diff mbox series

[net-next,7/9] octeontx2-af: Add PTP device id for CN10K and 95O silcons

Message ID 1629893926-18398-8-git-send-email-sgoutham@marvell.com (mailing list archive)
State Changes Requested
Delegated to: Netdev Maintainers
Headers show
Series Octeontx2: Traffic shaping and SDP link config support | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers warning 4 maintainers not CCed: lcherian@marvell.com hkelam@marvell.com jerinj@marvell.com gakula@marvell.com
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 90 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Sunil Kovvuri Goutham Aug. 25, 2021, 12:18 p.m. UTC 
From: Subbaraya Sundeep <sbhatta@marvell.com>

CN10K slicon has different device id for PTP device.
Hence this patch updates the driver with new id.
Though ptp driver being a separate driver AF manages
configuring PTP block by all PFs. To manage ptp, AF
driver checks in its probe whether
1. ptp hardware device found on silicon
2. A driver is bound to ptp device
3. The ptp driver probe is successful

In failure of cases 1 and 3, AF proceeds with out ptp
and for case 2 defers the probe. This patch refactors
code also to check for all the PTP device ids given in
ptp device ids table for case 1.

Also added PTP device ID for 95O silicon

Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
 drivers/net/ethernet/marvell/octeontx2/af/ptp.c | 43 +++++++++++--------------
 1 file changed, 18 insertions(+), 25 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/ptp.c b/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
index 1ee3785..ce193ef 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
@@ -19,12 +19,11 @@ 
 #define PCI_SUBSYS_DEVID_OCTX2_98xx_PTP		0xB100
 #define PCI_SUBSYS_DEVID_OCTX2_96XX_PTP		0xB200
 #define PCI_SUBSYS_DEVID_OCTX2_95XX_PTP		0xB300
-#define PCI_SUBSYS_DEVID_OCTX2_LOKI_PTP		0xB400
+#define PCI_SUBSYS_DEVID_OCTX2_95XXN_PTP	0xB400
 #define PCI_SUBSYS_DEVID_OCTX2_95MM_PTP		0xB500
-#define PCI_SUBSYS_DEVID_CN10K_A_PTP		0xB900
-#define PCI_SUBSYS_DEVID_CNF10K_A_PTP		0xBA00
-#define PCI_SUBSYS_DEVID_CNF10K_B_PTP		0xBC00
+#define PCI_SUBSYS_DEVID_OCTX2_95XXO_PTP	0xB600
 #define PCI_DEVID_OCTEONTX2_RST			0xA085
+#define PCI_DEVID_CN10K_PTP			0xA09E
 
 #define PCI_PTP_BAR_NO				0
 #define PCI_RST_BAR_NO				0
@@ -39,6 +38,9 @@ 
 #define RST_MUL_BITS				GENMASK_ULL(38, 33)
 #define CLOCK_BASE_RATE				50000000ULL
 
+static struct ptp *first_ptp_block;
+static const struct pci_device_id ptp_id_table[];
+
 static u64 get_clock_rate(void)
 {
 	u64 cfg, ret = CLOCK_BASE_RATE * 16;
@@ -74,23 +76,14 @@  static u64 get_clock_rate(void)
 
 struct ptp *ptp_get(void)
 {
-	struct pci_dev *pdev;
-	struct ptp *ptp;
+	struct ptp *ptp = first_ptp_block;
 
-	/* If the PTP pci device is found on the system and ptp
-	 * driver is bound to it then the PTP pci device is returned
-	 * to the caller(rvu driver).
-	 */
-	pdev = pci_get_device(PCI_VENDOR_ID_CAVIUM,
-			      PCI_DEVID_OCTEONTX2_PTP, NULL);
-	if (!pdev)
+	/* Check PTP block is present in hardware */
+	if (!pci_dev_present(ptp_id_table))
 		return ERR_PTR(-ENODEV);
-
-	ptp = pci_get_drvdata(pdev);
+	/* Check driver is bound to PTP block */
 	if (!ptp)
 		ptp = ERR_PTR(-EPROBE_DEFER);
-	if (IS_ERR(ptp))
-		pci_dev_put(pdev);
 
 	return ptp;
 }
@@ -190,6 +183,8 @@  static int ptp_probe(struct pci_dev *pdev,
 	writeq(clock_comp, ptp->reg_base + PTP_CLOCK_COMP);
 
 	pci_set_drvdata(pdev, ptp);
+	if (!first_ptp_block)
+		first_ptp_block = ptp;
 
 	return 0;
 
@@ -204,6 +199,9 @@  static int ptp_probe(struct pci_dev *pdev,
 	 * `dev->driver_data`.
 	 */
 	pci_set_drvdata(pdev, ERR_PTR(err));
+	if (!first_ptp_block)
+		first_ptp_block = ERR_PTR(err);
+
 	return 0;
 }
 
@@ -233,19 +231,14 @@  static const struct pci_device_id ptp_id_table[] = {
 			 PCI_SUBSYS_DEVID_OCTX2_95XX_PTP) },
 	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_OCTEONTX2_PTP,
 			 PCI_VENDOR_ID_CAVIUM,
-			 PCI_SUBSYS_DEVID_OCTX2_LOKI_PTP) },
+			 PCI_SUBSYS_DEVID_OCTX2_95XXN_PTP) },
 	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_OCTEONTX2_PTP,
 			 PCI_VENDOR_ID_CAVIUM,
 			 PCI_SUBSYS_DEVID_OCTX2_95MM_PTP) },
 	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_OCTEONTX2_PTP,
 			 PCI_VENDOR_ID_CAVIUM,
-			 PCI_SUBSYS_DEVID_CN10K_A_PTP) },
-	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_OCTEONTX2_PTP,
-			 PCI_VENDOR_ID_CAVIUM,
-			 PCI_SUBSYS_DEVID_CNF10K_A_PTP) },
-	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_OCTEONTX2_PTP,
-			 PCI_VENDOR_ID_CAVIUM,
-			 PCI_SUBSYS_DEVID_CNF10K_B_PTP) },
+			 PCI_SUBSYS_DEVID_OCTX2_95XXO_PTP) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_CN10K_PTP) },
 	{ 0, }
 };