[RESEND,net-next,v8,0/1] RTL9300 MDIO driver

Message

Chris Packham March 4, 2025, 1:52 a.m. UTC

This series adds a driver for the MDIO controller on the RTL9300 family
of devices. The controller is a little unique in that we can't access the SMI
interfaces directly. This means we need to use the hardware description from
the DTS to compute a mapping of switch port to mdio bus/address.

The dt-bindings have been applied to net-next.

I've dropped the linux-mips patches at Jakub's request so this can go into
net-next indpendently.

Chris Packham (1):
  net: mdio: Add RTL9300 MDIO driver

 drivers/net/mdio/Kconfig                |   7 +
 drivers/net/mdio/Makefile               |   1 +
 drivers/net/mdio/mdio-realtek-rtl9300.c | 475 ++++++++++++++++++++++++
 4 files changed, 516 insertions(+)
 create mode 100644 drivers/net/mdio/mdio-realtek-rtl9300.c