mbox series

[RFC,V2,net-next,00/11] Add support of HIBMCGE Ethernet Driver

Message ID 20240813135640.1694993-1-shaojijie@huawei.com (mailing list archive)
Headers show
Series Add support of HIBMCGE Ethernet Driver | expand

Message

Jijie Shao Aug. 13, 2024, 1:56 p.m. UTC
This patch set adds the support of Hisilicon BMC Gigabit Ethernet Driver.

This patch set includes basic Rx/Tx functionality. It also includes
the registration and interrupt codes.

This work provides the initial support to the HIBMCGE and
would incrementally add features or enhancements.

---
ChangeLog:
v1 -> v2:
  - Replace linkmode_copy() with phy_remove_link_mode() to
    simplify the PHY configuration process, suggested by Andrew.
  - Delete hbg_get_link_status() from the scheduled task, suggested by Andrew.
  - Delete validation for mtu in hbg_net_change_mtu(), suggested by Andrew.
  - Delete validation for mac address in hbg_net_set_mac_address(),
    suggested by Andrew.
  - Use napi_complete_done() to simplify the process, suggested by Joe Damato.
  - Use ethtool_op_get_link(), phy_ethtool_get_link_ksettings(),
    and phy_ethtool_set_link_ksettings() to simplify the code, suggested by Andrew.
  - Add the null pointer check on the return value of pcim_iomap_table(),
    suggested by Jonathan.
  - Add the check on the return value of phy_connect_direct(),
    suggested by Jonathan.
  - Adjusted the layout to place the fields and register definitions
    in one place, suggested by Jonathan.
  - Replace request_irq with devm_request_irq, suggested by Jonathan.
  - Replace BIT_MASK() with BIT(), suggested by Jonathan.
  - Introduce irq_handle in struct hbg_irq_info in advance to reduce code changes,
    suggested by Jonathan.
  - Delete workqueue for this patch set, suggested by Jonathan.
  - Support to compile this driver on all arch in Kconfig,
    suggested by Andrew and Jonathan.
  - Add a patch to add is_valid_ether_addr check in dev_set_mac_address,
    suggested by Andrew.
  - Use macro instead of inline to fix the warning about compile-time constant
    in FIELD_PREP(), reported by Simon Horman.
  - A few other minor changes.
  v1: https://lore.kernel.org/all/20240731094245.1967834-1-shaojijie@huawei.com/
---

Jijie Shao (11):
  net: hibmcge: Add pci table supported in this module
  net: hibmcge: Add read/write registers supported through the bar space
  net: hibmcge: Add mdio and hardware configuration supported in this
    module
  net: hibmcge: Add interrupt supported in this module
  net: hibmcge: Implement some .ndo functions
  net: hibmcge: Implement .ndo_start_xmit function
  net: hibmcge: Implement rx_poll function to receive packets
  net: hibmcge: Implement some ethtool_ops functions
  net: hibmcge: Add a Makefile and update Kconfig for hibmcge
  net: hibmcge: Add maintainer for hibmcge
  net: add is_valid_ether_addr check in dev_set_mac_address

 MAINTAINERS                                   |   7 +
 drivers/net/ethernet/hisilicon/Kconfig        |  16 +-
 drivers/net/ethernet/hisilicon/Makefile       |   1 +
 .../net/ethernet/hisilicon/hibmcge/Makefile   |  10 +
 .../ethernet/hisilicon/hibmcge/hbg_common.h   | 142 ++++++
 .../ethernet/hisilicon/hibmcge/hbg_ethtool.c  |  17 +
 .../ethernet/hisilicon/hibmcge/hbg_ethtool.h  |  11 +
 .../net/ethernet/hisilicon/hibmcge/hbg_hw.c   | 299 +++++++++++++
 .../net/ethernet/hisilicon/hibmcge/hbg_hw.h   |  48 ++
 .../net/ethernet/hisilicon/hibmcge/hbg_irq.c  | 180 ++++++++
 .../net/ethernet/hisilicon/hibmcge/hbg_irq.h  |  13 +
 .../net/ethernet/hisilicon/hibmcge/hbg_main.c | 245 +++++++++++
 .../net/ethernet/hisilicon/hibmcge/hbg_mdio.c | 253 +++++++++++
 .../net/ethernet/hisilicon/hibmcge/hbg_mdio.h |  13 +
 .../net/ethernet/hisilicon/hibmcge/hbg_reg.h  | 109 +++++
 .../hisilicon/hibmcge/hbg_reg_union.h         | 266 +++++++++++
 .../net/ethernet/hisilicon/hibmcge/hbg_txrx.c | 414 ++++++++++++++++++
 .../net/ethernet/hisilicon/hibmcge/hbg_txrx.h |  37 ++
 net/core/dev.c                                |   2 +
 19 files changed, 2082 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/Makefile
 create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_common.h
 create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_ethtool.c
 create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_ethtool.h
 create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_hw.c
 create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_hw.h
 create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_irq.c
 create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_irq.h
 create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_main.c
 create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_mdio.c
 create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_mdio.h
 create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_reg.h
 create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_reg_union.h
 create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_txrx.c
 create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_txrx.h