| Message ID | 20240712175520.7013-1-gakula@marvell.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Introduce RVU representors | expand |
On Fri, 12 Jul 2024 23:25:09 +0530 Geetha sowjanya wrote: > This series adds representor support for each rvu devices. > When switchdev mode is enabled, representor netdev is registered > for each rvu device. In implementation of representor model, > one NIX HW LF with multiple SQ and RQ is reserved, where each > RQ and SQ of the LF are mapped to a representor. A loopback channel > is reserved to support packet path between representors and VFs. > CN10K silicon supports 2 types of MACs, RPM and SDP. This > patch set adds representor support for both RPM and SDP MAC Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst:420: WARNING: Literal block expected; none found.
This series adds representor support for each rvu devices. When switchdev mode is enabled, representor netdev is registered for each rvu device. In implementation of representor model, one NIX HW LF with multiple SQ and RQ is reserved, where each RQ and SQ of the LF are mapped to a representor. A loopback channel is reserved to support packet path between representors and VFs. CN10K silicon supports 2 types of MACs, RPM and SDP. This patch set adds representor support for both RPM and SDP MAC interfaces. - Patch 1: Refactors and exports the shared service functions. - Patch 2: Implements basic representor driver. - Patch 3: Add devlink support to create representor netdevs that can be used to manage VFs. - Patch 4: Implements basec netdev_ndo_ops. - Patch 5: Installs tcam rules to route packets between representor and VFs. - Patch 6: Enables fetching VF stats via representor interface - Patch 7: Adds support to sync link state between representors and VFs . - Patch 8: Enables configuring VF MTU via representor netdevs. - Patch 9: Add representors for sdp MAC. - Patch 10: Add devlink port support. Command to create PF/VF representor #devlink dev eswitch set pci/0002:1c:00.0 mode switchdev VF representors are created for each VF when switch mode is set switchdev on representor PCI device #devlink dev pci/0002:01:00.0 pci/0002:02:00.0 pci/0002:1c:00.0 #devlink dev eswitch set pci/0002:1c:00.0 mode switchdev # ip link show eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 7e:58:2d:b6:97:51 brd ff:ff:ff:ff:ff:ff r0p1v0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 7e:5a:66:ea:fe:d6 brd ff:ff:ff:ff:ff:ff r1p1v1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether de:29:be:10:9e:bf brd ff:ff:ff:ff:ff:ff r2p1v2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 4a:12:c7:a2:66:ad brd ff:ff:ff:ff:ff:ff r3p1v3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether c2:b8:a8:0e:73:fd brd ff:ff:ff:ff:ff:ff ~# devlink port pci/0002:1c:00.0/0: type eth netdev r0p1v0 flavour pcipf controller 0 pfnum 1 vfnum 0 external false splittable false pci/0002:1c:00.0/1: type eth netdev r1p1v1 flavour pcivf controller 0 pfnum 1 vfnum 1 external false splittable false pci/0002:1c:00.0/2: type eth netdev r2p1v2 flavour pcivf controller 0 pfnum 1 vfnum 2 external false splittable false pci/0002:1c:00.0/3: type eth netdev r3p1v3 flavour pcivf controller 0 pfnum 1 vfnum 3 external false splittable false ----------- v1-v2: -Fixed build warnings. -Address review comments provided by "Kalesh Anakkur Purayil". v2-v3: - Used extack for error messages. - As suggested reworked commit messages. - Fixed sparse warning. v3-v4: - Patch 2 & 3: Fixed coccinelle reported warnings. - Patch 10: Added devlink port support. v4-v5: - Patch 3: Removed devm_* usage in rvu_rep_create() - Patch 3: Fixed build warnings. v5-v6: - Addressed review comments provided by "Simon Horman". - Added review tag. v6-v7: - Rebased on top net-next branch. v7-v8: - Implmented offload stats ndo. - Added documentation. v8-v9: - Updated the documentation. Geetha sowjanya (11): octeontx2-pf: Refactoring RVU driver octeontx2-pf: RVU representor driver octeontx2-pf: Create representor netdev octeontx2-pf: Add basic net_device_ops octeontx2-af: Add packet path between representor and VF octeontx2-pf: Get VF stats via representor octeontx2-pf: Add support to sync link state between representor and VFs octeontx2-pf: Configure VF mtu via representor octeontx2-pf: Add representors for sdp MAC octeontx2-pf: Add devlink port support octeontx2-pf: Implement offload stats ndo for representors .../ethernet/marvell/octeontx2.rst | 85 ++ .../net/ethernet/marvell/octeontx2/Kconfig | 8 + .../ethernet/marvell/octeontx2/af/Makefile | 3 +- .../ethernet/marvell/octeontx2/af/common.h | 2 + .../net/ethernet/marvell/octeontx2/af/mbox.h | 74 ++ .../net/ethernet/marvell/octeontx2/af/npc.h | 1 + .../net/ethernet/marvell/octeontx2/af/rvu.c | 11 + .../net/ethernet/marvell/octeontx2/af/rvu.h | 30 +- .../marvell/octeontx2/af/rvu_debugfs.c | 27 - .../marvell/octeontx2/af/rvu_devlink.c | 6 + .../ethernet/marvell/octeontx2/af/rvu_nix.c | 81 +- .../marvell/octeontx2/af/rvu_npc_fs.c | 5 + .../ethernet/marvell/octeontx2/af/rvu_reg.h | 4 + .../ethernet/marvell/octeontx2/af/rvu_rep.c | 464 +++++++++++ .../marvell/octeontx2/af/rvu_struct.h | 26 + .../marvell/octeontx2/af/rvu_switch.c | 20 +- .../ethernet/marvell/octeontx2/nic/Makefile | 2 + .../ethernet/marvell/octeontx2/nic/cn10k.c | 4 +- .../ethernet/marvell/octeontx2/nic/cn10k.h | 2 +- .../marvell/octeontx2/nic/otx2_common.c | 58 +- .../marvell/octeontx2/nic/otx2_common.h | 84 +- .../marvell/octeontx2/nic/otx2_devlink.c | 49 ++ .../ethernet/marvell/octeontx2/nic/otx2_pf.c | 305 +++++--- .../marvell/octeontx2/nic/otx2_txrx.c | 38 +- .../marvell/octeontx2/nic/otx2_txrx.h | 3 +- .../ethernet/marvell/octeontx2/nic/otx2_vf.c | 19 +- .../net/ethernet/marvell/octeontx2/nic/rep.c | 725 ++++++++++++++++++ .../net/ethernet/marvell/octeontx2/nic/rep.h | 53 ++ 28 files changed, 1962 insertions(+), 227 deletions(-) create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/rvu_rep.c create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/rep.c create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/rep.h