From patchwork Mon Sep 18 19:16:54 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Radhey Shyam Pandey X-Patchwork-Id: 13390289 X-Patchwork-Delegate: kuba@kernel.org Received: from lindbergh.monkeyblade.net (lindbergh.monkeyblade.net [23.128.96.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 78671273F3; Mon, 18 Sep 2023 19:17:59 +0000 (UTC) Received: from NAM10-DM6-obe.outbound.protection.outlook.com (mail-dm6nam10on2066.outbound.protection.outlook.com [40.107.93.66]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 549EA10F; Mon, 18 Sep 2023 12:17:56 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=FHKFIQxtWL3pMf69FKlZOAu3bhO8rrbH9kGQWkcrramQyjFUKJ5DRk60Kq84zE/OJgBf/MbmTcMXAmo4/HShwIH8lmzWHeUS2dbQ/MgClzOM5r/u1sqrKbbft2IDKl0B+HEbuHqKEopqt/Q19lrU50u7O9JUjsCzC1UBatJ/5N9KqOZ3OWGWV5DDCHHt8K3KL3xgSH0/zbfVJYz2VhsrQSos3wIsaaLrg6beDfWa2P/zQd/MGye7vt9+XZXAhLJ2S8u1559wUTdtDkrlzFqgEEBBt4kutsgwSVQFeon2wSgcCrBLo9BlEO4kDNnJgS0r2sduTAkJFFBn0L/ENgB4Ig== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=5b9lbGrSneFLL/82Oj3t8xsgJOla3I9kzswtqPL2f1M=; b=PudiJ9x/5pzfeMHORDIzonx8VFoJ26vZPGxBHsNyUIhO8gE8nk4GnKTeQqaeCV2np/4b2gz/jj0wYC4g+MvCjQ/dgt3V1f8QKz1IYvU8ax4Q1R2CcsehuD/Zx2K2PSR+s7735sSulu18OyDdu1qw4AOB7d8j2p/GHAHakJ7FbXl4jMjj95iLo+TTAUopT59002HF1k0MhB9bgQfq7fVuAoPlJlX+CYSOUxuc8ojE3+4s2vfz0kcCQsEgMdN6alzDQOsy55jIrN1wkI80IlhVtSOn0uKYzVvj+Uh2Eguq8fbQrZi7U6X9586WcGQ1B7iWU34zqKYZOYkvfP4lXuDPmA== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 165.204.84.17) smtp.rcpttodomain=davemloft.net smtp.mailfrom=amd.com; dmarc=pass (p=quarantine sp=quarantine pct=100) action=none header.from=amd.com; dkim=none (message not signed); arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=amd.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=5b9lbGrSneFLL/82Oj3t8xsgJOla3I9kzswtqPL2f1M=; b=J/ktq+krZLqpc33jNUS3oMvGk9nmB4QpFnq43iG3mIdHMyOR41A+nZjycZYtsryFGP5DmfpwawGZHEb4bJimGhD0dG9UB76vprkOFR+dQ5JqzwyXBYEV2yjGa1HOtG8fnXFML4pz3lEuILEERMQXPzkAmoy4cJrcqQpHU0TNrZg= Received: from BYAPR11CA0053.namprd11.prod.outlook.com (2603:10b6:a03:80::30) by DM4PR12MB6112.namprd12.prod.outlook.com (2603:10b6:8:aa::7) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6792.25; Mon, 18 Sep 2023 19:17:52 +0000 Received: from CO1PEPF000042AC.namprd03.prod.outlook.com (2603:10b6:a03:80:cafe::28) by BYAPR11CA0053.outlook.office365.com (2603:10b6:a03:80::30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6792.27 via Frontend Transport; Mon, 18 Sep 2023 19:17:52 +0000 X-MS-Exchange-Authentication-Results: spf=pass (sender IP is 165.204.84.17) smtp.mailfrom=amd.com; dkim=none (message not signed) header.d=none;dmarc=pass action=none header.from=amd.com; Received-SPF: Pass (protection.outlook.com: domain of amd.com designates 165.204.84.17 as permitted sender) receiver=protection.outlook.com; client-ip=165.204.84.17; helo=SATLEXMB04.amd.com; pr=C Received: from SATLEXMB04.amd.com (165.204.84.17) by CO1PEPF000042AC.mail.protection.outlook.com (10.167.243.41) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.20.6792.20 via Frontend Transport; Mon, 18 Sep 2023 19:17:51 +0000 Received: from SATLEXMB08.amd.com (10.181.40.132) by SATLEXMB04.amd.com (10.181.40.145) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.27; Mon, 18 Sep 2023 14:17:44 -0500 Received: from SATLEXMB03.amd.com (10.181.40.144) by SATLEXMB08.amd.com (10.181.40.132) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.27; Mon, 18 Sep 2023 12:17:35 -0700 Received: from xhdradheys41.xilinx.com (10.180.168.240) by SATLEXMB03.amd.com (10.181.40.144) with Microsoft SMTP Server id 15.1.2507.27 via Frontend Transport; Mon, 18 Sep 2023 14:17:31 -0500 From: Radhey Shyam Pandey To: , , , , , , , , , CC: , , , , , Sarath Babu Naidu Gaddam Subject: [PATCH net-next v6 2/3] net: axienet: Preparatory changes for dmaengine support Date: Tue, 19 Sep 2023 00:46:54 +0530 Message-ID: <1695064615-3164315-3-git-send-email-radhey.shyam.pandey@amd.com> X-Mailer: git-send-email 2.1.1 In-Reply-To: <1695064615-3164315-1-git-send-email-radhey.shyam.pandey@amd.com> References: <1695064615-3164315-1-git-send-email-radhey.shyam.pandey@amd.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: CO1PEPF000042AC:EE_|DM4PR12MB6112:EE_ X-MS-Office365-Filtering-Correlation-Id: db34a3e3-ddca-4012-7338-08dbb87bf444 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: dDUDlfBlFPBqOalHG9NHWhDd4od2fiHdGdXsptky4uZ+zhRCEfJX3zGww+1shI/Er9ZGpwhvJE4JMO/8ZTOkQulVSaLj/B2m9l9qFS+9RF8RZIreQ/gW45Skb12W2XX+KTV1FgmHjAU5ZJbEyfgyAPsIgRIqsXjP7i/f0HcEZ1R3CplwyW+UNgfqXJ2FTlUvBRh2FYjRZvEaqQGsVjsoMPCemxy7NbqVcNinByjUojwSIC+crCsFjKP2bAKeFRoOzYir/3lg1wIS/o59JS4xZSSrm1D084xI5K0X4ZwafCTzpyEdDDiJgBVe/fAdLRkvEqYYEQoVdu+LXF3mbC1NsBgN+Ujvp73o+wOgEvH4w/WOh4LD8p4Pqox0v+020Q/3WpyxQvtXcTX30xoutPMZtO+kw827ULovsE+401uDD4GLwS8BzjeDXmh9v0VwJOwbaPHJsgjPNrPuWsxZ7W9joTByew+hiJf+juxyawwFC8CHZ+jzIPuTrBW7mhsulhajBiu+oA2/i5Lzc0gEYcht+CQIqXRexo6U1neBEQkrpFxRf8zffXanX9/9Zux9g5LN3BBk802GAu9XvLxSI/T0gw9R9WCb4eOHpu/K3SG+4UVrlZzJGglHCNPcwfC5luVg1mnlBUQ8pkGWw/2z8NKEH0ekblHbzeT9XyQNNP/WMYVp5B6k1OL+v5h2JmG7spdcqDPUkBoy3in6DgVBqt+R1gzLtq0xofFwOrp4wYqF58xBlBjnpfzy2wiXUeDqoIbZBKfxGGSvadb/aced6UzQPum1nWWMYBuozwi8rp1fqOs= X-Forefront-Antispam-Report: CIP:165.204.84.17;CTRY:US;LANG:en;SCL:1;SRV:;IPV:CAL;SFV:NSPM;H:SATLEXMB04.amd.com;PTR:InfoDomainNonexistent;CAT:NONE;SFS:(13230031)(4636009)(376002)(396003)(39860400002)(346002)(136003)(82310400011)(1800799009)(186009)(451199024)(36840700001)(40470700004)(46966006)(6666004)(478600001)(30864003)(83380400001)(2616005)(26005)(336012)(426003)(47076005)(2906002)(54906003)(7416002)(316002)(70206006)(70586007)(110136005)(41300700001)(8676002)(4326008)(8936002)(5660300002)(40460700003)(356005)(40480700001)(36860700001)(36756003)(86362001)(921005)(81166007)(82740400003)(36900700001);DIR:OUT;SFP:1101; X-OriginatorOrg: amd.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 18 Sep 2023 19:17:51.9953 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: db34a3e3-ddca-4012-7338-08dbb87bf444 X-MS-Exchange-CrossTenant-Id: 3dd8961f-e488-4e60-8e11-a82d994e183d X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=3dd8961f-e488-4e60-8e11-a82d994e183d;Ip=[165.204.84.17];Helo=[SATLEXMB04.amd.com] X-MS-Exchange-CrossTenant-AuthSource: CO1PEPF000042AC.namprd03.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: DM4PR12MB6112 X-Spam-Status: No, score=-1.1 required=5.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,FORGED_SPF_HELO, RCVD_IN_DNSWL_BLOCKED,RCVD_IN_MSPIKE_H2,SPF_HELO_PASS,SPF_NONE autolearn=no autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net X-Patchwork-Delegate: kuba@kernel.org From: Sarath Babu Naidu Gaddam The axiethernet driver has inbuilt dma programming. In order to add dmaengine support and make it's integration seamless the current axidma inbuilt programming code is put under use_dmaengine check. It also performs minor code reordering to minimize conditional use_dmaengine checks and there is no functional change. It uses "dmas" property to identify whether it should use a dmaengine framework or inbuilt axidma programming. Signed-off-by: Sarath Babu Naidu Gaddam Signed-off-by: Radhey Shyam Pandey --- Changes for v6: - None Changes for v5: - Fix git apply failure due to commit f1bc9fc4a06de0108e0dca2a9a7e99ba1fc632f9 Changes for v4: - Renamed has_dmas to use_dmaegine. - Removed the AXIENET_USE_DMA. - Changed the start_xmit_** functions description. Changes for v3: - New patch --- drivers/net/ethernet/xilinx/xilinx_axienet.h | 2 + .../net/ethernet/xilinx/xilinx_axienet_main.c | 313 +++++++++++------- 2 files changed, 188 insertions(+), 127 deletions(-) diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h index 575ff9de8985..3ead0bac597b 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet.h +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h @@ -435,6 +435,7 @@ struct axidma_bd { * @coalesce_usec_rx: IRQ coalesce delay for RX * @coalesce_count_tx: Store the irq coalesce on TX side. * @coalesce_usec_tx: IRQ coalesce delay for TX + * @use_dmaengine: flag to check dmaengine framework usage. */ struct axienet_local { struct net_device *ndev; @@ -499,6 +500,7 @@ struct axienet_local { u32 coalesce_usec_rx; u32 coalesce_count_tx; u32 coalesce_usec_tx; + u8 use_dmaengine; }; /** diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index b7ec4dafae90..67901700e296 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -589,10 +589,6 @@ static int axienet_device_reset(struct net_device *ndev) struct axienet_local *lp = netdev_priv(ndev); int ret; - ret = __axienet_device_reset(lp); - if (ret) - return ret; - lp->max_frm_size = XAE_MAX_VLAN_FRAME_SIZE; lp->options |= XAE_OPTION_VLAN; lp->options &= (~XAE_OPTION_JUMBO); @@ -606,11 +602,17 @@ static int axienet_device_reset(struct net_device *ndev) lp->options |= XAE_OPTION_JUMBO; } - ret = axienet_dma_bd_init(ndev); - if (ret) { - netdev_err(ndev, "%s: descriptor allocation failed\n", - __func__); - return ret; + if (!lp->use_dmaengine) { + ret = __axienet_device_reset(lp); + if (ret) + return ret; + + ret = axienet_dma_bd_init(ndev); + if (ret) { + netdev_err(ndev, "%s: descriptor allocation failed\n", + __func__); + return ret; + } } axienet_status = axienet_ior(lp, XAE_RCW1_OFFSET); @@ -776,20 +778,20 @@ static int axienet_tx_poll(struct napi_struct *napi, int budget) } /** - * axienet_start_xmit - Starts the transmission. + * axienet_start_xmit_legacy - Starts the transmission. * @skb: sk_buff pointer that contains data to be Txed. * @ndev: Pointer to net_device structure. * * Return: NETDEV_TX_OK, on success * NETDEV_TX_BUSY, if any of the descriptors are not free * - * This function is invoked from upper layers to initiate transmission. The + * This function is invoked from axienet_start_xmit to initiate transmission. The * function uses the next available free BDs and populates their fields to * start the transmission. Additionally if checksum offloading is supported, * it populates AXI Stream Control fields with appropriate values. */ static netdev_tx_t -axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev) +axienet_start_xmit_legacy(struct sk_buff *skb, struct net_device *ndev) { u32 ii; u32 num_frag; @@ -891,6 +893,27 @@ axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev) return NETDEV_TX_OK; } +/** + * axienet_start_xmit - Invoke the transmission function + * @skb: sk_buff pointer that contains data to be Txed. + * @ndev: Pointer to net_device structure. + * + * Return: NETDEV_TX_OK, on success + * NETDEV_TX_BUSY, if any of the descriptors are not free + * + * This function is invoked from upper layers to initiate transmission + */ +static netdev_tx_t +axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev) +{ + struct axienet_local *lp = netdev_priv(ndev); + + if (!lp->use_dmaengine) + return axienet_start_xmit_legacy(skb, ndev); + else + return NETDEV_TX_BUSY; +} + /** * axienet_rx_poll - Triggered by RX ISR to complete the BD processing. * @napi: Pointer to NAPI structure. @@ -1125,41 +1148,22 @@ static irqreturn_t axienet_eth_irq(int irq, void *_ndev) static void axienet_dma_err_handler(struct work_struct *work); /** - * axienet_open - Driver open routine. - * @ndev: Pointer to net_device structure + * axienet_init_legacy_dma - init the dma legacy code. + * @ndev: Pointer to net_device structure * * Return: 0, on success. - * non-zero error value on failure + * non-zero error value on failure + * + * This is the dma initialization code. It also allocates interrupt + * service routines, enables the interrupt lines and ISR handling. * - * This is the driver open routine. It calls phylink_start to start the - * PHY device. - * It also allocates interrupt service routines, enables the interrupt lines - * and ISR handling. Axi Ethernet core is reset through Axi DMA core. Buffer - * descriptors are initialized. */ -static int axienet_open(struct net_device *ndev) + +static inline int axienet_init_legacy_dma(struct net_device *ndev) { int ret; struct axienet_local *lp = netdev_priv(ndev); - dev_dbg(&ndev->dev, "axienet_open()\n"); - - /* When we do an Axi Ethernet reset, it resets the complete core - * including the MDIO. MDIO must be disabled before resetting. - * Hold MDIO bus lock to avoid MDIO accesses during the reset. - */ - axienet_lock_mii(lp); - ret = axienet_device_reset(ndev); - axienet_unlock_mii(lp); - - ret = phylink_of_phy_connect(lp->phylink, lp->dev->of_node, 0); - if (ret) { - dev_err(lp->dev, "phylink_of_phy_connect() failed: %d\n", ret); - return ret; - } - - phylink_start(lp->phylink); - /* Enable worker thread for Axi DMA error handling */ INIT_WORK(&lp->dma_err_task, axienet_dma_err_handler); @@ -1193,13 +1197,62 @@ static int axienet_open(struct net_device *ndev) err_tx_irq: napi_disable(&lp->napi_tx); napi_disable(&lp->napi_rx); - phylink_stop(lp->phylink); - phylink_disconnect_phy(lp->phylink); cancel_work_sync(&lp->dma_err_task); dev_err(lp->dev, "request_irq() failed\n"); return ret; } +/** + * axienet_open - Driver open routine. + * @ndev: Pointer to net_device structure + * + * Return: 0, on success. + * non-zero error value on failure + * + * This is the driver open routine. It calls phylink_start to start the + * PHY device. + * It also allocates interrupt service routines, enables the interrupt lines + * and ISR handling. Axi Ethernet core is reset through Axi DMA core. Buffer + * descriptors are initialized. + */ +static int axienet_open(struct net_device *ndev) +{ + int ret; + struct axienet_local *lp = netdev_priv(ndev); + + dev_dbg(&ndev->dev, "%s\n", __func__); + + /* When we do an Axi Ethernet reset, it resets the complete core + * including the MDIO. MDIO must be disabled before resetting. + * Hold MDIO bus lock to avoid MDIO accesses during the reset. + */ + axienet_lock_mii(lp); + ret = axienet_device_reset(ndev); + axienet_unlock_mii(lp); + + ret = phylink_of_phy_connect(lp->phylink, lp->dev->of_node, 0); + if (ret) { + dev_err(lp->dev, "phylink_of_phy_connect() failed: %d\n", ret); + return ret; + } + + phylink_start(lp->phylink); + + if (!lp->use_dmaengine) { + ret = axienet_init_legacy_dma(ndev); + if (ret) + goto error_code; + } + + return 0; + +error_code: + phylink_stop(lp->phylink); + phylink_disconnect_phy(lp->phylink); + + return ret; +} + /** * axienet_stop - Driver stop routine. * @ndev: Pointer to net_device structure @@ -1216,8 +1269,10 @@ static int axienet_stop(struct net_device *ndev) dev_dbg(&ndev->dev, "axienet_close()\n"); - napi_disable(&lp->napi_tx); - napi_disable(&lp->napi_rx); + if (!lp->use_dmaengine) { + napi_disable(&lp->napi_tx); + napi_disable(&lp->napi_rx); + } phylink_stop(lp->phylink); phylink_disconnect_phy(lp->phylink); @@ -1225,18 +1280,18 @@ static int axienet_stop(struct net_device *ndev) axienet_setoptions(ndev, lp->options & ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN)); - axienet_dma_stop(lp); + if (!lp->use_dmaengine) { + axienet_dma_stop(lp); + cancel_work_sync(&lp->dma_err_task); + free_irq(lp->tx_irq, ndev); + free_irq(lp->rx_irq, ndev); + axienet_dma_bd_release(ndev); + } axienet_iow(lp, XAE_IE_OFFSET, 0); - cancel_work_sync(&lp->dma_err_task); - if (lp->eth_irq > 0) free_irq(lp->eth_irq, ndev); - free_irq(lp->tx_irq, ndev); - free_irq(lp->rx_irq, ndev); - - axienet_dma_bd_release(ndev); return 0; } @@ -1412,14 +1467,16 @@ static void axienet_ethtools_get_regs(struct net_device *ndev, data[29] = axienet_ior(lp, XAE_FMI_OFFSET); data[30] = axienet_ior(lp, XAE_AF0_OFFSET); data[31] = axienet_ior(lp, XAE_AF1_OFFSET); - data[32] = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); - data[33] = axienet_dma_in32(lp, XAXIDMA_TX_SR_OFFSET); - data[34] = axienet_dma_in32(lp, XAXIDMA_TX_CDESC_OFFSET); - data[35] = axienet_dma_in32(lp, XAXIDMA_TX_TDESC_OFFSET); - data[36] = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); - data[37] = axienet_dma_in32(lp, XAXIDMA_RX_SR_OFFSET); - data[38] = axienet_dma_in32(lp, XAXIDMA_RX_CDESC_OFFSET); - data[39] = axienet_dma_in32(lp, XAXIDMA_RX_TDESC_OFFSET); + if (!lp->use_dmaengine) { + data[32] = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); + data[33] = axienet_dma_in32(lp, XAXIDMA_TX_SR_OFFSET); + data[34] = axienet_dma_in32(lp, XAXIDMA_TX_CDESC_OFFSET); + data[35] = axienet_dma_in32(lp, XAXIDMA_TX_TDESC_OFFSET); + data[36] = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); + data[37] = axienet_dma_in32(lp, XAXIDMA_RX_SR_OFFSET); + data[38] = axienet_dma_in32(lp, XAXIDMA_RX_CDESC_OFFSET); + data[39] = axienet_dma_in32(lp, XAXIDMA_RX_TDESC_OFFSET); + } } static void @@ -1880,9 +1937,6 @@ static int axienet_probe(struct platform_device *pdev) u64_stats_init(&lp->rx_stat_sync); u64_stats_init(&lp->tx_stat_sync); - netif_napi_add(ndev, &lp->napi_rx, axienet_rx_poll); - netif_napi_add(ndev, &lp->napi_tx, axienet_tx_poll); - lp->axi_clk = devm_clk_get_optional(&pdev->dev, "s_axi_lite_clk"); if (!lp->axi_clk) { /* For backward compatibility, if named AXI clock is not present, @@ -2008,80 +2062,85 @@ static int axienet_probe(struct platform_device *pdev) goto cleanup_clk; } - /* Find the DMA node, map the DMA registers, and decode the DMA IRQs */ - np = of_parse_phandle(pdev->dev.of_node, "axistream-connected", 0); - if (np) { - struct resource dmares; + if (!of_find_property(pdev->dev.of_node, "dmas", NULL)) { + /* Find the DMA node, map the DMA registers, and decode the DMA IRQs */ + np = of_parse_phandle(pdev->dev.of_node, "axistream-connected", 0); - ret = of_address_to_resource(np, 0, &dmares); - if (ret) { - dev_err(&pdev->dev, - "unable to get DMA resource\n"); + if (np) { + struct resource dmares; + + ret = of_address_to_resource(np, 0, &dmares); + if (ret) { + dev_err(&pdev->dev, + "unable to get DMA resource\n"); + of_node_put(np); + goto cleanup_clk; + } + lp->dma_regs = devm_ioremap_resource(&pdev->dev, + &dmares); + lp->rx_irq = irq_of_parse_and_map(np, 1); + lp->tx_irq = irq_of_parse_and_map(np, 0); of_node_put(np); + lp->eth_irq = platform_get_irq_optional(pdev, 0); + } else { + /* Check for these resources directly on the Ethernet node. */ + lp->dma_regs = devm_platform_get_and_ioremap_resource(pdev, 1, NULL); + lp->rx_irq = platform_get_irq(pdev, 1); + lp->tx_irq = platform_get_irq(pdev, 0); + lp->eth_irq = platform_get_irq_optional(pdev, 2); + } + if (IS_ERR(lp->dma_regs)) { + dev_err(&pdev->dev, "could not map DMA regs\n"); + ret = PTR_ERR(lp->dma_regs); + goto cleanup_clk; + } + if (lp->rx_irq <= 0 || lp->tx_irq <= 0) { + dev_err(&pdev->dev, "could not determine irqs\n"); + ret = -ENOMEM; goto cleanup_clk; } - lp->dma_regs = devm_ioremap_resource(&pdev->dev, - &dmares); - lp->rx_irq = irq_of_parse_and_map(np, 1); - lp->tx_irq = irq_of_parse_and_map(np, 0); - of_node_put(np); - lp->eth_irq = platform_get_irq_optional(pdev, 0); - } else { - /* Check for these resources directly on the Ethernet node. */ - lp->dma_regs = devm_platform_get_and_ioremap_resource(pdev, 1, NULL); - lp->rx_irq = platform_get_irq(pdev, 1); - lp->tx_irq = platform_get_irq(pdev, 0); - lp->eth_irq = platform_get_irq_optional(pdev, 2); - } - if (IS_ERR(lp->dma_regs)) { - dev_err(&pdev->dev, "could not map DMA regs\n"); - ret = PTR_ERR(lp->dma_regs); - goto cleanup_clk; - } - if ((lp->rx_irq <= 0) || (lp->tx_irq <= 0)) { - dev_err(&pdev->dev, "could not determine irqs\n"); - ret = -ENOMEM; - goto cleanup_clk; - } - /* Reset core now that clocks are enabled, prior to accessing MDIO */ - ret = __axienet_device_reset(lp); - if (ret) - goto cleanup_clk; + /* Reset core now that clocks are enabled, prior to accessing MDIO */ + ret = __axienet_device_reset(lp); + if (ret) + goto cleanup_clk; + + /* Autodetect the need for 64-bit DMA pointers. + * When the IP is configured for a bus width bigger than 32 bits, + * writing the MSB registers is mandatory, even if they are all 0. + * We can detect this case by writing all 1's to one such register + * and see if that sticks: when the IP is configured for 32 bits + * only, those registers are RES0. + * Those MSB registers were introduced in IP v7.1, which we check first. + */ + if ((axienet_ior(lp, XAE_ID_OFFSET) >> 24) >= 0x9) { + void __iomem *desc = lp->dma_regs + XAXIDMA_TX_CDESC_OFFSET + 4; - /* Autodetect the need for 64-bit DMA pointers. - * When the IP is configured for a bus width bigger than 32 bits, - * writing the MSB registers is mandatory, even if they are all 0. - * We can detect this case by writing all 1's to one such register - * and see if that sticks: when the IP is configured for 32 bits - * only, those registers are RES0. - * Those MSB registers were introduced in IP v7.1, which we check first. - */ - if ((axienet_ior(lp, XAE_ID_OFFSET) >> 24) >= 0x9) { - void __iomem *desc = lp->dma_regs + XAXIDMA_TX_CDESC_OFFSET + 4; - - iowrite32(0x0, desc); - if (ioread32(desc) == 0) { /* sanity check */ - iowrite32(0xffffffff, desc); - if (ioread32(desc) > 0) { - lp->features |= XAE_FEATURE_DMA_64BIT; - addr_width = 64; - dev_info(&pdev->dev, - "autodetected 64-bit DMA range\n"); - } iowrite32(0x0, desc); + if (ioread32(desc) == 0) { /* sanity check */ + iowrite32(0xffffffff, desc); + if (ioread32(desc) > 0) { + lp->features |= XAE_FEATURE_DMA_64BIT; + addr_width = 64; + dev_info(&pdev->dev, + "autodetected 64-bit DMA range\n"); + } + iowrite32(0x0, desc); + } + } + if (!IS_ENABLED(CONFIG_64BIT) && lp->features & XAE_FEATURE_DMA_64BIT) { + dev_err(&pdev->dev, "64-bit addressable DMA is not compatible with 32-bit archecture\n"); + ret = -EINVAL; + goto cleanup_clk; } - } - if (!IS_ENABLED(CONFIG_64BIT) && lp->features & XAE_FEATURE_DMA_64BIT) { - dev_err(&pdev->dev, "64-bit addressable DMA is not compatible with 32-bit archecture\n"); - ret = -EINVAL; - goto cleanup_clk; - } - ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(addr_width)); - if (ret) { - dev_err(&pdev->dev, "No suitable DMA available\n"); - goto cleanup_clk; + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(addr_width)); + if (ret) { + dev_err(&pdev->dev, "No suitable DMA available\n"); + goto cleanup_clk; + } + netif_napi_add(ndev, &lp->napi_rx, axienet_rx_poll); + netif_napi_add(ndev, &lp->napi_tx, axienet_tx_poll); } /* Check for Ethernet core IRQ (optional) */ @@ -2099,8 +2158,8 @@ static int axienet_probe(struct platform_device *pdev) } lp->coalesce_count_rx = XAXIDMA_DFT_RX_THRESHOLD; - lp->coalesce_usec_rx = XAXIDMA_DFT_RX_USEC; lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD; + lp->coalesce_usec_rx = XAXIDMA_DFT_RX_USEC; lp->coalesce_usec_tx = XAXIDMA_DFT_TX_USEC; ret = axienet_mdio_setup(lp);