean Anderson <sean.anderson@seco.com> >> Sent: Saturday, July 16, 2022 0:59 >> To: David S . Miller <davem@davemloft.net>; Jakub Kicinski >> <kuba@kernel.org>; Madalin Bucur <madalin.bucur@nxp.com>; >> netdev@vger.kernel.org >> Cc: Paolo Abeni <pabeni@redhat.com>; Eric Dumazet >> <edumazet@google.com>; linux-arm-kernel@lists.infradead.org; Russell >> King <linux@armlinux.org.uk>; linux-kernel@vger.kernel.org; Sean Anderson >> <sean.anderson@seco.com>; Alexandru Marginean >> <alexandru.marginean@nxp.com>; Andrew Lunn <andrew@lunn.ch>; >> Benjamin Herrenschmidt <benh@kernel.crashing.org>; Heiner Kallweit >> <hkallweit1@gmail.com>; Ioana Ciornei <ioana.ciornei@nxp.com>; Jonathan >> Corbet <corbet@lwn.net>; Kishon Vijay Abraham I <kishon@ti.com>; >> Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>; Leo Li >> <leoyang.li@nxp.com>; Michael Ellerman <mpe@ellerman.id.au>; Paul >> Mackerras <paulus@samba.org>; Rob Herring <robh+dt@kernel.org>; >> Shawn Guo <shawnguo@kernel.org>; Vinod Koul <vkoul@kernel.org>; >> Vladimir Oltean <olteanv@gmail.com>; devicetree@vger.kernel.org; linux- >> doc@vger.kernel.org; linux-phy@lists.infradead.org; linuxppc- >> dev@lists.ozlabs.org >> Subject: [PATCH net-next v3 00/47] [RFT] net: dpaa: Convert to phylink >> >> This series converts the DPAA driver to phylink. Additionally, >> it also adds a serdes driver to allow for dynamic reconfiguration >> between 1g and 10g interfaces (such as in an SFP+ slot). These changes >> are submitted together for this RFT, but they will eventually be >> submitted separately to the appropriate subsystem maintainers. >> >> I have tried to maintain backwards compatibility with existing device >> trees whereever possible. However, one area where I was unable to >> achieve this was with QSGMII. Please refer to patch 4 for details. >> >> All mac drivers have now been converted. I would greatly appreciate if >> anyone has QorIQ boards they can test/debug this series on. I only have an >> LS1046ARDB. Everything but QSGMII should work without breakage; QSGMII >> needs patches 42 and 43. >> >> The serdes driver is mostly functional (except for XFI). This series >> only adds support for the LS1046ARDB SerDes (and untested LS1088ARDB), >> but it should be fairly straightforward to add support for other SoCs >> and boards (see Documentation/driver-api/phy/qoriq.rst). >> >> This is the last spin of this series with all patches included. After next >> week (depending on feedback) I will resend the patches broken up as >> follows: >> - 5: 1000BASE-KX support >> - 1, 6, 44, 45: Lynx 10G support >> - 7-10, 12-14: Phy rate adaptation support >> - 2-4, 15-43, 46, 47: DPAA phylink conversion > > Please also send patches 15-38 separately from the DPAA1 SerDes and phylink set for easier review OK. --Sean >> Patches 15-19 were first submitted as [1]. >> >> [1] https://lore.kernel.org/netdev/20220531195851.1592220-1-sean.anderson@seco.com/ >> >> Changes in v3: >> - Manually expand yaml references >> - Add mode configuration to device tree >> - Expand pcs-handle to an array >> - Incorperate some minor changes into the first FMan binding commit >> - Add vendor prefix 'fsl,' to rgmii and mii properties. >> - Set maxItems for pcs-names >> - Remove phy-* properties from example because dt-schema complains and >> I >> can't be bothered to figure out how to make it work. >> - Add pcs-handle as a preferred version of pcsphy-handle >> - Deprecate pcsphy-handle >> - Remove mii/rmii properties >> - Add 1000BASE-KX interface mode >> - Rename remaining references to QorIQ SerDes to Lynx 10G >> - Fix PLL enable sequence by waiting for our reset request to be cleared >> before continuing. Do the same for the lock, even though it isn't as >> critical. Because we will delay for 1.5ms on average, use prepare >> instead of enable so we can sleep. >> - Document the status of each protocol >> - Fix offset of several bitfields in RECR0 >> - Take into account PLLRST_B, SDRST_B, and SDEN when considering whether >> a PLL is "enabled." >> - Only power off unused lanes. >> - Split mode lane mask into first/last lane (like group) >> - Read modes from device tree >> - Use caps to determine whether KX/KR are supported >> - Move modes to lynx_priv >> - Ensure that the protocol controller is not already in-use when we try >> to configure a new mode. This should only occur if the device tree is >> misconfigured (e.g. when QSGMII is selected on two lanes but there is >> only one QSGMII controller). >> - Split PLL drivers off into their own file >> - Add clock for "ext_dly" instead of writing the bit directly (and >> racing with any clock code). >> - Use kasprintf instead of open-coding the snprintf dance >> - Support 1000BASE-KX in lynx_lookup_proto. This still requires PCS >> support, so nothing is truly "enabled" yet. >> - Add support for phy rate adaptation >> - Support differing link speeds and interface speeds >> - Adjust advertisement based on rate adaptation >> - Adjust link settings based on rate adaptation >> - Add support for CRS-based rate adaptation >> - Add support for AQR115 >> - Add some additional phy interfaces >> - Add support for aquantia rate adaptation >> - Put the PCS mdiodev only after we are done with it (since the PCS >> does not perform a get itself). >> - Remove _return label from memac_initialization in favor of returning >> directly >> - Fix grabbing the default PCS not checking for -ENODATA from >> of_property_match_string >> - Set DTSEC_ECNTRL_R100M in dtsec_link_up instead of dtsec_mac_config >> - Remove rmii/mii properties >> - Replace 1000Base... with 1000BASE... to match IEEE capitalization >> - Add compatibles for QSGMII PCSs >> - Split arm and powerpcs dts updates >> - Describe modes in device tree >> - ls1088a: Add serdes bindings >> >> Changes in v2: >> - Rename to fsl,lynx-10g.yaml >> - Refer to the device in the documentation, rather than the binding >> - Move compatible first >> - Document phy cells in the description >> - Allow a value of 1 for phy-cells. This allows for compatibility with >> the similar (but according to Ioana Ciornei different enough) lynx-28g >> binding. >> - Remove minItems >> - Use list for clock-names >> - Fix example binding having too many cells in regs >> - Add #clock-cells. This will allow using assigned-clocks* to configure >> the PLLs. >> - Document the structure of the compatible strings >> - Convert FMan MAC bindings to yaml >> - Better document how we select which PCS to use in the default case >> - Rename driver to Lynx 10G (etc.) >> - Fix not clearing group->pll after disabling it >> - Support 1 and 2 phy-cells >> - Power off lanes during probe >> - Clear SGMIIaCR1_PCS_EN during probe >> - Rename LYNX_PROTO_UNKNOWN to LYNX_PROTO_NONE >> - Handle 1000BASE-KX in lynx_proto_mode_prep >> - Remove some unused variables >> - Fix prototype for dtsec_initialization >> - Fix warning if sizeof(void *) != sizeof(resource_size_t) >> - Specify type of mac_dev for exception_cb >> - Add helper for sanity checking cgr ops >> - Add CGR update function >> - Adjust queue depth on rate change >> - Move PCS_LYNX dependency to fman Kconfig >> - Remove unused variable slow_10g_if >> - Restrict valid link modes based on the phy interface. This is easier >> to set up, and mostly captures what I intended to do the first time. >> We now have a custom validate which restricts half-duplex for some SoCs >> for RGMII, but generally just uses the default phylink validate. >> - Configure the SerDes in enable/disable >> - Properly implement all ethtool ops and ioctls. These were mostly >> stubbed out just enough to compile last time. >> - Convert 10GEC and dTSEC as well >> - Fix capitalization of mEMAC in commit messages >> - Add nodes for QSGMII PCSs >> - Add nodes for QSGMII PCSs >> - Use one phy cell for SerDes1, since no lanes can be grouped >> - Disable SerDes by default to prevent breaking boards inadvertently. >> >> Sean Anderson (47): >> dt-bindings: phy: Add Lynx 10G phy binding >> dt-bindings: net: Expand pcs-handle to an array >> dt-bindings: net: Convert FMan MAC bindings to yaml >> dt-bindings: net: fman: Add additional interface properties >> net: phy: Add 1000BASE-KX interface mode >> [RFT] phy: fsl: Add Lynx 10G SerDes driver >> net: phy: Add support for rate adaptation >> net: phylink: Support differing link speeds and interface speeds >> net: phylink: Adjust advertisement based on rate adaptation >> net: phylink: Adjust link settings based on rate adaptation >> [RFC] net: phylink: Add support for CRS-based rate adaptation >> net: phy: aquantia: Add support for AQR115 >> net: phy: aquantia: Add some additional phy interfaces >> net: phy: aquantia: Add support for rate adaptation >> net: fman: Convert to SPDX identifiers >> net: fman: Don't pass comm_mode to enable/disable >> net: fman: Store en/disable in mac_device instead of mac_priv_s >> net: fman: dtsec: Always gracefully stop/start >> net: fman: Get PCS node in per-mac init >> net: fman: Store initialization function in match data >> net: fman: Move struct dev to mac_device >> net: fman: Configure fixed link in memac_initialization >> net: fman: Export/rename some common functions >> net: fman: memac: Use params instead of priv for max_speed >> net: fman: Move initialization to mac-specific files >> net: fman: Mark mac methods static >> net: fman: Inline several functions into initialization >> net: fman: Remove internal_phy_node from params >> net: fman: Map the base address once >> net: fman: Pass params directly to mac init >> net: fman: Use mac_dev for some params >> net: fman: Specify type of mac_dev for exception_cb >> net: fman: Clean up error handling >> net: fman: Change return type of disable to void >> net: dpaa: Use mac_dev variable in dpaa_netdev_init >> soc: fsl: qbman: Add helper for sanity checking cgr ops >> soc: fsl: qbman: Add CGR update function >> net: dpaa: Adjust queue depth on rate change >> net: fman: memac: Add serdes support >> net: fman: memac: Use lynx pcs driver >> [RFT] net: dpaa: Convert to phylink >> powerpc: dts: qoriq: Add nodes for QSGMII PCSs >> arm64: dts: layerscape: Add nodes for QSGMII PCSs >> arm64: dts: ls1046a: Add serdes bindings >> arm64: dts: ls1088a: Add serdes bindings >> arm64: dts: ls1046ardb: Add serdes bindings >> [WIP] arm64: dts: ls1088ardb: Add serdes bindings >> >> .../bindings/net/dsa/renesas,rzn1-a5psw.yaml | 1 + >> .../bindings/net/ethernet-controller.yaml | 10 +- >> .../bindings/net/fsl,fman-dtsec.yaml | 172 +++ >> .../bindings/net/fsl,qoriq-mc-dpmac.yaml | 2 +- >> .../devicetree/bindings/net/fsl-fman.txt | 133 +- >> .../devicetree/bindings/phy/fsl,lynx-10g.yaml | 311 ++++ >> Documentation/driver-api/phy/index.rst | 1 + >> Documentation/driver-api/phy/lynx_10g.rst | 73 + >> MAINTAINERS | 6 + >> .../boot/dts/freescale/fsl-ls1043-post.dtsi | 24 + >> .../boot/dts/freescale/fsl-ls1046-post.dtsi | 25 + >> .../boot/dts/freescale/fsl-ls1046a-rdb.dts | 34 + >> .../arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 179 +++ >> .../boot/dts/freescale/fsl-ls1088a-rdb.dts | 87 ++ >> .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 96 ++ >> .../fsl/qoriq-fman3-0-10g-0-best-effort.dtsi | 3 +- >> .../boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi | 10 +- >> .../fsl/qoriq-fman3-0-10g-1-best-effort.dtsi | 10 +- >> .../boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi | 10 +- >> .../boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi | 3 +- >> .../boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi | 10 +- >> .../boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi | 10 +- >> .../boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi | 10 +- >> .../boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi | 3 +- >> .../boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi | 10 +- >> .../boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi | 10 +- >> .../boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi | 10 +- >> .../boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi | 3 +- >> .../boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi | 10 +- >> .../boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi | 10 +- >> .../boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi | 10 +- >> .../boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi | 3 +- >> .../boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi | 10 +- >> drivers/net/ethernet/freescale/dpaa/Kconfig | 4 +- >> .../net/ethernet/freescale/dpaa/dpaa_eth.c | 132 +- >> .../ethernet/freescale/dpaa/dpaa_eth_sysfs.c | 2 +- >> .../ethernet/freescale/dpaa/dpaa_ethtool.c | 90 +- >> drivers/net/ethernet/freescale/fman/Kconfig | 4 +- >> drivers/net/ethernet/freescale/fman/fman.c | 31 +- >> drivers/net/ethernet/freescale/fman/fman.h | 31 +- >> .../net/ethernet/freescale/fman/fman_dtsec.c | 674 ++++----- >> .../net/ethernet/freescale/fman/fman_dtsec.h | 58 +- >> .../net/ethernet/freescale/fman/fman_keygen.c | 29 +- >> .../net/ethernet/freescale/fman/fman_keygen.h | 29 +- >> .../net/ethernet/freescale/fman/fman_mac.h | 34 +- >> .../net/ethernet/freescale/fman/fman_memac.c | 864 +++++------ >> .../net/ethernet/freescale/fman/fman_memac.h | 57 +- >> .../net/ethernet/freescale/fman/fman_muram.c | 31 +- >> .../net/ethernet/freescale/fman/fman_muram.h | 32 +- >> .../net/ethernet/freescale/fman/fman_port.c | 29 +- >> .../net/ethernet/freescale/fman/fman_port.h | 29 +- >> drivers/net/ethernet/freescale/fman/fman_sp.c | 29 +- >> drivers/net/ethernet/freescale/fman/fman_sp.h | 28 +- >> .../net/ethernet/freescale/fman/fman_tgec.c | 274 ++-- >> .../net/ethernet/freescale/fman/fman_tgec.h | 54 +- >> drivers/net/ethernet/freescale/fman/mac.c | 653 +-------- >> drivers/net/ethernet/freescale/fman/mac.h | 66 +- >> drivers/net/phy/aquantia_main.c | 86 +- >> drivers/net/phy/phy.c | 21 + >> drivers/net/phy/phylink.c | 161 +- >> drivers/phy/freescale/Kconfig | 20 + >> drivers/phy/freescale/Makefile | 3 + >> drivers/phy/freescale/lynx-10g.h | 36 + >> drivers/phy/freescale/phy-fsl-lynx-10g-clk.c | 438 ++++++ >> drivers/phy/freescale/phy-fsl-lynx-10g.c | 1297 +++++++++++++++++ >> drivers/soc/fsl/qbman/qman.c | 76 +- >> include/linux/phy.h | 42 + >> include/linux/phylink.h | 12 +- >> include/soc/fsl/qman.h | 9 + >> 69 files changed, 4408 insertions(+), 2356 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/net/fsl,fman- >> dtsec.yaml >> create mode 100644 Documentation/devicetree/bindings/phy/fsl,lynx- >> 10g.yaml >> create mode 100644 Documentation/driver-api/phy/lynx_10g.rst >> create mode 100644 drivers/phy/freescale/lynx-10g.h >> create mode 100644 drivers/phy/freescale/phy-fsl-lynx-10g-clk.c >> create mode 100644 drivers/phy/freescale/phy-fsl-lynx-10g.c >> >> -- >> 2.35.1.1320.gc452695387.dirty >