Show patches with: Submitter = Daniel Golle       |    Archived = No       |   522 patches
« 1 2 3 4 … 5 6 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[net] net: ethernet: mtk_wed: fix path of MT7988 WO firmware [net] net: ethernet: mtk_wed: fix path of MT7988 WO firmware - 2 - 181- 2024-10-26 Daniel Golle netdev Accepted
[net-next,v2] net: phy: aquantia: fix return value check in aqr107_config_mdi() [net-next,v2] net: phy: aquantia: fix return value check in aqr107_config_mdi() - 2 1 181- 2024-10-13 Daniel Golle netdev Accepted
[net-next] net: phy: aquantia: fix return value check in aqr107_config_mdi() [net-next] net: phy: aquantia: fix return value check in aqr107_config_mdi() - 1 - 19-- 2024-10-11 Daniel Golle netdev Superseded
[net-next,v2] net: phylink: allow half-duplex modes with RATE_MATCH_PAUSE [net-next,v2] net: phylink: allow half-duplex modes with RATE_MATCH_PAUSE - 1 - 19-- 2024-10-11 Daniel Golle netdev Accepted
net: phylink: allow half-duplex modes with RATE_MATCH_PAUSE net: phylink: allow half-duplex modes with RATE_MATCH_PAUSE - 1 - 171- 2024-10-10 Daniel Golle netdev Superseded
[net-next,v2,3/3] net: phy: realtek: clear 1000Base-T link partner advertisement [net-next,v2,1/3] net: phy: realtek: read duplex and gbit master from PHYSR register - - - 181- 2024-10-10 Daniel Golle netdev Accepted
[net-next,v2,2/3] net: phy: realtek: change order of calls in C22 read_status() [net-next,v2,1/3] net: phy: realtek: read duplex and gbit master from PHYSR register - - - 181- 2024-10-10 Daniel Golle netdev Accepted
[net-next,v2,1/3] net: phy: realtek: read duplex and gbit master from PHYSR register [net-next,v2,1/3] net: phy: realtek: read duplex and gbit master from PHYSR register - - - 172- 2024-10-10 Daniel Golle netdev Accepted
[net-next,v2,5/5] net: phy: intel-xway: add support for PHY LEDs [net-next,v2,1/5] dt-bindings: leds: add 'active-high' property - 1 - 172- 2024-10-10 Daniel Golle netdev Accepted
[net-next,v2,4/5] net: phy: mxl-gpy: correctly describe LED polarity [net-next,v2,1/5] dt-bindings: leds: add 'active-high' property - 1 - 181- 2024-10-10 Daniel Golle netdev Accepted
[net-next,v2,3/5] net: phy: aquantia: correctly describe LED polarity override [net-next,v2,1/5] dt-bindings: leds: add 'active-high' property - 1 - 172- 2024-10-10 Daniel Golle netdev Accepted
[net-next,v2,2/5] net: phy: support 'active-high' property for PHY LEDs [net-next,v2,1/5] dt-bindings: leds: add 'active-high' property - 1 - 181- 2024-10-10 Daniel Golle netdev Accepted
[net-next,v2,1/5] dt-bindings: leds: add 'active-high' property [net-next,v2,1/5] dt-bindings: leds: add 'active-high' property - 1 - 181- 2024-10-10 Daniel Golle netdev Not Applicable
[net-next] net: phy: intel-xway: add support for PHY LEDs [net-next] net: phy: intel-xway: add support for PHY LEDs - - - 1413 2024-10-09 Daniel Golle netdev Superseded
[net-next] net: phy: populate host_interfaces when attaching PHY [net-next] net: phy: populate host_interfaces when attaching PHY - - - 181- 2024-10-09 Daniel Golle netdev Rejected
[net-next,3/3] net: phy: realtek: clear 1000Base-T link partner advertisement [net-next,1/3] net: phy: realtek: read duplex and gbit master from PHYSR register - - - 181- 2024-10-09 Daniel Golle netdev Superseded
[net-next,2/3] net: phy: realtek: change order of calls in C22 read_status() [net-next,1/3] net: phy: realtek: read duplex and gbit master from PHYSR register - - - 181- 2024-10-09 Daniel Golle netdev Superseded
[net-next,1/3] net: phy: realtek: read duplex and gbit master from PHYSR register [net-next,1/3] net: phy: realtek: read duplex and gbit master from PHYSR register - - - 172- 2024-10-09 Daniel Golle netdev Superseded
[net-next,4/4] net: phy: mxl-gpy: correctly describe LED polarity [net-next,1/4] dt-bindings: leds: add 'active-high' property - - - 181- 2024-10-05 Daniel Golle netdev Superseded
[net-next,3/4] net: phy: aquantia: correctly describe LED polarity override [net-next,1/4] dt-bindings: leds: add 'active-high' property - - - 181- 2024-10-05 Daniel Golle netdev Superseded
[net-next,2/4] net: phy: support 'active-high' property for PHY LEDs [net-next,1/4] dt-bindings: leds: add 'active-high' property - - - 181- 2024-10-05 Daniel Golle netdev Superseded
[net-next,1/4] dt-bindings: leds: add 'active-high' property [net-next,1/4] dt-bindings: leds: add 'active-high' property - 1 - 181- 2024-10-05 Daniel Golle netdev Superseded
[net-next,v3,2/2] net: phy: aquantia: allow forcing order of MDI pairs [net-next,v3,1/2] dt-bindings: net: marvell,aquantia: add property to override MDI_CFG - 1 - 19-- 2024-10-04 Daniel Golle netdev Accepted
[net-next,v3,1/2] dt-bindings: net: marvell,aquantia: add property to override MDI_CFG [net-next,v3,1/2] dt-bindings: net: marvell,aquantia: add property to override MDI_CFG - 1 - 19-- 2024-10-04 Daniel Golle netdev Accepted
[net-next] net: phy: mxl-gpy: add missing support for TRIGGER_NETDEV_LINK_10 [net-next] net: phy: mxl-gpy: add missing support for TRIGGER_NETDEV_LINK_10 - 1 - 19-- 2024-10-04 Daniel Golle netdev Accepted
[net-next] net: phy: realtek: make sure paged read is protected by mutex [net-next] net: phy: realtek: make sure paged read is protected by mutex - - - 19-- 2024-10-04 Daniel Golle netdev Changes Requested
[net-next] net: phy: realtek: check validity of 10GbE link-partner advertisement [net-next] net: phy: realtek: check validity of 10GbE link-partner advertisement - - - 19-- 2024-10-04 Daniel Golle netdev Changes Requested
[RFC,net-next] net: phy: always set polarity_modes if op is supported [RFC,net-next] net: phy: always set polarity_modes if op is supported - - - 18-- 2024-10-04 Daniel Golle netdev RFC
[net-next] net: phy: mxl-gpy: add basic LED support [net-next] net: phy: mxl-gpy: add basic LED support - 1 - 1611 2024-10-01 Daniel Golle netdev Accepted
[RFC,net-next] net: phy: mxl-gpy: add basic LED support [RFC,net-next] net: phy: mxl-gpy: add basic LED support - - - 1611 2024-09-29 Daniel Golle netdev Superseded
[net,2/2] net: phy: aquantia: fix applying active_low bit after reset [net,1/2] net: phy: aquantia: fix setting active_low bit - 1 - 19-- 2024-09-17 Daniel Golle netdev Accepted
[net,1/2] net: phy: aquantia: fix setting active_low bit [net,1/2] net: phy: aquantia: fix setting active_low bit - 1 - 19-- 2024-09-17 Daniel Golle netdev Accepted
[net-next,v2,2/2] net: phy: aquantia: allow forcing order of MDI pairs [net-next,v2,1/2] dt-bindings: net: marvell,aquantia: add properties to override MDI_CFG - - - 181- 2024-08-28 Daniel Golle netdev Changes Requested
[net-next,v2,1/2] dt-bindings: net: marvell,aquantia: add properties to override MDI_CFG [net-next,v2,1/2] dt-bindings: net: marvell,aquantia: add properties to override MDI_CFG 1 - - 19-- 2024-08-28 Daniel Golle netdev Changes Requested
[net-next,2/2] net: phy: aquantia: allow forcing order of MDI pairs [net-next,1/2] dt-bindings: net: marvell,aquantia: add properties to override MDI_CFG - - - 1413 2024-08-21 Daniel Golle netdev Superseded
[net-next,1/2] dt-bindings: net: marvell,aquantia: add properties to override MDI_CFG [net-next,1/2] dt-bindings: net: marvell,aquantia: add properties to override MDI_CFG - - - 18-- 2024-08-21 Daniel Golle netdev Superseded
[net-next,v3] net: ethernet: mtk_eth_soc: drop clocks unused by Ethernet driver [net-next,v3] net: ethernet: mtk_eth_soc: drop clocks unused by Ethernet driver - 1 - 19-- 2024-07-30 Daniel Golle netdev Accepted
[net,v2] net: ethernet: mtk_eth_soc: drop clocks unused by Ethernet driver [net,v2] net: ethernet: mtk_eth_soc: drop clocks unused by Ethernet driver - 1 - 19-- 2024-07-28 Daniel Golle netdev Superseded
[RFC,net-next] net: pcs: add helper module for standalone drivers [RFC,net-next] net: pcs: add helper module for standalone drivers - - - 162- 2024-07-25 Daniel Golle netdev RFC
[net] net: ethernet: mtk_eth_soc: drop clocks unused by Ethernet driver [net] net: ethernet: mtk_eth_soc: drop clocks unused by Ethernet driver - 1 - 19-- 2024-07-23 Daniel Golle netdev Superseded
[v5] net: dsa: mt7530: fix impossible MDIO address and issue warning [v5] net: dsa: mt7530: fix impossible MDIO address and issue warning - 2 1 172- 2024-07-05 Daniel Golle netdev Changes Requested
[net,v4] net: dsa: mt7530: fix impossible MDIO address and issue warning [net,v4] net: dsa: mt7530: fix impossible MDIO address and issue warning - 2 1 1512 2024-07-04 Daniel Golle netdev Superseded
[net-next] net: ethernet: mtk_eth_soc: implement .{get,set}_pauseparam ethtool ops [net-next] net: ethernet: mtk_eth_soc: implement .{get,set}_pauseparam ethtool ops - 2 1 181- 2024-07-04 Daniel Golle netdev Accepted
[net,v3] net: dsa: mt7530: fix impossible MDIO address and issue warning [net,v3] net: dsa: mt7530: fix impossible MDIO address and issue warning - 2 1 181- 2024-07-02 Daniel Golle netdev Superseded
[net-next] net: ethernet: mediatek: Allow gaps in MAC allocation [net-next] net: ethernet: mediatek: Allow gaps in MAC allocation - 2 - 19-- 2024-07-01 Daniel Golle netdev Accepted
[net-next,v2] net: phy: air_en8811h: reset netdev rules when LED is set manually [net-next,v2] net: phy: air_en8811h: reset netdev rules when LED is set manually - - - 19-- 2024-05-09 Daniel Golle netdev Accepted
[v3,2/2] net: ethernet: mediatek: use ADMAv1 instead of ADMAv2.0 on MT7981 and MT7986 [v3,1/2] net: ethernet: mediatek: split tx and rx fields in mtk_soc_data struct - - - 181- 2024-05-08 Daniel Golle netdev Accepted
[v3,1/2] net: ethernet: mediatek: split tx and rx fields in mtk_soc_data struct [v3,1/2] net: ethernet: mediatek: split tx and rx fields in mtk_soc_data struct - 1 - 172- 2024-05-08 Daniel Golle netdev Accepted
[net] net: phy: air_en8811h: reset netdev rules when LED is set manually [net] net: phy: air_en8811h: reset netdev rules when LED is set manually - - - 1-1 2024-05-08 Daniel Golle netdev Superseded
[net,v2,2/2] net: ethernet: mediatek: use ADMAv1 instead of ADMAv2.0 on MT7981 and MT7986 [net,v2,1/2] net: ethernet: mediatek: split tx and rx fields in mtk_soc_data struct - 1 - 1-1 2024-05-07 Daniel Golle netdev Superseded
[net,v2,1/2] net: ethernet: mediatek: split tx and rx fields in mtk_soc_data struct [net,v2,1/2] net: ethernet: mediatek: split tx and rx fields in mtk_soc_data struct - 1 - 1-1 2024-05-07 Daniel Golle netdev Superseded
[v2] dt-bindings: net: mediatek: remove wrongly added clocks and SerDes [v2] dt-bindings: net: mediatek: remove wrongly added clocks and SerDes 1 - - 1-- 2024-05-07 Daniel Golle netdev Accepted
[net,2/2] net: ethernet: mediatek: use QDMA instead of ADMAv2 on MT7981 and MT7986 [net,1/2] net: ethernet: mediatek: split tx and rx fields in mtk_soc_data struct - - - 181- 2024-05-03 Daniel Golle netdev Superseded
[net,1/2] net: ethernet: mediatek: split tx and rx fields in mtk_soc_data struct [net,1/2] net: ethernet: mediatek: split tx and rx fields in mtk_soc_data struct - - - 181- 2024-05-03 Daniel Golle netdev Superseded
[net,v2] net: dsa: mt7530: fix impossible MDIO address and issue warning [net,v2] net: dsa: mt7530: fix impossible MDIO address and issue warning - - - 1711 2024-04-30 Daniel Golle netdev Changes Requested
dt-bindings: net: mediatek: remove wrongly added clocks and SerDes dt-bindings: net: mediatek: remove wrongly added clocks and SerDes - - - 1-- 2024-04-30 Daniel Golle netdev Superseded
[net] net: dsa: mt7530: fix impossible MDIO address and issue warning [net] net: dsa: mt7530: fix impossible MDIO address and issue warning - - - 1413 2024-04-29 Daniel Golle netdev Superseded
[net] net: phy: mediatek-ge-soc: follow netdev LED trigger semantics [net] net: phy: mediatek-ge-soc: follow netdev LED trigger semantics - - - 181- 2024-04-21 Daniel Golle netdev Accepted
[v4,2/2] phy: add driver for MediaTek XFI T-PHY [v4,1/2] dt-bindings: phy: mediatek,mt7988-xfi-tphy: add new bindings - 2 - 181- 2024-04-09 Daniel Golle Not Applicable
[v4,1/2] dt-bindings: phy: mediatek,mt7988-xfi-tphy: add new bindings [v4,1/2] dt-bindings: phy: mediatek,mt7988-xfi-tphy: add new bindings - 3 - 172- 2024-04-09 Daniel Golle Not Applicable
[net,2/2] net: ethernet: mtk_eth_soc: fix PPE hanging issue [net,1/2] net: mediatek: mtk_eth_soc: clear MAC_MCR_FORCE_LINK only when MAC is up - - - 18-1 2024-03-13 Daniel Golle netdev Accepted
[net,1/2] net: mediatek: mtk_eth_soc: clear MAC_MCR_FORCE_LINK only when MAC is up [net,1/2] net: mediatek: mtk_eth_soc: clear MAC_MCR_FORCE_LINK only when MAC is up - - - 181- 2024-03-13 Daniel Golle netdev Accepted
[v3,2/2] phy: add driver for MediaTek XFI T-PHY [v3,1/2] dt-bindings: phy: mediatek,mt7988-xfi-tphy: add new bindings - 1 - 1611 2024-02-10 Daniel Golle Not Applicable
[v3,1/2] dt-bindings: phy: mediatek,mt7988-xfi-tphy: add new bindings [v3,1/2] dt-bindings: phy: mediatek,mt7988-xfi-tphy: add new bindings - 2 - 162- 2024-02-10 Daniel Golle Not Applicable
[v2,2/2] phy: add driver for MediaTek XFI T-PHY [v2,1/2] dt-bindings: phy: mediatek,mt7988-xfi-tphy: add new bindings - 1 - 1611 2024-02-05 Daniel Golle Superseded
[v2,1/2] dt-bindings: phy: mediatek,mt7988-xfi-tphy: add new bindings [v2,1/2] dt-bindings: phy: mediatek,mt7988-xfi-tphy: add new bindings - 1 - 162- 2024-02-05 Daniel Golle Superseded
[2/2] phy: add driver for MediaTek XFI T-PHY [1/2] dt-bindings: phy: mediatek,xfi-tphy: add new bindings - - - 171- 2024-02-01 Daniel Golle Changes Requested
[1/2] dt-bindings: phy: mediatek,xfi-tphy: add new bindings [1/2] dt-bindings: phy: mediatek,xfi-tphy: add new bindings - - - 171- 2024-02-01 Daniel Golle Changes Requested
[net] net: ethernet: mtk_eth_soc: set DMA coherent mask to get PPE working [net] net: ethernet: mtk_eth_soc: set DMA coherent mask to get PPE working - - - 181- 2024-01-24 Daniel Golle netdev Accepted
[net] net: phy: mediatek-ge-soc: sync driver with MediaTek SDK [net] net: phy: mediatek-ge-soc: sync driver with MediaTek SDK - - - 181- 2024-01-24 Daniel Golle netdev Accepted
[net] net: dsa: mt7530: fix 10M/100M speed on MT7988 switch [net] net: dsa: mt7530: fix 10M/100M speed on MT7988 switch 1 1 - 18-1 2024-01-24 Daniel Golle netdev Accepted
[v7,5/5] clk: mediatek: add drivers for MT7988 SoC [v7,1/5] dt-bindings: clock: mediatek: add MT7988 clock IDs - 1 - 1-- 2023-12-17 Daniel Golle Not Applicable
[v7,4/5] clk: mediatek: add pcw_chg_bit control for PLLs of MT7988 [v7,1/5] dt-bindings: clock: mediatek: add MT7988 clock IDs - 1 - 1-- 2023-12-17 Daniel Golle Not Applicable
[v7,3/5] dt-bindings: clock: mediatek: add clock controllers of MT7988 [v7,1/5] dt-bindings: clock: mediatek: add MT7988 clock IDs - 2 - 1-- 2023-12-17 Daniel Golle netdev Not Applicable
[v7,2/5] dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs [v7,1/5] dt-bindings: clock: mediatek: add MT7988 clock IDs 1 1 - 1-- 2023-12-17 Daniel Golle Not Applicable
[v7,1/5] dt-bindings: clock: mediatek: add MT7988 clock IDs [v7,1/5] dt-bindings: clock: mediatek: add MT7988 clock IDs 1 1 - 1-- 2023-12-17 Daniel Golle Not Applicable
[v6,5/5] clk: mediatek: add drivers for MT7988 SoC [v6,1/5] dt-bindings: clock: mediatek: add MT7988 clock IDs - 1 - 1-- 2023-12-16 Daniel Golle Superseded
[v6,4/5] clk: mediatek: add pcw_chg_bit control for PLLs of MT7988 [v6,1/5] dt-bindings: clock: mediatek: add MT7988 clock IDs - 1 - 1-- 2023-12-16 Daniel Golle Superseded
[v6,3/5] dt-bindings: clock: mediatek: add clock controllers of MT7988 [v6,1/5] dt-bindings: clock: mediatek: add MT7988 clock IDs - 1 - 1-- 2023-12-16 Daniel Golle netdev Superseded
[v6,2/5] dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs [v6,1/5] dt-bindings: clock: mediatek: add MT7988 clock IDs 1 1 - 1-- 2023-12-16 Daniel Golle Superseded
[v6,1/5] dt-bindings: clock: mediatek: add MT7988 clock IDs [v6,1/5] dt-bindings: clock: mediatek: add MT7988 clock IDs 1 1 - 1-- 2023-12-16 Daniel Golle Superseded
[RFC,net-next,v3,8/8] net: ethernet: mtk_eth_soc: add paths and SerDes modes for MT7988 Add support for 10G Ethernet SerDes on MT7988 - - - 161- 2023-12-12 Daniel Golle netdev RFC
[RFC,net-next,v3,7/8] dt-bindings: net: mediatek,net: fix and complete mt7988-eth binding Add support for 10G Ethernet SerDes on MT7988 1 1 - 17-- 2023-12-12 Daniel Golle netdev RFC
[RFC,net-next,v3,6/8] dt-bindings: net: mediatek: remove wrongly added clocks and SerDes Add support for 10G Ethernet SerDes on MT7988 1 - - 17-- 2023-12-12 Daniel Golle netdev RFC
[RFC,net-next,v3,5/8] net: pcs: add driver for MediaTek USXGMII PCS Add support for 10G Ethernet SerDes on MT7988 - - - 1511 2023-12-12 Daniel Golle netdev RFC
[RFC,net-next,v3,4/8] dt-bindings: net: pcs: add bindings for MediaTek USXGMII PCS Add support for 10G Ethernet SerDes on MT7988 - - - 161- 2023-12-12 Daniel Golle netdev RFC
[RFC,net-next,v3,3/8] net: pcs: pcs-mtk-lynxi: add platform driver for MT7988 Add support for 10G Ethernet SerDes on MT7988 - - - 161- 2023-12-12 Daniel Golle netdev RFC
[RFC,net-next,v3,2/8] phy: add driver for MediaTek pextp 10GE SerDes PHY Add support for 10G Ethernet SerDes on MT7988 - - - 161- 2023-12-12 Daniel Golle netdev RFC
[RFC,net-next,v3,1/8] dt-bindings: phy: mediatek,xfi-pextp: add new bindings Add support for 10G Ethernet SerDes on MT7988 - - - 161- 2023-12-12 Daniel Golle netdev RFC
[v5,5/5] clk: mediatek: add drivers for MT7988 SoC [v5,1/5] dt-bindings: clock: mediatek: add MT7988 clock IDs - 1 - 1-- 2023-12-12 Daniel Golle Superseded
[v5,4/5] clk: mediatek: add pcw_chg_bit control for PLLs of MT7988 [v5,1/5] dt-bindings: clock: mediatek: add MT7988 clock IDs - 1 - 1-- 2023-12-12 Daniel Golle Superseded
[v5,3/5] dt-bindings: clock: mediatek: add clock controllers of MT7988 [v5,1/5] dt-bindings: clock: mediatek: add MT7988 clock IDs - 1 - 1-- 2023-12-12 Daniel Golle netdev Superseded
[v5,2/5] dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs [v5,1/5] dt-bindings: clock: mediatek: add MT7988 clock IDs 1 1 - 1-- 2023-12-12 Daniel Golle Superseded
[v5,1/5] dt-bindings: clock: mediatek: add MT7988 clock IDs [v5,1/5] dt-bindings: clock: mediatek: add MT7988 clock IDs 1 1 - 1-- 2023-12-12 Daniel Golle Superseded
[net] net: phy: skip LED triggers on PHYs on SFP modules [net] net: phy: skip LED triggers on PHYs on SFP modules - - - 16-1 2023-12-12 Daniel Golle netdev Accepted
[v4,4/4] clk: mediatek: add drivers for MT7988 SoC [v4,1/4] dt-bindings: clock: mediatek: add MT7988 clock IDs - - - 1-- 2023-12-09 Daniel Golle Superseded
[v4,3/4] clk: mediatek: Add pcw_chg_shift control [v4,1/4] dt-bindings: clock: mediatek: add MT7988 clock IDs - - - 1-- 2023-12-09 Daniel Golle Superseded
[v4,2/4] dt-bindings: clock: mediatek: add clock controllers of MT7988 [v4,1/4] dt-bindings: clock: mediatek: add MT7988 clock IDs - - - 1-- 2023-12-09 Daniel Golle netdev Superseded
[v4,1/4] dt-bindings: clock: mediatek: add MT7988 clock IDs [v4,1/4] dt-bindings: clock: mediatek: add MT7988 clock IDs 1 1 - 1-- 2023-12-09 Daniel Golle Superseded
[RFC,v2,8/8] net: ethernet: mtk_eth_soc: add paths and SerDes modes for MT7988 Add support for 10G Ethernet SerDes on MT7988 - - - 161- 2023-12-06 Daniel Golle netdev Superseded
« 1 2 3 4 … 5 6 »