diff mbox series

[net-next,v2] octeontx2-pf: Change receive buffer size using ethtool

Message ID 1643343096-31954-1-git-send-email-sbhatta@marvell.com (mailing list archive)
State Accepted
Commit a989eb66684da7b51c3b00cb6eb910df1217002c
Delegated to: Netdev Maintainers
Headers show
Series [net-next,v2] octeontx2-pf: Change receive buffer size using ethtool | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter success Single patches do not need cover letters
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers success CCed 7 of 7 maintainers
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 14 this patch: 14
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 114 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Subbaraya Sundeep Jan. 28, 2022, 4:11 a.m. UTC
ethtool rx-buf-len is for setting receive buffer size,
support setting it via ethtool -G parameter and getting
it via ethtool -g parameter.

Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---

v3:
 No changes. Submitting after net-next is opened.
v2:
 As per Jakub comments, changed logic not to reset
 receive buffer length when user changes mtu.

 .../net/ethernet/marvell/octeontx2/nic/otx2_common.c  |  7 +++++++
 .../net/ethernet/marvell/octeontx2/nic/otx2_common.h  |  3 +++
 .../net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c | 19 ++++++++++++++++++-
 drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c  |  4 ++++
 drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c  |  1 +
 5 files changed, 33 insertions(+), 1 deletion(-)

Comments

patchwork-bot+netdevbpf@kernel.org Jan. 28, 2022, 3:10 p.m. UTC | #1
Hello:

This patch was applied to netdev/net-next.git (master)
by David S. Miller <davem@davemloft.net>:

On Fri, 28 Jan 2022 09:41:36 +0530 you wrote:
> ethtool rx-buf-len is for setting receive buffer size,
> support setting it via ethtool -G parameter and getting
> it via ethtool -g parameter.
> 
> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
> Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
> 
> [...]

Here is the summary with links:
  - [net-next,v2] octeontx2-pf: Change receive buffer size using ethtool
    https://git.kernel.org/netdev/net-next/c/a989eb66684d

You are awesome, thank you!
diff mbox series

Patch

diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
index 66da31f..92c0ddb 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
@@ -222,8 +222,11 @@  EXPORT_SYMBOL(otx2_set_mac_address);
 int otx2_hw_set_mtu(struct otx2_nic *pfvf, int mtu)
 {
 	struct nix_frs_cfg *req;
+	u16 maxlen;
 	int err;
 
+	maxlen = otx2_get_max_mtu(pfvf) + OTX2_ETH_HLEN + OTX2_HW_TIMESTAMP_LEN;
+
 	mutex_lock(&pfvf->mbox.lock);
 	req = otx2_mbox_alloc_msg_nix_set_hw_frs(&pfvf->mbox);
 	if (!req) {
@@ -233,6 +236,10 @@  int otx2_hw_set_mtu(struct otx2_nic *pfvf, int mtu)
 
 	req->maxlen = pfvf->netdev->mtu + OTX2_ETH_HLEN + OTX2_HW_TIMESTAMP_LEN;
 
+	/* Use max receive length supported by hardware for loopback devices */
+	if (is_otx2_lbkvf(pfvf->pdev))
+		req->maxlen = maxlen;
+
 	err = otx2_sync_mbox_msg(&pfvf->mbox);
 	mutex_unlock(&pfvf->mbox.lock);
 	return err;
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
index 61e5281..8a6539b 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
@@ -178,6 +178,9 @@  struct otx2_hw {
 	u16			rqpool_cnt;
 	u16			sqpool_cnt;
 
+#define OTX2_DEFAULT_RBUF_LEN	2048
+	u16			rbuf_len;
+
 	/* NPA */
 	u32			stack_pg_ptrs;  /* No of ptrs per stack page */
 	u32			stack_pg_bytes; /* Size of stack page */
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
index d85db90..abe5267 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
@@ -371,6 +371,7 @@  static void otx2_get_ringparam(struct net_device *netdev,
 	ring->rx_pending = qs->rqe_cnt ? qs->rqe_cnt : Q_COUNT(Q_SIZE_256);
 	ring->tx_max_pending = Q_COUNT(Q_SIZE_MAX);
 	ring->tx_pending = qs->sqe_cnt ? qs->sqe_cnt : Q_COUNT(Q_SIZE_4K);
+	kernel_ring->rx_buf_len = pfvf->hw.rbuf_len;
 }
 
 static int otx2_set_ringparam(struct net_device *netdev,
@@ -379,6 +380,8 @@  static int otx2_set_ringparam(struct net_device *netdev,
 			      struct netlink_ext_ack *extack)
 {
 	struct otx2_nic *pfvf = netdev_priv(netdev);
+	u32 rx_buf_len = kernel_ring->rx_buf_len;
+	u32 old_rx_buf_len = pfvf->hw.rbuf_len;
 	bool if_up = netif_running(netdev);
 	struct otx2_qset *qs = &pfvf->qset;
 	u32 rx_count, tx_count;
@@ -386,6 +389,15 @@  static int otx2_set_ringparam(struct net_device *netdev,
 	if (ring->rx_mini_pending || ring->rx_jumbo_pending)
 		return -EINVAL;
 
+	/* Hardware supports max size of 32k for a receive buffer
+	 * and 1536 is typical ethernet frame size.
+	 */
+	if (rx_buf_len && (rx_buf_len < 1536 || rx_buf_len > 32768)) {
+		netdev_err(netdev,
+			   "Receive buffer range is 1536 - 32768");
+		return -EINVAL;
+	}
+
 	/* Permitted lengths are 16 64 256 1K 4K 16K 64K 256K 1M  */
 	rx_count = ring->rx_pending;
 	/* On some silicon variants a skid or reserved CQEs are
@@ -403,7 +415,8 @@  static int otx2_set_ringparam(struct net_device *netdev,
 			   Q_COUNT(Q_SIZE_4K), Q_COUNT(Q_SIZE_MAX));
 	tx_count = Q_COUNT(Q_SIZE(tx_count, 3));
 
-	if (tx_count == qs->sqe_cnt && rx_count == qs->rqe_cnt)
+	if (tx_count == qs->sqe_cnt && rx_count == qs->rqe_cnt &&
+	    rx_buf_len == old_rx_buf_len)
 		return 0;
 
 	if (if_up)
@@ -413,6 +426,8 @@  static int otx2_set_ringparam(struct net_device *netdev,
 	qs->sqe_cnt = tx_count;
 	qs->rqe_cnt = rx_count;
 
+	pfvf->hw.rbuf_len = rx_buf_len;
+
 	if (if_up)
 		return netdev->netdev_ops->ndo_open(netdev);
 
@@ -1207,6 +1222,7 @@  static int otx2_set_link_ksettings(struct net_device *netdev,
 static const struct ethtool_ops otx2_ethtool_ops = {
 	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
 				     ETHTOOL_COALESCE_MAX_FRAMES,
+	.supported_ring_params  = ETHTOOL_RING_USE_RX_BUF_LEN,
 	.get_link		= otx2_get_link,
 	.get_drvinfo		= otx2_get_drvinfo,
 	.get_strings		= otx2_get_strings,
@@ -1326,6 +1342,7 @@  static int otx2vf_get_link_ksettings(struct net_device *netdev,
 static const struct ethtool_ops otx2vf_ethtool_ops = {
 	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
 				     ETHTOOL_COALESCE_MAX_FRAMES,
+	.supported_ring_params  = ETHTOOL_RING_USE_RX_BUF_LEN,
 	.get_link		= otx2_get_link,
 	.get_drvinfo		= otx2vf_get_drvinfo,
 	.get_strings		= otx2vf_get_strings,
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
index 6080ebd..3699b58 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -1306,6 +1306,9 @@  static int otx2_get_rbuf_size(struct otx2_nic *pf, int mtu)
 	int total_size;
 	int rbuf_size;
 
+	if (pf->hw.rbuf_len)
+		return ALIGN(pf->hw.rbuf_len, OTX2_ALIGN) + OTX2_HEAD_ROOM;
+
 	/* The data transferred by NIX to memory consists of actual packet
 	 * plus additional data which has timestamp and/or EDSA/HIGIG2
 	 * headers if interface is configured in corresponding modes.
@@ -2620,6 +2623,7 @@  static int otx2_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	hw->tx_queues = qcount;
 	hw->tot_tx_queues = qcount;
 	hw->max_queues = qcount;
+	hw->rbuf_len = OTX2_DEFAULT_RBUF_LEN;
 
 	num_vec = pci_msix_vec_count(pdev);
 	hw->irq_name = devm_kmalloc_array(&hw->pdev->dev, num_vec, NAME_SIZE,
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
index 925b74e..d96c890 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
@@ -586,6 +586,7 @@  static int otx2vf_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	hw->tx_queues = qcount;
 	hw->max_queues = qcount;
 	hw->tot_tx_queues = qcount;
+	hw->rbuf_len = OTX2_DEFAULT_RBUF_LEN;
 
 	hw->irq_name = devm_kmalloc_array(&hw->pdev->dev, num_vec, NAME_SIZE,
 					  GFP_KERNEL);