mbox series

[net-next,v4,0/3] net: phy: bcm63xx: add support for BCM63268 GPHY

Message ID 20250306053105.41677-1-kylehendrydev@gmail.com (mailing list archive)
Headers show
Series net: phy: bcm63xx: add support for BCM63268 GPHY | expand

Message

Kyle Hendry March 6, 2025, 5:30 a.m. UTC 
Some BCM63268 bootloaders do not enable the internal PHYs by default.
This patch series adds a phy driver to set the registers required 
for the gigabit PHY to work. 

Who should I list as maintainer in the schema?

v4 changes:
- Remove unecessary checks
- Make commit message more concise
- Tag for net-next
- Add include to schema to fix dt_binding_check
- Schema formatting

v3: https://lore.kernel.org/netdev/20250228002722.5619-1-kylehendrydev@gmail.com/
- Remove syscon for the GPHY control register
- Change driver to access the GPIO controller syscon
- Move syscon phandle from mdio bus to phy node
- Remove unecessary devm_phy_package_join()
- Made functions static to fix build warning
- Fix formatting and whitespace issues
- Add schema for PHY driver
- Deassert PHY reset signal 

v2: https://lore.kernel.org/netdev/d819144d-ce2f-4ea5-8bfb-83e341672da6@gmail.com/
- Remove changes to b53 dsa code and rework fix as a PHY driver
- Use a regmap for accessing GPHY control register
- Add documentaion for device tree changes

v1: https://lore.kernel.org/netdev/20250206043055.177004-1-kylehendrydev@gmail.com/

Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>

Kyle Hendry (3):
  net: phy: bcm63xx: add support for BCM63268 GPHY
  net: phy: enable bcm63xx on bmips
  dt-bindings: net: phy: add BCM63268 GPHY

 .../bindings/net/brcm,bcm63268-gphy.yaml      | 52 +++++++++++
 drivers/net/phy/Kconfig                       |  4 +-
 drivers/net/phy/bcm63xx.c                     | 88 +++++++++++++++++++
 3 files changed, 142 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/brcm,bcm63268-gphy.yaml