diff mbox series

[net-next,1/7] bnxt_en: Improve the status_reliable flag in bp->fw_health.

Message ID 1616396925-16596-2-git-send-email-michael.chan@broadcom.com (mailing list archive)
State Accepted
Commit 43a440c4007b28c473afba966e8410459db4975f
Delegated to: Netdev Maintainers
Headers show
Series bnxt_en: Error recovery improvements. | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 4 of 4 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 80 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Michael Chan March 22, 2021, 7:08 a.m. UTC 
In order to read the firmware health status, we first need to determine
the register location and then the register may need to be mapped.
There are 2 code paths to do this.  The first one is done early as a
best effort attempt by the function bnxt_try_map_fw_health_reg().  The
second one is done later in the function bnxt_map_fw_health_regs()
after establishing communications with the firmware.  We currently
only set fw_health->status_reliable if we can successfully set up the
health register in the first code path.

Improve the scheme by setting the fw_health->status_reliable flag if
either (or both) code paths can successfully set up the health
register.  This flag is relied upon during run-time when we need to
check the health status.  So this will make it work better.

During ifdown, if the health register is mapped, we need to invalidate
the health register mapping because a potential fw reset will reset
the mapping.  Similarly, we need to do the same after firmware reset
during recovery.  We'll remap it during ifup.

Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 31 +++++++++++++++++++----
 1 file changed, 26 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index b53a0d87371a..16cf18eb7b3d 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -7540,6 +7540,19 @@  static void __bnxt_map_fw_health_reg(struct bnxt *bp, u32 reg)
 					 BNXT_FW_HEALTH_WIN_MAP_OFF);
 }
 
+static void bnxt_inv_fw_health_reg(struct bnxt *bp)
+{
+	struct bnxt_fw_health *fw_health = bp->fw_health;
+	u32 reg_type;
+
+	if (!fw_health || !fw_health->status_reliable)
+		return;
+
+	reg_type = BNXT_FW_HEALTH_REG_TYPE(fw_health->regs[BNXT_FW_HEALTH_REG]);
+	if (reg_type == BNXT_FW_HEALTH_REG_TYPE_GRC)
+		fw_health->status_reliable = false;
+}
+
 static void bnxt_try_map_fw_health_reg(struct bnxt *bp)
 {
 	void __iomem *hs;
@@ -7547,6 +7560,9 @@  static void bnxt_try_map_fw_health_reg(struct bnxt *bp)
 	u32 reg_type;
 	u32 sig;
 
+	if (bp->fw_health)
+		bp->fw_health->status_reliable = false;
+
 	__bnxt_map_fw_health_reg(bp, HCOMM_STATUS_STRUCT_LOC);
 	hs = bp->bar0 + BNXT_FW_HEALTH_WIN_OFF(HCOMM_STATUS_STRUCT_LOC);
 
@@ -7558,11 +7574,9 @@  static void bnxt_try_map_fw_health_reg(struct bnxt *bp)
 					     BNXT_FW_HEALTH_WIN_BASE +
 					     BNXT_GRC_REG_CHIP_NUM);
 		}
-		if (!BNXT_CHIP_P5(bp)) {
-			if (bp->fw_health)
-				bp->fw_health->status_reliable = false;
+		if (!BNXT_CHIP_P5(bp))
 			return;
-		}
+
 		status_loc = BNXT_GRC_REG_STATUS_P5 |
 			     BNXT_FW_HEALTH_REG_TYPE_BAR0;
 	} else {
@@ -7592,6 +7606,7 @@  static int bnxt_map_fw_health_regs(struct bnxt *bp)
 	u32 reg_base = 0xffffffff;
 	int i;
 
+	bp->fw_health->status_reliable = false;
 	/* Only pre-map the monitoring GRC registers using window 3 */
 	for (i = 0; i < 4; i++) {
 		u32 reg = fw_health->regs[i];
@@ -7604,6 +7619,7 @@  static int bnxt_map_fw_health_regs(struct bnxt *bp)
 			return -ERANGE;
 		fw_health->mapped_regs[i] = BNXT_FW_HEALTH_WIN_OFF(reg);
 	}
+	bp->fw_health->status_reliable = true;
 	if (reg_base == 0xffffffff)
 		return 0;
 
@@ -9556,13 +9572,17 @@  static int bnxt_hwrm_if_change(struct bnxt *bp, bool up)
 	if (rc)
 		return rc;
 
-	if (!up)
+	if (!up) {
+		bnxt_inv_fw_health_reg(bp);
 		return 0;
+	}
 
 	if (flags & FUNC_DRV_IF_CHANGE_RESP_FLAGS_RESC_CHANGE)
 		resc_reinit = true;
 	if (flags & FUNC_DRV_IF_CHANGE_RESP_FLAGS_HOT_FW_RESET_DONE)
 		fw_reset = true;
+	else if (bp->fw_health && !bp->fw_health->status_reliable)
+		bnxt_try_map_fw_health_reg(bp);
 
 	if (test_bit(BNXT_STATE_IN_FW_RESET, &bp->state) && !fw_reset) {
 		netdev_err(bp->dev, "RESET_DONE not set during FW reset.\n");
@@ -11723,6 +11743,7 @@  static void bnxt_fw_reset_task(struct work_struct *work)
 		bnxt_queue_fw_reset_work(bp, bp->fw_reset_min_dsecs * HZ / 10);
 		return;
 	case BNXT_FW_RESET_STATE_ENABLE_DEV:
+		bnxt_inv_fw_health_reg(bp);
 		if (test_bit(BNXT_STATE_FW_FATAL_COND, &bp->state)) {
 			u32 val;