diff mbox series

[net-next,5/7] bnxt_en: Set BNXT_STATE_FW_RESET_DET flag earlier for the RDMA driver.

Message ID 1616396925-16596-6-git-send-email-michael.chan@broadcom.com (mailing list archive)
State Accepted
Commit 2924ad95cb51673ed3544cf371cafc66e2c76cc8
Delegated to: Netdev Maintainers
Headers show
Series bnxt_en: Error recovery improvements. | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 4 of 4 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 25 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Michael Chan March 22, 2021, 7:08 a.m. UTC 
During ifup, if the driver detects that firmware has gone through a
reset, it will go through a re-probe sequence.  If the RDMA driver is
loaded, the re-probe sequence includes calling the RDMA driver to stop.
We need to set the BNXT_STATE_FW_RESET_DET flag earlier so that it is
visible to the RDMA driver.  The RDMA driver's stop sequence is
different if firmware has gone through a reset.

Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: P B S Naresh Kumar <nareshkumar.pbs@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 7f40dd7d847d..edbe5982cf41 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -9611,6 +9611,7 @@  static int bnxt_hwrm_if_change(struct bnxt *bp, bool up)
 	}
 	if (resc_reinit || fw_reset) {
 		if (fw_reset) {
+			set_bit(BNXT_STATE_FW_RESET_DET, &bp->state);
 			if (!test_bit(BNXT_STATE_IN_FW_RESET, &bp->state))
 				bnxt_ulp_stop(bp);
 			bnxt_free_ctx_mem(bp);
@@ -9619,16 +9620,17 @@  static int bnxt_hwrm_if_change(struct bnxt *bp, bool up)
 			bnxt_dcb_free(bp);
 			rc = bnxt_fw_init_one(bp);
 			if (rc) {
+				clear_bit(BNXT_STATE_FW_RESET_DET, &bp->state);
 				set_bit(BNXT_STATE_ABORT_ERR, &bp->state);
 				return rc;
 			}
 			bnxt_clear_int_mode(bp);
 			rc = bnxt_init_int_mode(bp);
 			if (rc) {
+				clear_bit(BNXT_STATE_FW_RESET_DET, &bp->state);
 				netdev_err(bp->dev, "init int mode failed\n");
 				return rc;
 			}
-			set_bit(BNXT_STATE_FW_RESET_DET, &bp->state);
 		}
 		if (BNXT_NEW_RM(bp)) {
 			struct bnxt_hw_resc *hw_resc = &bp->hw_resc;