@@ -871,6 +871,45 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb)
return 0;
}
+static int fr_snap_parse(struct sk_buff *skb, struct pvc_device *pvc)
+{
+ /* OUI 00-00-00 indicates an Ethertype follows */
+ if (skb->data[0] == 0x00 &&
+ skb->data[1] == 0x00 &&
+ skb->data[2] == 0x00) {
+ if (!pvc->main)
+ return -1;
+ skb->dev = pvc->main;
+ skb->protocol = *(__be16 *)(skb->data + 3); /* Ethertype */
+ skb_pull(skb, 5);
+ skb_reset_mac_header(skb);
+ return 0;
+
+ /* OUI 00-80-C2 stands for the 802.1 organization */
+ } else if (skb->data[0] == 0x00 &&
+ skb->data[1] == 0x80 &&
+ skb->data[2] == 0xC2) {
+ /* PID 00-07 stands for Ethernet frames without FCS */
+ if (skb->data[3] == 0x00 &&
+ skb->data[4] == 0x07) {
+ if (!pvc->ether)
+ return -1;
+ skb_pull(skb, 5);
+ if (skb->len < ETH_HLEN)
+ return -1;
+ skb->protocol = eth_type_trans(skb, pvc->ether);
+ return 0;
+
+ /* PID unsupported */
+ } else {
+ return -1;
+ }
+
+ /* OUI unsupported */
+ } else {
+ return -1;
+ }
+}
static int fr_rx(struct sk_buff *skb)
{
@@ -880,9 +919,9 @@ static int fr_rx(struct sk_buff *skb)
u8 *data = skb->data;
u16 dlci;
struct pvc_device *pvc;
- struct net_device *dev = NULL;
+ struct net_device *dev;
- if (skb->len <= 4 || fh->ea1 || data[2] != FR_UI)
+ if (skb->len < 4 || fh->ea1 || !fh->ea2 || data[2] != FR_UI)
goto rx_error;
dlci = q922_to_dlci(skb->data);
@@ -904,8 +943,7 @@ static int fr_rx(struct sk_buff *skb)
netdev_info(frad, "No PVC for received frame's DLCI %d\n",
dlci);
#endif
- dev_kfree_skb_any(skb);
- return NET_RX_DROP;
+ goto rx_drop;
}
if (pvc->state.fecn != fh->fecn) {
@@ -931,63 +969,52 @@ static int fr_rx(struct sk_buff *skb)
}
if (data[3] == NLPID_IP) {
+ if (!pvc->main)
+ goto rx_drop;
skb_pull(skb, 4); /* Remove 4-byte header (hdr, UI, NLPID) */
- dev = pvc->main;
+ skb->dev = pvc->main;
skb->protocol = htons(ETH_P_IP);
+ skb_reset_mac_header(skb);
} else if (data[3] == NLPID_IPV6) {
+ if (!pvc->main)
+ goto rx_drop;
skb_pull(skb, 4); /* Remove 4-byte header (hdr, UI, NLPID) */
- dev = pvc->main;
+ skb->dev = pvc->main;
skb->protocol = htons(ETH_P_IPV6);
+ skb_reset_mac_header(skb);
- } else if (skb->len > 10 && data[3] == FR_PAD &&
- data[4] == NLPID_SNAP && data[5] == FR_PAD) {
- u16 oui = ntohs(*(__be16*)(data + 6));
- u16 pid = ntohs(*(__be16*)(data + 8));
- skb_pull(skb, 10);
-
- switch ((((u32)oui) << 16) | pid) {
- case ETH_P_ARP: /* routed frame with SNAP */
- case ETH_P_IPX:
- case ETH_P_IP: /* a long variant */
- case ETH_P_IPV6:
- dev = pvc->main;
- skb->protocol = htons(pid);
- break;
-
- case 0x80C20007: /* bridged Ethernet frame */
- if ((dev = pvc->ether) != NULL)
- skb->protocol = eth_type_trans(skb, dev);
- break;
-
- default:
- netdev_info(frad, "Unsupported protocol, OUI=%x PID=%x\n",
- oui, pid);
- dev_kfree_skb_any(skb);
- return NET_RX_DROP;
+ } else if (data[3] == FR_PAD) {
+ if (skb->len < 5)
+ goto rx_error;
+ if (data[4] == NLPID_SNAP) { /* A SNAP header follows */
+ skb_pull(skb, 5);
+ if (skb->len < 5) /* Incomplete SNAP header */
+ goto rx_error;
+ if (fr_snap_parse(skb, pvc))
+ goto rx_drop;
+ } else {
+ goto rx_drop;
}
+
} else {
netdev_info(frad, "Unsupported protocol, NLPID=%x length=%i\n",
data[3], skb->len);
- dev_kfree_skb_any(skb);
- return NET_RX_DROP;
+ goto rx_drop;
}
- if (dev) {
- dev->stats.rx_packets++; /* PVC traffic */
- dev->stats.rx_bytes += skb->len;
- if (pvc->state.becn)
- dev->stats.rx_compressed++;
- skb->dev = dev;
- netif_rx(skb);
- return NET_RX_SUCCESS;
- } else {
- dev_kfree_skb_any(skb);
- return NET_RX_DROP;
- }
+ dev = skb->dev;
+ dev->stats.rx_packets++; /* PVC traffic */
+ dev->stats.rx_bytes += skb->len;
+ if (pvc->state.becn)
+ dev->stats.rx_compressed++;
+ netif_rx(skb);
+ return NET_RX_SUCCESS;
- rx_error:
+rx_error:
frad->stats.rx_errors++; /* Mark error */
+rx_drop:
+ frad->stats.rx_dropped++;
dev_kfree_skb_any(skb);
return NET_RX_DROP;
}
1. Change the fr_rx function to make this driver support any Ethertype when receiving. (This driver is already able to handle any Ethertype when sending.) Originally in the fr_rx function, the code that parses the long (10-byte) header only recognizes a few Ethertype values and drops frames with other Ethertype values. This patch replaces this code to make fr_rx support any Ethertype. This patch also creates a new function fr_snap_parse as part of the new code. 2. Change the use of the "dev" variable in fr_rx. Originally we do "dev = something", and then at the end do "if (dev) skb->dev = dev". Now we do "if (something) skb->dev = something", then at the end do "dev = skb->dev". This is to make the logic of our code consistent with eth_type_trans (which we call). The eth_type_trans function expects a non-NULL pointer as a parameter and assigns it directly to skb->dev. 3. Change the initial skb->len check in fr_fx from "<= 4" to "< 4". At first we only need to ensure a 4-byte header is present. We indeed normally need the 5th byte, too, but it'd be more logical to check its existence when we actually need it. Also add an fh->ea2 check to the initial checks in fr_fx. fh->ea2 == 1 means the second address byte is the final address byte. We only support the case where the address length is 2 bytes. 4. Use "goto rx_drop" whenever we need to drop a valid frame. Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Xie He <xie.he.0141@gmail.com> --- drivers/net/wan/hdlc_fr.c | 119 +++++++++++++++++++++++--------------- 1 file changed, 73 insertions(+), 46 deletions(-)