@@ -5,6 +5,8 @@
readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)"
+BPF_FILE="../bpf/xdp_dummy.bpf.o"
+
# set global exit status, but never reset nonzero one.
check_err()
{
@@ -34,7 +36,7 @@ cfg_veth() {
ip -netns "${PEER_NS}" addr add dev veth1 192.168.1.1/24
ip -netns "${PEER_NS}" addr add dev veth1 2001:db8::1/64 nodad
ip -netns "${PEER_NS}" link set dev veth1 up
- ip -n "${PEER_NS}" link set veth1 xdp object ../bpf/xdp_dummy.o section xdp
+ ip -n "${PEER_NS}" link set veth1 xdp object ${BPF_FILE} section xdp
}
run_one() {
@@ -195,8 +197,8 @@ run_all() {
return $ret
}
-if [ ! -f ../bpf/xdp_dummy.o ]; then
- echo "Missing xdp_dummy helper. Build bpf selftest first"
+if [ ! -f ${BPF_FILE} ]; then
+ echo "Missing ${BPF_FILE}. Build bpf selftest first"
exit -1
fi
@@ -5,6 +5,8 @@
readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)"
+BPF_FILE="../bpf/xdp_dummy.bpf.o"
+
cleanup() {
local -r jobs="$(jobs -p)"
local -r ns="$(ip netns list|grep $PEER_NS)"
@@ -34,7 +36,7 @@ run_one() {
ip -netns "${PEER_NS}" addr add dev veth1 2001:db8::1/64 nodad
ip -netns "${PEER_NS}" link set dev veth1 up
- ip -n "${PEER_NS}" link set veth1 xdp object ../bpf/xdp_dummy.o section xdp
+ ip -n "${PEER_NS}" link set veth1 xdp object ${BPF_FILE} section xdp
ip netns exec "${PEER_NS}" ./udpgso_bench_rx ${rx_args} -r &
ip netns exec "${PEER_NS}" ./udpgso_bench_rx -t ${rx_args} -r &
@@ -80,8 +82,8 @@ run_all() {
run_udp "${ipv6_args}"
}
-if [ ! -f ../bpf/xdp_dummy.o ]; then
- echo "Missing xdp_dummy helper. Build bpf selftest first"
+if [ ! -f ${BPF_FILE} ]; then
+ echo "Missing ${BPF_FILE}. Build bpf selftest first"
exit -1
fi
@@ -5,6 +5,8 @@
readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)"
+BPF_FILE="../bpf/xdp_dummy.bpf.o"
+
cleanup() {
local -r jobs="$(jobs -p)"
local -r ns="$(ip netns list|grep $PEER_NS)"
@@ -36,7 +38,7 @@ run_one() {
ip netns exec "${PEER_NS}" ethtool -K veth1 rx-gro-list on
- ip -n "${PEER_NS}" link set veth1 xdp object ../bpf/xdp_dummy.o section xdp
+ ip -n "${PEER_NS}" link set veth1 xdp object ${BPF_FILE} section xdp
tc -n "${PEER_NS}" qdisc add dev veth1 clsact
tc -n "${PEER_NS}" filter add dev veth1 ingress prio 4 protocol ipv6 bpf object-file ../bpf/nat6to4.o section schedcls/ingress6/nat_6 direct-action
tc -n "${PEER_NS}" filter add dev veth1 egress prio 4 protocol ip bpf object-file ../bpf/nat6to4.o section schedcls/egress4/snat4 direct-action
@@ -81,8 +83,8 @@ run_all() {
run_udp "${ipv6_args}"
}
-if [ ! -f ../bpf/xdp_dummy.o ]; then
- echo "Missing xdp_dummy helper. Build bpf selftest first"
+if [ ! -f ${BPF_FILE} ]; then
+ echo "Missing ${BPF_FILE}. Build bpf selftest first"
exit -1
fi
@@ -1,6 +1,7 @@
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
+BPF_FILE="../bpf/xdp_dummy.bpf.o"
readonly BASE="ns-$(mktemp -u XXXXXX)"
readonly SRC=2
readonly DST=1
@@ -46,7 +47,7 @@ create_ns() {
ip -n $BASE$ns addr add dev veth$ns $BM_NET_V4$ns/24
ip -n $BASE$ns addr add dev veth$ns $BM_NET_V6$ns/64 nodad
done
- ip -n $NS_DST link set veth$DST xdp object ../bpf/xdp_dummy.o section xdp 2>/dev/null
+ ip -n $NS_DST link set veth$DST xdp object ${BPF_FILE} section xdp 2>/dev/null
}
create_vxlan_endpoint() {
@@ -1,6 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
+BPF_FILE="../bpf/xdp_dummy.bpf.o"
readonly STATS="$(mktemp -p /tmp ns-XXXXXX)"
readonly BASE=`basename $STATS`
readonly SRC=2
@@ -216,8 +217,8 @@ while getopts "hs:" option; do
esac
done
-if [ ! -f ../bpf/xdp_dummy.o ]; then
- echo "Missing xdp_dummy helper. Build bpf selftest first"
+if [ ! -f ${BPF_FILE} ]; then
+ echo "Missing ${BPF_FILE}. Build bpf selftest first"
exit 1
fi
@@ -288,14 +289,14 @@ if [ $CPUS -gt 1 ]; then
ip netns exec $NS_DST ethtool -L veth$DST rx 1 tx 2 2>/dev/null
ip netns exec $NS_SRC ethtool -L veth$SRC rx 1 tx 2 2>/dev/null
printf "%-60s" "bad setting: XDP with RX nr less than TX"
- ip -n $NS_DST link set dev veth$DST xdp object ../bpf/xdp_dummy.o \
+ ip -n $NS_DST link set dev veth$DST xdp object ${BPF_FILE} \
section xdp 2>/dev/null &&\
echo "fail - set operation successful ?!?" || echo " ok "
# the following tests will run with multiple channels active
ip netns exec $NS_SRC ethtool -L veth$SRC rx 2
ip netns exec $NS_DST ethtool -L veth$DST rx 2
- ip -n $NS_DST link set dev veth$DST xdp object ../bpf/xdp_dummy.o \
+ ip -n $NS_DST link set dev veth$DST xdp object ${BPF_FILE} \
section xdp 2>/dev/null
printf "%-60s" "bad setting: reducing RX nr below peer TX with XDP set"
ip netns exec $NS_DST ethtool -L veth$DST rx 1 2>/dev/null &&\
@@ -311,7 +312,7 @@ if [ $CPUS -gt 2 ]; then
chk_channels "setting invalid channels nr" $DST 2 2
fi
-ip -n $NS_DST link set dev veth$DST xdp object ../bpf/xdp_dummy.o section xdp 2>/dev/null
+ip -n $NS_DST link set dev veth$DST xdp object ${BPF_FILE} section xdp 2>/dev/null
chk_gro_flag "with xdp attached - gro flag" $DST on
chk_gro_flag " - peer gro flag" $SRC off
chk_tso_flag " - tso flag" $SRC off
After commit afef88e65554 ("selftests/bpf: Store BPF object files with .bpf.o extension"), we should use xdp_dummy.bpf.o instade of xdp_dummy.o. In addition, use the BPF_FILE variable to save the BPF object file name, which can be better identified and modified. Fixes: afef88e65554 ("selftests/bpf: Store BPF object files with .bpf.o extension") Signed-off-by: Wang Yufen <wangyufen@huawei.com> Cc: Daniel Müller <deso@posteo.net> --- tools/testing/selftests/net/udpgro.sh | 8 +++++--- tools/testing/selftests/net/udpgro_bench.sh | 8 +++++--- tools/testing/selftests/net/udpgro_frglist.sh | 8 +++++--- tools/testing/selftests/net/udpgro_fwd.sh | 3 ++- tools/testing/selftests/net/veth.sh | 11 ++++++----- 5 files changed, 23 insertions(+), 15 deletions(-)