@@ -775,25 +775,7 @@ static int enetc_mdio_probe(struct enetc_pf *pf, struct device_node *np)
return 0;
}
-static int enetc_mdiobus_create(struct enetc_pf *pf)
-{
- struct device *dev = &pf->si->pdev->dev;
- struct device_node *mdio_np;
- int err;
-
- mdio_np = of_get_child_by_name(dev->of_node, "mdio");
- if (mdio_np) {
- err = enetc_mdio_probe(pf, mdio_np);
-
- of_node_put(mdio_np);
- if (err)
- return err;
- }
-
- return 0;
-}
-
-static void enetc_mdiobus_destroy(struct enetc_pf *pf)
+static void enetc_mdio_remove(struct enetc_pf *pf)
{
if (pf->mdio)
mdiobus_unregister(pf->mdio);
@@ -844,7 +826,7 @@ static void enetc_of_put_phy(struct enetc_pf *pf)
of_node_put(pf->phy_node);
}
-static int enetc_imdio_init(struct enetc_pf *pf, bool is_c45)
+static int enetc_imdio_create(struct enetc_pf *pf)
{
struct device *dev = &pf->si->pdev->dev;
struct enetc_mdio_priv *mdio_priv;
@@ -872,7 +854,7 @@ static int enetc_imdio_init(struct enetc_pf *pf, bool is_c45)
goto free_mdio_bus;
}
- pcs = get_phy_device(bus, 0, is_c45);
+ pcs = get_phy_device(bus, 0, pf->if_mode == PHY_INTERFACE_MODE_USXGMII);
if (IS_ERR(pcs)) {
err = PTR_ERR(pcs);
dev_err(dev, "cannot get internal PCS PHY (%d)\n", err);
@@ -901,6 +883,45 @@ static void enetc_imdio_remove(struct enetc_pf *pf)
}
}
+static bool enetc_port_has_pcs(struct enetc_pf *pf)
+{
+ return (pf->if_mode == PHY_INTERFACE_MODE_SGMII ||
+ pf->if_mode == PHY_INTERFACE_MODE_2500BASEX ||
+ pf->if_mode == PHY_INTERFACE_MODE_USXGMII);
+}
+
+static int enetc_mdiobus_create(struct enetc_pf *pf)
+{
+ struct device *dev = &pf->si->pdev->dev;
+ struct device_node *mdio_np;
+ int err;
+
+ mdio_np = of_get_child_by_name(dev->of_node, "mdio");
+ if (mdio_np) {
+ err = enetc_mdio_probe(pf, mdio_np);
+
+ of_node_put(mdio_np);
+ if (err)
+ return err;
+ }
+
+ if (enetc_port_has_pcs(pf)) {
+ err = enetc_imdio_create(pf);
+ if (err) {
+ enetc_mdio_remove(pf);
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+static void enetc_mdiobus_destroy(struct enetc_pf *pf)
+{
+ enetc_mdio_remove(pf);
+ enetc_imdio_remove(pf);
+}
+
static void enetc_configure_sgmii(struct phy_device *pcs)
{
/* SGMII spec requires tx_config_Reg[15:0] to be exactly 0x4001
@@ -940,22 +961,9 @@ static void enetc_configure_usxgmii(struct phy_device *pcs)
BMCR_RESET | BMCR_ANENABLE | BMCR_ANRESTART);
}
-static int enetc_configure_serdes(struct enetc_ndev_priv *priv)
+static void enetc_configure_serdes(struct enetc_pf *pf)
{
- bool is_c45 = priv->if_mode == PHY_INTERFACE_MODE_USXGMII;
- struct enetc_pf *pf = enetc_si_priv(priv->si);
- int err;
-
- if (priv->if_mode != PHY_INTERFACE_MODE_SGMII &&
- priv->if_mode != PHY_INTERFACE_MODE_2500BASEX &&
- priv->if_mode != PHY_INTERFACE_MODE_USXGMII)
- return 0;
-
- err = enetc_imdio_init(pf, is_c45);
- if (err)
- return err;
-
- switch (priv->if_mode) {
+ switch (pf->if_mode) {
case PHY_INTERFACE_MODE_SGMII:
enetc_configure_sgmii(pf->pcs);
break;
@@ -966,18 +974,9 @@ static int enetc_configure_serdes(struct enetc_ndev_priv *priv)
enetc_configure_usxgmii(pf->pcs);
break;
default:
- dev_err(&pf->si->pdev->dev, "Unsupported link mode %s\n",
- phy_modes(priv->if_mode));
+ dev_dbg(&pf->si->pdev->dev, "Unsupported link mode %s\n",
+ phy_modes(pf->if_mode));
}
-
- return 0;
-}
-
-static void enetc_teardown_serdes(struct enetc_ndev_priv *priv)
-{
- struct enetc_pf *pf = enetc_si_priv(priv->si);
-
- enetc_imdio_remove(pf);
}
static int enetc_pf_probe(struct pci_dev *pdev,
@@ -1052,9 +1051,8 @@ static int enetc_pf_probe(struct pci_dev *pdev,
if (err)
goto err_mdiobus_create;
- err = enetc_configure_serdes(priv);
- if (err)
- goto err_configure_serdes;
+ if (enetc_port_has_pcs(pf))
+ enetc_configure_serdes(pf);
enetc_mac_config(&pf->si->hw, pf->if_mode);
}
@@ -1068,8 +1066,6 @@ static int enetc_pf_probe(struct pci_dev *pdev,
return 0;
err_reg_netdev:
- enetc_teardown_serdes(priv);
-err_configure_serdes:
enetc_mdiobus_destroy(pf);
err_mdiobus_create:
enetc_of_put_phy(pf);
@@ -1094,7 +1090,6 @@ static void enetc_pf_remove(struct pci_dev *pdev)
struct enetc_ndev_priv *priv;
priv = netdev_priv(si->ndev);
- enetc_teardown_serdes(priv);
enetc_mdiobus_destroy(pf);
enetc_of_put_phy(pf);
Decouple internal mdio bus creation from serdes configuration, as a prerequisite to offloading serdes configuration to a different module. Group together mdio bus creation routines, cleanup. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> --- v2: none .../net/ethernet/freescale/enetc/enetc_pf.c | 101 +++++++++--------- 1 file changed, 48 insertions(+), 53 deletions(-)