mbox series

[net-next,v2,00/13] net: dsa: microchip: add PTP support for KSZ9563/KSZ8563 and LAN937x

Message ID 20221206091428.28285-1-arun.ramadoss@microchip.com (mailing list archive)
Headers show
Series net: dsa: microchip: add PTP support for KSZ9563/KSZ8563 and LAN937x | expand

Message

Arun Ramadoss Dec. 6, 2022, 9:14 a.m. UTC
KSZ9563/KSZ8563 and  LAN937x switch are capable for supporting IEEE 1588 PTP
protocol.  LAN937x has the same PTP register set similar to KSZ9563, hence the
implementation has been made common for the KSZ switches.  KSZ9563 does not
support two step timestamping but LAN937x supports both.  Tested the 1step &
2step p2p timestamping in LAN937x and p2p1step timestamping in KSZ9563.

This patch series is based on the Christian Eggers PTP support for KSZ9563.
Applied the Christian patch and updated as per the latest refactoring of KSZ
series code. The features added on top are PTP packet Interrupt
implementation based on nested handler, LAN937x two step timestamping and
programmable per_out pins.

Link: https://www.spinics.net/lists/netdev/msg705531.html

Patch v1 -> v2
- GPIO perout enable bit is different for LAN937x and KSZ9x. Added new patch
for configuring LAN937x programmable pins.
- PTP enabled in hardware based on both tx and rx timestamping of all the user
ports.
- Replaced setting of 802.1AS bit with P2P bit in PTP_MSG_CONF1 register.

RFC v2 -> Patch v1
- Changed the patch author based on past patch submission
- Changed the commit message prefix as net: dsa: microchip: ptp
Individual patch changes are listed in correspondig commits.

RFC v1 -> v2
- Added the p2p1step timestamping and conditional execution of 2 step for
  LAN937x only.
- Added the periodic output support

Arun Ramadoss (5):
  net: dsa: microchip: ptp: add 4 bytes in tail tag when ptp enabled
  net: dsa: microchip: ptp: enable interrupt for timestamping
  net: dsa: microchip: ptp: add support for perout programmable pins
  net: dsa: microchip: ptp: lan937x: add 2 step timestamping
  net: dsa: microchip: ptp: lan937x: Enable periodic output in LED pins

Christian Eggers (8):
  net: dsa: microchip: ptp: add the posix clock support
  net: dsa: microchip: ptp: Initial hardware time stamping support
  net: dsa: microchip: ptp: manipulating absolute time using ptp hw
    clock
  net: ptp: add helper for one-step P2P clocks
  net: dsa: microchip: ptp: add packet reception timestamping
  net: dsa: microchip: ptp: add packet transmission timestamping
  net: dsa: microchip: ptp: move pdelay_rsp correction field to tail tag
  net: dsa: microchip: ptp: add periodic output signal

 MAINTAINERS                             |    1 +
 drivers/net/dsa/microchip/Kconfig       |   11 +
 drivers/net/dsa/microchip/Makefile      |    5 +
 drivers/net/dsa/microchip/ksz_common.c  |   45 +-
 drivers/net/dsa/microchip/ksz_common.h  |   48 +
 drivers/net/dsa/microchip/ksz_ptp.c     | 1157 +++++++++++++++++++++++
 drivers/net/dsa/microchip/ksz_ptp.h     |   88 ++
 drivers/net/dsa/microchip/ksz_ptp_reg.h |  142 +++
 include/linux/dsa/ksz_common.h          |   54 ++
 include/linux/ptp_classify.h            |   71 ++
 net/dsa/tag_ksz.c                       |  271 +++++-
 11 files changed, 1875 insertions(+), 18 deletions(-)
 create mode 100644 drivers/net/dsa/microchip/ksz_ptp.c
 create mode 100644 drivers/net/dsa/microchip/ksz_ptp.h
 create mode 100644 drivers/net/dsa/microchip/ksz_ptp_reg.h
 create mode 100644 include/linux/dsa/ksz_common.h


base-commit: c9f8d73645b6f76c8d14f49bc860f7143d001cb7