mbox series

[V6,net-next,0/4] Support some features for the HNS3 ethernet driver

Message ID 20240327114330.1826631-1-shaojijie@huawei.com (mailing list archive)
Headers show
Series Support some features for the HNS3 ethernet driver | expand

Message

Jijie Shao March 27, 2024, 11:43 a.m. UTC 
Currently, the hns3 driver does not have the trace
of the command queue. As a result, it is difficult to
locate the communication between the driver and firmware.
Therefore, the trace function of the command queue is
added in this patch set to facilitate the locating of
communication problems between the driver and firmware.

If a RAS occurs, the driver will automatically reset to attempt
to recover the RAS. Therefore, to locate the cause of the RAS,
it is necessary to save the values of some RAS-related registers
before the reset. So we added a patch in this patch set to
print these information.

---
changeLog:
v5 -> v6:
  - Delete the redundant operation of adding '\0' after scnprintf,
    suggested by Ratheesh Kannoth
  v5: https://lore.kernel.org/all/20240309100044.2351166-1-shaojijie@huawei.com/
v4 -> v5:
  - Delete a patch about dump pfc frame statistics in tx timeout log by dmesg,
    suggested by Jiri Pirko
  - Rewrite the log message of patch about command queue trace, suggested by Jiri Pirko
  - Add a new patch about querying scc version by devlink info
  v4: https://lore.kernel.org/all/20240105010119.2619873-1-shaojijie@huawei.com/
v3 -> v4:
  - Adjuste the patches sequence in this patch set, suggested by Simon Horman
  v3: https://lore.kernel.org/all/20231216070018.222798-1-shaojijie@huawei.com/
v2 -> v3:
  - Fix the incorrect use of byte order in patch
    "net: hns3: add command queue trace for hns3" suggested by Simon Horman
  - Add a new patch to move constants from hclge_debugfs.h
    to hclge_debugfs.c suggested by Simon Horman
  v2: https://lore.kernel.org/all/20231214141135.613485-1-shaojijie@huawei.com/
v1 -> v2:
  - Delete a patch for ethtool -S to dump page pool statistics, suggested by Jakub Kicinski
  - Delete two patches about CMIS transceiver modules because
    ethtool get_module_eeprom_by_page op is not implemented, suggested by Jakub Kicinski
  v1: https://lore.kernel.org/all/20231211020816.69434-1-shaojijie@huawei.com/
---


Hao Chen (1):
  net: hns3: add support to query scc version by devlink info

Hao Lan (1):
  net: hns3: add command queue trace for hns3

Jijie Shao (1):
  net: hns3: move constants from hclge_debugfs.h to hclge_debugfs.c

Peiyang Wang (1):
  net: hns3: dump more reg info based on ras mod

 drivers/net/ethernet/hisilicon/hns3/hnae3.h   |  13 +
 .../hns3/hns3_common/hclge_comm_cmd.c         |  19 +
 .../hns3/hns3_common/hclge_comm_cmd.h         |  24 +-
 .../hisilicon/hns3/hns3pf/hclge_debugfs.c     | 646 +++++++++++++++++-
 .../hisilicon/hns3/hns3pf/hclge_debugfs.h     | 643 +----------------
 .../hisilicon/hns3/hns3pf/hclge_devlink.c     |  44 +-
 .../hisilicon/hns3/hns3pf/hclge_devlink.h     |   2 +
 .../hisilicon/hns3/hns3pf/hclge_err.c         | 433 +++++++++++-
 .../hisilicon/hns3/hns3pf/hclge_err.h         |  36 +
 .../hisilicon/hns3/hns3pf/hclge_main.c        |  63 ++
 .../hisilicon/hns3/hns3pf/hclge_main.h        |   1 +
 .../hisilicon/hns3/hns3pf/hclge_trace.h       |  94 +++
 .../hisilicon/hns3/hns3vf/hclgevf_main.c      |  40 ++
 .../hisilicon/hns3/hns3vf/hclgevf_trace.h     |  50 ++
 14 files changed, 1456 insertions(+), 652 deletions(-)