diff mbox series

[v4,net-next,2/4] nfc: s3fwrn5: reduce the EN_WAIT_TIME

Message ID 1606830628-10236-3-git-send-email-bongsu.jeon@samsung.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series nfc: s3fwrn5: Support a UART interface | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 24 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Bongsu Jeon Dec. 1, 2020, 1:50 p.m. UTC 
From: Bongsu Jeon <bongsu.jeon@samsung.com>

The delay of 20ms is enough to enable and
wake up the Samsung's nfc chip.

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
---
 drivers/nfc/s3fwrn5/i2c.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/nfc/s3fwrn5/i2c.c b/drivers/nfc/s3fwrn5/i2c.c
index ae26594..9a64eea 100644
--- a/drivers/nfc/s3fwrn5/i2c.c
+++ b/drivers/nfc/s3fwrn5/i2c.c
@@ -19,7 +19,7 @@ 
 
 #define S3FWRN5_I2C_DRIVER_NAME "s3fwrn5_i2c"
 
-#define S3FWRN5_EN_WAIT_TIME 150
+#define S3FWRN5_EN_WAIT_TIME 20
 
 struct s3fwrn5_i2c_phy {
 	struct i2c_client *i2c_dev;
@@ -40,7 +40,7 @@  static void s3fwrn5_i2c_set_wake(void *phy_id, bool wake)
 
 	mutex_lock(&phy->mutex);
 	gpio_set_value(phy->gpio_fw_wake, wake);
-	msleep(S3FWRN5_EN_WAIT_TIME/2);
+	msleep(S3FWRN5_EN_WAIT_TIME);
 	mutex_unlock(&phy->mutex);
 }
 
@@ -63,7 +63,7 @@  static void s3fwrn5_i2c_set_mode(void *phy_id, enum s3fwrn5_mode mode)
 	if (mode != S3FWRN5_MODE_COLD) {
 		msleep(S3FWRN5_EN_WAIT_TIME);
 		gpio_set_value(phy->gpio_en, 0);
-		msleep(S3FWRN5_EN_WAIT_TIME/2);
+		msleep(S3FWRN5_EN_WAIT_TIME);
 	}
 
 	phy->irq_skip = true;