[net-next,v6,0/4] Support PTP clock for Wangxun NICs

Message

Jiawen Wu Feb. 8, 2025, 3:13 a.m. UTC

Implement support for PTP clock on Wangxun NICs.

Changes in v6:
- Link to v5: https://lore.kernel.org/all/[e-mail]/
- Add "depends on PTP_1588_CLOCK_OPTIONAL" in Kconfig to fix build
  errors

Changes in v5:
- Link to v4: https://lore.kernel.org/all/[e-mail]/
- Use reading template for timecounter_cyc2time()
- Move the same piece of codes to the functions
- Fix read sequence for time registers
- Remove skb_shared_hwtstamps zero out
- Pass duty cycle for the pulse width

Changes in v4:
- Link to v3: https://lore.kernel.org/all/[e-mail]/
- Add tx_hwtstamp_errors to record errors of DMA mapping
- Remove flag bits clear for default case in setting TS mode
- Change to use seqlock_t hw_tc_lock
- Add ptp_schedule_worker in wx_ptp_reset()
- Remove perout index check
- Refactor the same code into a function

Changes in v3:
- Link to v2: https://lore.kernel.org/all/[e-mail]/
- Clean up messy patches
- Return delay value in wx_ptp_do_aux_work()
- Remove dev_warn()
- Implement ethtool get_ts_stats
- Support PTP_CLK_REQ_PEROUT instead of PTP_CLK_REQ_PPS
- Change to start polling Tx timestamp once descriptor done bit is set

Changes in v2:
- Link to v1: https://lore.kernel.org/all/[e-mail]/
- Fix build warning
- Convert to .ndo_hwtstamp_get and .ndo_hwtstamp_set
- Remove needless timestamp flags
- Use .do_aux_work instead of driver service task
- Use the better error code
- Rename function wx_ptp_start_cyclecounter()
- Keep the register names consistent between comments and code

Jiawen Wu (4):
  net: wangxun: Add support for PTP clock
  net: wangxun: Support to get ts info
  net: wangxun: Implement do_aux_work of ptp_clock_info
  net: ngbe: Add support for 1PPS and TOD

 drivers/net/ethernet/wangxun/Kconfig          |    1 +
 drivers/net/ethernet/wangxun/libwx/Makefile   |    2 +-
 .../net/ethernet/wangxun/libwx/wx_ethtool.c   |   53 +
 .../net/ethernet/wangxun/libwx/wx_ethtool.h   |    4 +
 drivers/net/ethernet/wangxun/libwx/wx_hw.c    |   19 +
 drivers/net/ethernet/wangxun/libwx/wx_hw.h    |    1 +
 drivers/net/ethernet/wangxun/libwx/wx_lib.c   |   52 +-
 drivers/net/ethernet/wangxun/libwx/wx_ptp.c   | 1021 +++++++++++++++++
 drivers/net/ethernet/wangxun/libwx/wx_ptp.h   |   20 +
 drivers/net/ethernet/wangxun/libwx/wx_type.h  |  106 ++
 .../net/ethernet/wangxun/ngbe/ngbe_ethtool.c  |    2 +
 drivers/net/ethernet/wangxun/ngbe/ngbe_main.c |   20 +-
 drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c |   11 +
 drivers/net/ethernet/wangxun/ngbe/ngbe_type.h |    5 +
 .../ethernet/wangxun/txgbe/txgbe_ethtool.c    |    2 +
 .../net/ethernet/wangxun/txgbe/txgbe_main.c   |   11 +
 .../net/ethernet/wangxun/txgbe/txgbe_phy.c    |   10 +
 17 files changed, 1333 insertions(+), 7 deletions(-)
 create mode 100644 drivers/net/ethernet/wangxun/libwx/wx_ptp.c
 create mode 100644 drivers/net/ethernet/wangxun/libwx/wx_ptp.h

Comments

Jakub Kicinski Feb. 12, 2025, 12:07 a.m. UTC | #1

On Sat,  8 Feb 2025 11:13:44 +0800 Jiawen Wu wrote:
> Implement support for PTP clock on Wangxun NICs.

Going forward please make sure all files to which you're copying code
from IXGBE retain the copyright from Intel.