From patchwork Tue Oct 20 17:12:21 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dan Murphy X-Patchwork-Id: 11847471 X-Patchwork-Delegate: kuba@kernel.org Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-12.8 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS, URIBL_BLOCKED,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id B6DF4C4363A for ; Tue, 20 Oct 2020 17:12:55 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 451F42222D for ; Tue, 20 Oct 2020 17:12:55 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b="A7ylHbuw" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2395300AbgJTRMu (ORCPT ); Tue, 20 Oct 2020 13:12:50 -0400 Received: from fllv0016.ext.ti.com ([198.47.19.142]:56250 "EHLO fllv0016.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2395279AbgJTRMt (ORCPT ); Tue, 20 Oct 2020 13:12:49 -0400 Received: from fllv0035.itg.ti.com ([10.64.41.0]) by fllv0016.ext.ti.com (8.15.2/8.15.2) with ESMTP id 09KHCi09128377; Tue, 20 Oct 2020 12:12:44 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1603213964; bh=5QEI7kdYhdh8YyqlvyoCJy8L1ATpOfC65IFrTY0awAE=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=A7ylHbuwXICoCISThlxJXjaOiu9Ua+kYRIAzlL5u9MY9rruVqih0EBTEcYBPIu/2Y iphfgcUHkMc46PGgmVGRHgkT/luFn+Tl8DDJJbMG4CaAFpTL/0yECpudSjywgbqHzy Ngeuij5nOz/DuMaxvhFZZ3/597FyqpEFRurNwLlw= Received: from DLEE108.ent.ti.com (dlee108.ent.ti.com [157.170.170.38]) by fllv0035.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 09KHCiMP099110 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Tue, 20 Oct 2020 12:12:44 -0500 Received: from DLEE104.ent.ti.com (157.170.170.34) by DLEE108.ent.ti.com (157.170.170.38) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Tue, 20 Oct 2020 12:12:43 -0500 Received: from fllv0039.itg.ti.com (10.64.41.19) by DLEE104.ent.ti.com (157.170.170.34) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Tue, 20 Oct 2020 12:12:43 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by fllv0039.itg.ti.com (8.15.2/8.15.2) with ESMTP id 09KHChUh009684; Tue, 20 Oct 2020 12:12:43 -0500 From: Dan Murphy To: , , , CC: , , Dan Murphy Subject: [PATCH net-next v2 3/3] net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY Date: Tue, 20 Oct 2020 12:12:21 -0500 Message-ID: <20201020171221.730-4-dmurphy@ti.com> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20201020171221.730-1-dmurphy@ti.com> References: <20201020171221.730-1-dmurphy@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org X-Patchwork-Delegate: kuba@kernel.org The DP83TD510E is an ultra-low power Ethernet physical layer transceiver that supports 10M single pair cable. The device supports both 2.4-V p2p and 1-V p2p output voltage as defined by IEEE 802.3cg 10Base-T1L specfications. These modes can be forced via the device tree or the device is defaulted to auto negotiation to determine the proper p2p voltage. Signed-off-by: Dan Murphy --- drivers/net/phy/Kconfig | 6 + drivers/net/phy/Makefile | 1 + drivers/net/phy/dp83td510.c | 600 ++++++++++++++++++++++++++++++++++++ 3 files changed, 607 insertions(+) create mode 100644 drivers/net/phy/dp83td510.c diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 698bea312adc..017252e1504c 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -302,6 +302,12 @@ config DP83869_PHY Currently supports the DP83869 PHY. This PHY supports copper and fiber connections. +config DP83TD510_PHY + tristate "Texas Instruments DP83TD510 10M Single Pair Ethernet PHY" + help + Support for the DP83TD510 Ethernet PHY. This PHY supports a 10M single + pair Ethernet connection. + config VITESSE_PHY tristate "Vitesse PHYs" help diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index a13e402074cf..bf62ce211eb4 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_DP83848_PHY) += dp83848.o obj-$(CONFIG_DP83867_PHY) += dp83867.o obj-$(CONFIG_DP83869_PHY) += dp83869.o obj-$(CONFIG_DP83TC811_PHY) += dp83tc811.o +obj-$(CONFIG_DP83TD510_PHY) += dp83td510.o obj-$(CONFIG_FIXED_PHY) += fixed_phy.o obj-$(CONFIG_ICPLUS_PHY) += icplus.o obj-$(CONFIG_INTEL_XWAY_PHY) += intel-xway.o diff --git a/drivers/net/phy/dp83td510.c b/drivers/net/phy/dp83td510.c new file mode 100644 index 000000000000..756497c592bc --- /dev/null +++ b/drivers/net/phy/dp83td510.c @@ -0,0 +1,600 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Driver for the Texas Instruments DP83TD510 PHY + * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DP83TD510E_PHY_ID 0x20000180 +#define DP83TD510_DEVADDR_AN 0x7 +#define DP83TD510_DEVADDR 0x1f + +#define DP83TD510_MII_REG 0x0 +#define DP83TD510_PHY_STAT 0x10 +#define DP83TD510_GEN_CFG 0x11 +#define DP83TD510_INT_REG1 0x12 +#define DP83TD510_INT_REG2 0x13 +#define DP83TD510_MAC_CFG_1 0x17 + +#define DP83TD510_SOR_1 0x467 + +#define DP83TD510_HW_RESET BIT(15) +#define DP83TD510_SW_RESET BIT(14) + +/* GEN CFG bits */ +#define DP83TD510_INT_OE BIT(0) +#define DP83TD510_INT_EN BIT(1) + +/* INT REG 1 bits */ +#define DP83TD510_INT1_ESD_EN BIT(3) +#define DP83TD510_INT1_LINK_EN BIT(5) +#define DP83TD510_INT1_RHF_EN BIT(7) +#define DP83TD510_INT1_ESD BIT(11) +#define DP83TD510_INT1_LINK BIT(13) +#define DP83TD510_INT1_RHF BIT(15) + +/* INT REG 2 bits */ +#define DP83TD510_INT2_POR_EN BIT(0) +#define DP83TD510_INT2_POL_EN BIT(1) +#define DP83TD510_INT2_PAGE_EN BIT(5) +#define DP83TD510_INT2_POR BIT(8) +#define DP83TD510_INT2_POL BIT(9) +#define DP83TD510_INT2_PAGE BIT(13) + +/* MAC CFG bits */ +#define DP83TD510_RX_CLK_SHIFT BIT(12) +#define DP83TD510_TX_CLK_SHIFT BIT(11) + +#define DP83TD510_MASTER_MODE BIT(2) +#define DP83TD510_2_4V BIT(7) +#define DP83TD510_RGMII BIT(8) + +#define DP83TD510_FIFO_DEPTH_MASK GENMASK(6, 5) +#define DP83TD510_FIFO_DEPTH_4_B_NIB 0 +#define DP83TD510_FIFO_DEPTH_5_B_NIB BIT(5) +#define DP83TD510_FIFO_DEPTH_6_B_NIB BIT(6) +#define DP83TD510_FIFO_DEPTH_8_B_NIB (BIT(5) | BIT(6)) + +enum dp83td510_mode_config { + DP83TD510_AUTO_NEG = 0, + DP83TD510_MASTER_1 = 1, + DP83TD510_MASTER_24 = 2, + DP83TD510_SLAVE_1 = 3, + DP83TD510_SLAVE_24 = 4, +}; + +const int dp83td510_feature_array[3] = { + ETHTOOL_LINK_MODE_10baseT1L_Half_BIT, + ETHTOOL_LINK_MODE_10baseT1L_Full_BIT, + ETHTOOL_LINK_MODE_TP_BIT, +}; + +struct dp83td510_private { + u32 forced_mode; + u32 tx_fifo_depth; + u32 rgmii_delay; + bool is_rgmii; +}; + +struct dp83td510_init_reg { + int reg; + int val; +}; + +static struct dp83td510_init_reg dp83td510_master_1_0[] = { + { 0x000d, 0x0007 }, /* disable auto-neg */ + { 0x000e, 0x0200 }, + { 0x000d, 0x4007 }, + { 0x000e, 0x0000 }, + { 0x000d, 0x0001 }, /* force master mode */ + { 0x000e, 0x0834 }, + { 0x000d, 0x4001 }, + { 0x000e, 0x4000 }, + { 0x000d, 0x0001 }, /* force 1.0v swing */ + { 0x000e, 0x08f6 }, + { 0x000d, 0x4001 }, + { 0x000e, 0x0000 }, + { 0x0608, 0x003b }, /* disable_0_transition */ + { 0x0862, 0x39f8 }, /* AGC Gain during Autoneg */ + { 0x081a, 0x67c0 }, /* deq offset for 1V swing */ + { 0x081c, 0xfb62 }, /* deq offset for 2.4V swing */ + { 0x0830, 0x05a3 }, /* Enable energy lost fallback */ + { 0x0855, 0x1b55 }, /* MSE Threshold change */ + { 0x0831, 0x0403 }, /* energy detect threshold */ + { 0x0856, 0x1800 }, /* good1 MSE threshold change */ + { 0x0857, 0x8fa0 }, /* Enable fallback to phase 1 on watchdog trigger */ + { 0x0871, 0x000c }, /* TED input changed to slicer_in without FFE */ + { 0x0883, 0x022e }, /* Enable Rx Filter, Change PGA threshold for Short Cable detection */ + { 0x0402, 0x1800 }, /* Adjusr LD swing */ + { 0x0878, 0x2248 }, /* Change PI up/down polarity */ + { 0x010c, 0x0008 }, /* tx filter coefficient */ + { 0x0112, 0x1212 }, /* tx filter scaling factor */ + { 0x0809, 0x5c80 }, /* AGC retrain */ + { 0x0803, 0x1529 }, /* Master Ph1 Back-off */ + { 0x0804, 0x1a33 }, /* Master Ph1 Back-off */ + { 0x0805, 0x1f3d }, /* Master Ph1 Back-off */ + { 0x0850, 0x045b }, /* hybrid gain & delay */ + { 0x0874, 0x6967 }, /* kp step 0 for master */ + { 0x0852, 0x7800 }, /* FAGC init gain */ + { 0x0806, 0x1e1e }, /* Master/Slave Ph2 Back-off */ + { 0x0807, 0x2525 }, /* Master/Slave Ph2 Back-off */ + { 0x0808, 0x2c2c }, /* Master/Slave Ph2 Back-off */ + { 0x0850, 0x0590 }, /* Hybrid Gain/Delay Code */ + { 0x0827, 0x4000 }, /* Echo Fixed Delay */ + { 0x0849, 0x0fe4 }, /* Hybrid Cal enable */ + { 0x084b, 0x04b5 }, /* Echo Score Sel */ + { 0x0018, 0x0043 }, /* Set CRS/RX_DV pin as RX_DV for RMII repeater mode */ +}; + +static struct dp83td510_init_reg dp83td510_slave_1_0[] = { + { 0x000d, 0x0007 }, /* disable auto-neg */ + { 0x000e, 0x0200 }, + { 0x000d, 0x4007 }, + { 0x000e, 0x0000 }, + { 0x000d, 0x0001 }, /* force slave mode */ + { 0x000e, 0x0834 }, + { 0x000d, 0x4001 }, + { 0x000e, 0x0000 }, + { 0x000d, 0x0001 }, /* force 1.0v swing */ + { 0x000d, 0x4001 }, + { 0x000e, 0x0000 }, + { 0x0608, 0x003b }, /* disable_0_transition */ + { 0x0862, 0x39f8 }, /* AGC Gain during Autoneg */ + { 0x081a, 0x67c0 }, /* deq offset for 1V swing */ + { 0x081c, 0xfb62 }, /* deq offset for 2.4V swing */ + { 0x0830, 0x05a3 }, /* Enable energy lost fallback */ + { 0x0855, 0x1b55 }, /* MSE Threshold change */ + { 0x0831, 0x0403 }, /* energy detect threshold */ + { 0x0856, 0x1800 }, /* good1 MSE threshold change */ + { 0x0857, 0x8fa0 }, /* Enable fallback to phase 1 on watchdog trigger */ + { 0x0871, 0x000c }, /* TED input changed to slicer_in without FFE */ + { 0x0883, 0x022e }, /* Enable Rx Filter, PGA threshold for Short Cable detection */ + { 0x0402, 0x1800 }, /* Adjusr LD swing */ + { 0x0878, 0x2248 }, /* Change PI up/down polarity */ + { 0x010c, 0x0008 }, /* tx filter coefficient */ + { 0x0112, 0x1212 }, /* tx filter scaling factor */ + { 0x0809, 0x5c80 }, /* AGC retrain */ + { 0x0803, 0x1529 }, /* Master Ph1 Back-off */ + { 0x0804, 0x1a33 }, /* Master Ph1 Back-off */ + { 0x0805, 0x1f3d }, /* Master Ph1 Back-off */ + { 0x0850, 0x045b }, /* hybrid gain & delay */ + { 0x0874, 0x6967 }, /* kp step 0 for master */ + { 0x0852, 0x7800 }, /* FAGC init gain */ + { 0x0806, 0x1e1e }, /* Master/Slave Ph2 Back-off */ + { 0x0807, 0x2525 }, /* Master/Slave Ph2 Back-off */ + { 0x0808, 0x2c2c }, /* Master/Slave Ph2 Back-off */ + { 0x0850, 0x0590 }, /* Hybrid Gain/Delay Code */ + { 0x0827, 0x4000 }, /* Echo Fixed Delay */ + { 0x0849, 0x0fe4 }, /* Hybrid Cal enable */ + { 0x084b, 0x04b5 }, /* Echo Score Sel */ + { 0x0018, 0x0043 }, /* Set CRS/RX_DV pin as RX_DV for RMII repeater mode */ +}; + +static struct dp83td510_init_reg dp83td510_master_2_4[] = { + { 0x000d, 0x0007 }, /* disable auto-neg */ + { 0x000e, 0x0200 }, + { 0x000d, 0x4007 }, + { 0x000e, 0x0000 }, + { 0x000d, 0x0001 }, /* force Master mode */ + { 0x000e, 0x0834 }, + { 0x000d, 0x4001 }, + { 0x000e, 0x4000 }, + { 0x000d, 0x0001 }, /* force 2.4v swing */ + { 0x000e, 0x08f6 }, + { 0x000d, 0x4001 }, + { 0x000e, 0x1000 }, + { 0x0608, 0x003b }, /* disable_0_transition */ + { 0x0862, 0x39f8 }, /* AGC Gain during Autoneg */ + { 0x081a, 0x67c0 }, /* deq offset for 1V swing */ + { 0x081c, 0xfb62 }, /* deq offset for 2.4V swing */ + { 0x0830, 0x05a3 }, /* Enable energy lost fallback */ + { 0x0855, 0x1b55 }, /* MSE Threshold change */ + { 0x0831, 0x0403 }, /* energy detect threshold */ + { 0x0856, 0x1800 }, /* good1 MSE threshold change */ + { 0x0857, 0x8fa0 }, /* Enable fallback to phase 1 on watchdog trigger */ + { 0x0871, 0x000c }, /* TED input changed to slicer_in without FFE */ + { 0x0883, 0x022e }, /* Enable Rx Filter, Change PGA threshold for Short Cable detection */ + { 0x0402, 0x1800 }, /* Adjusr LD swing */ + { 0x0878, 0x2248 }, /* Change PI up/down polarity */ + { 0x010c, 0x0008 }, /* tx filter coefficient */ + { 0x0112, 0x1212 }, /* tx filter scaling factor */ + { 0x0809, 0x5c80 }, /* AGC retrain */ + { 0x0803, 0x1529 }, /* Master Ph1 Back-off */ + { 0x0804, 0x1a33 }, /* Master Ph1 Back-off */ + { 0x0805, 0x1f3d }, /* Master Ph1 Back-off */ + { 0x0850, 0x045b }, /* hybrid gain & delay */ + { 0x0874, 0x6967 }, /* kp step 0 for master */ + { 0x0852, 0x7800 }, /* FAGC init gain */ + { 0x0806, 0x1e1e }, /* Master/Slave Ph2 Back-off */ + { 0x0807, 0x2525 }, /* Master/Slave Ph2 Back-off */ + { 0x0808, 0x2c2c }, /* Master/Slave Ph2 Back-off */ + { 0x0850, 0x0590 }, /* Hybrid Gain/Delay Code */ + { 0x0827, 0x4000 }, /* Echo Fixed Delay */ + { 0x0849, 0x0fe4 }, /* Hybrid Cal enable */ + { 0x084b, 0x04b5 }, /* Echo Score Sel */ + { 0x0018, 0x0043 }, /* Set CRS/RX_DV pin as RX_DV for RMII repeater mode */ +}; + +static struct dp83td510_init_reg dp83td510_slave_2_4[] = { + { 0x000d, 0x0007}, /* disable auto-neg */ + { 0x000e, 0x0200}, + { 0x000d, 0x4007}, + { 0x000e, 0x0000}, + { 0x000d, 0x0001}, /* force slave mode */ + { 0x000e, 0x0834}, + { 0x000d, 0x4001}, + { 0x000e, 0x0000}, + { 0x000d, 0x0001}, /* force 2.4v swing */ + { 0x000e, 0x08f6}, + { 0x000d, 0x4001}, + { 0x000e, 0x1000}, + { 0x0608, 0x003b}, /* disable_0_transition */ + { 0x0862, 0x39f8}, /* AGC Gain during Autoneg */ + { 0x081a, 0x67c0}, /* deq offset for 1V swing */ + { 0x081c, 0xfb62}, /* deq offset for 2.4V swing */ + { 0x0830, 0x05a3}, /* Enable energy lost fallback */ + { 0x0855, 0x1b55}, /* MSE Threshold change */ + { 0x0831, 0x0403}, /* energy detect threshold */ + { 0x0856, 0x1800}, /* good1 MSE threshold change */ + { 0x0857, 0x8fa0}, /* Enable fallback to phase 1 on watchdog trigger */ + { 0x0871, 0x000c}, /* TED input changed to slicer_in without FFE */ + { 0x0883, 0x022e}, /* Enable Rx Filter, Change PGA threshold for Short Cable detection */ + { 0x0402, 0x1800}, /* Adjusr LD swing */ + { 0x0878, 0x2248}, /* Change PI up/down polarity */ + { 0x010c, 0x0008}, /* tx filter coefficient */ + { 0x0112, 0x1212}, /* tx filter scaling factor */ + { 0x0809, 0x5c80}, /* AGC retrain */ + { 0x0803, 0x1529}, /* Master Ph1 Back-off */ + { 0x0804, 0x1a33}, /* Master Ph1 Back-off */ + { 0x0805, 0x1f3d}, /* Master Ph1 Back-off */ + { 0x0850, 0x045b}, /* hybrid gain & delay */ + { 0x0874, 0x6967}, /* kp step 0 for master */ + { 0x0852, 0x7800}, /* FAGC init gain */ + { 0x0806, 0x1e1e}, /* Master/Slave Ph2 Back-off */ + { 0x0807, 0x2525}, /* Master/Slave Ph2 Back-off */ + { 0x0808, 0x2c2c}, /* Master/Slave Ph2 Back-off */ + { 0x0850, 0x0590}, /* Hybrid Gain/Delay Code */ + { 0x0827, 0x4000}, /* Echo Fixed Delay */ + { 0x0849, 0x0fe4}, /* Hybrid Cal enable */ + { 0x084b, 0x04b5}, /* Echo Score Sel */ + { 0x0018, 0x0043}, /* Set CRS/RX_DV pin as RX_DV for RMII repeater mode */ +}; + +static struct dp83td510_init_reg dp83td510_auto_neg[] = { + { 0x608, 0x003b }, /* disable_0_transition */ + { 0x862, 0x39f8 }, /* AGC Gain during Autoneg */ + { 0x81a, 0x67c0 }, /* deq offset for 1V swing */ + { 0x81c, 0xfb62 }, /* deq offset for 2.4V swing */ + { 0x830, 0x05a3 }, /* Enable energy lost fallback */ + { 0x855, 0x1b55 }, /* MSE Threshold change */ + { 0x831, 0x0403 }, /* energy detect threshold */ + { 0x856, 0x1800 }, /* good1 MSE threshold change */ + { 0x857, 0x8fa0 }, /* Enable fallback to phase 1 on watchdog trigger */ + { 0x871, 0x000c }, /* TED input changed to slicer_in without FFE */ + { 0x883, 0x022e }, /* Enable Rx Filter Change PGA threshold for Short Cable detection */ + { 0x402, 0x1800 }, /* Adjusr LD swing */ + { 0x878, 0x2248 }, /* Change PI up/down polarity */ + { 0x10c, 0x0008 }, /* tx filter coefficient */ + { 0x112, 0x1212 }, /* tx filter scaling factor */ + { 0x809, 0x5c80 }, /* AGC retrain */ + { 0x803, 0x1529 }, /* Master Ph1 Back-off */ + { 0x804, 0x1a33 }, /* Master Ph1 Back-off */ + { 0x805, 0x1f3d }, /* Master Ph1 Back-off */ + { 0x850, 0x045b }, /* hybrid gain & delay */ + { 0x874, 0x6967 }, /* kp step 0 for master */ + { 0x852, 0x7800 }, /* FAGC init gain */ + { 0x806, 0x1e1e }, /* Master/Slave Ph2 Back-off */ + { 0x807, 0x2525 }, /* Master/Slave Ph2 Back-off */ + { 0x808, 0x2c2c }, /* Master/Slave Ph2 Back-off */ + { 0x850, 0x0590 }, /* Hybrid Gain/Delay Code */ + { 0x827, 0x4000 }, /* Echo Fixed Delay */ + { 0x849, 0x0fe4 }, /* Hybrid Cal enable */ + { 0x84b, 0x04b5 }, /* Echo Score Sel */ + { 0x018, 0x0043 }, /* Set CRS/RX_DV pin as RX_DV for RMII repeater mode */ +}; + +static int dp83td510_ack_interrupt(struct phy_device *phydev) +{ + int ret; + + ret = phy_read(phydev, DP83TD510_INT_REG1); + if (ret < 0) + return ret; + + ret = phy_read(phydev, DP83TD510_INT_REG2); + if (ret < 0) + return ret; + + return 0; +} + +static int dp83td510_config_intr(struct phy_device *phydev) +{ + int int_status; + int gen_cfg_val; + int ret; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { + int_status = phy_read(phydev, DP83TD510_INT_REG1); + if (int_status < 0) + return int_status; + + int_status = (DP83TD510_INT1_ESD_EN | DP83TD510_INT1_LINK_EN | + DP83TD510_INT1_RHF_EN); + + ret = phy_write(phydev, DP83TD510_INT_REG1, int_status); + if (ret) + return ret; + + int_status = phy_read(phydev, DP83TD510_INT_REG2); + if (int_status < 0) + return int_status; + + int_status = (DP83TD510_INT2_POR | DP83TD510_INT2_POL | + DP83TD510_INT2_PAGE); + + ret = phy_write(phydev, DP83TD510_INT_REG2, int_status); + if (ret) + return ret; + + gen_cfg_val = phy_read(phydev, DP83TD510_GEN_CFG); + if (gen_cfg_val < 0) + return gen_cfg_val; + + gen_cfg_val |= DP83TD510_INT_OE | DP83TD510_INT_EN; + + } else { + ret = phy_write(phydev, DP83TD510_INT_REG1, 0); + if (ret) + return ret; + + ret = phy_write(phydev, DP83TD510_INT_REG2, 0); + if (ret) + return ret; + + gen_cfg_val = phy_read(phydev, DP83TD510_GEN_CFG); + if (gen_cfg_val < 0) + return gen_cfg_val; + + gen_cfg_val &= ~DP83TD510_INT_EN; + } + + return phy_write(phydev, DP83TD510_GEN_CFG, gen_cfg_val); +} + +static int dp83td510_configure_mode(struct phy_device *phydev) +{ + struct dp83td510_private *dp83td510 = phydev->priv; + struct dp83td510_init_reg *init_data; + int size; + int ret; + int i; + + ret = phy_set_bits(phydev, DP83TD510_MII_REG, DP83TD510_HW_RESET); + if (ret < 0) + return ret; + + switch (dp83td510->forced_mode) { + case DP83TD510_MASTER_1: + size = ARRAY_SIZE(dp83td510_master_1_0); + init_data = dp83td510_master_1_0; + break; + case DP83TD510_MASTER_24: + size = ARRAY_SIZE(dp83td510_master_2_4); + init_data = dp83td510_master_2_4; + break; + case DP83TD510_SLAVE_1: + size = ARRAY_SIZE(dp83td510_slave_1_0); + init_data = dp83td510_slave_1_0; + break; + case DP83TD510_SLAVE_24: + size = ARRAY_SIZE(dp83td510_slave_2_4); + init_data = dp83td510_slave_2_4; + break; + case DP83TD510_AUTO_NEG: + default: + size = ARRAY_SIZE(dp83td510_auto_neg); + init_data = dp83td510_auto_neg; + break; + }; + + for (i = 0; i < size; i++) { + ret = phy_write_mmd(phydev, DP83TD510_DEVADDR, init_data[i].reg, + init_data[i].val); + if (ret) + return ret; + } + + return phy_set_bits(phydev, DP83TD510_MII_REG, DP83TD510_SW_RESET); +} + +static int dp83td510_get_features(struct phy_device *phydev) +{ + struct dp83td510_private *dp83td510 = phydev->priv; + + linkmode_set_bit_array(dp83td510_feature_array, + ARRAY_SIZE(dp83td510_feature_array), + phydev->supported); + + if (dp83td510->forced_mode == DP83TD510_AUTO_NEG) + linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported); + + return 0; +} + +static int dp83td510_config_init(struct phy_device *phydev) +{ + struct dp83td510_private *dp83td510 = phydev->priv; + int ret = 0; + + if (phy_interface_is_rgmii(phydev)) { + if (dp83td510->rgmii_delay) { + ret = phy_set_bits_mmd(phydev, DP83TD510_DEVADDR, + DP83TD510_MAC_CFG_1, dp83td510->rgmii_delay); + if (ret) + return ret; + } + } + + if (phydev->interface == PHY_INTERFACE_MODE_RMII) { + ret = phy_modify(phydev, DP83TD510_GEN_CFG, + DP83TD510_FIFO_DEPTH_MASK, + dp83td510->tx_fifo_depth); + if (ret) + return ret; + } + + return dp83td510_configure_mode(phydev); +} + +static int dp83td510_phy_reset(struct phy_device *phydev) +{ + int ret; + + ret = phy_set_bits(phydev, DP83TD510_MII_REG, DP83TD510_SW_RESET); + if (ret < 0) + return ret; + + usleep_range(10, 20); + + return dp83td510_config_init(phydev); +} + +static int dp83td510_read_straps(struct phy_device *phydev) +{ + struct dp83td510_private *dp83td510 = phydev->priv; + int strap; + + strap = phy_read_mmd(phydev, DP83TD510_DEVADDR, DP83TD510_SOR_1); + if (strap < 0) + return strap; + + if (strap & DP83TD510_RGMII) + dp83td510->is_rgmii = true; + + return 0; +}; + +#if IS_ENABLED(CONFIG_OF_MDIO) +static int dp83td510_of_init(struct phy_device *phydev) +{ + struct dp83td510_private *dp83td510 = phydev->priv; + struct device *dev = &phydev->mdio.dev; + struct device_node *of_node = dev->of_node; + s32 rx_int_delay; + s32 tx_int_delay; + int ret; + + if (!of_node) + return -ENODEV; + + ret = dp83td510_read_straps(phydev); + if (ret) + return ret; + + ret = device_property_read_u32(&phydev->mdio.dev, "ti,master-slave-mode", + &dp83td510->forced_mode); + if (ret) + dp83td510->forced_mode = DP83TD510_AUTO_NEG; + + if (dp83td510->forced_mode < DP83TD510_AUTO_NEG || + dp83td510->forced_mode > DP83TD510_SLAVE_24) + return -EINVAL; + + if (device_property_read_u32(&phydev->mdio.dev, "tx-fifo-depth", + &dp83td510->tx_fifo_depth)) + dp83td510->tx_fifo_depth = DP83TD510_FIFO_DEPTH_5_B_NIB; + + switch (dp83td510->tx_fifo_depth) { + case 4: + dp83td510->tx_fifo_depth = DP83TD510_FIFO_DEPTH_4_B_NIB; + break; + case 5: + dp83td510->tx_fifo_depth = DP83TD510_FIFO_DEPTH_5_B_NIB; + break; + case 6: + dp83td510->tx_fifo_depth = DP83TD510_FIFO_DEPTH_6_B_NIB; + break; + case 8: + dp83td510->tx_fifo_depth = DP83TD510_FIFO_DEPTH_8_B_NIB; + break; + default: + return -EINVAL; + } + + rx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0, true); + if (rx_int_delay <= 0) + dp83td510->rgmii_delay = DP83TD510_RX_CLK_SHIFT; + else + dp83td510->rgmii_delay = 0; + + tx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0, false); + if (tx_int_delay <= 0) + dp83td510->rgmii_delay |= DP83TD510_TX_CLK_SHIFT; + else + dp83td510->rgmii_delay &= ~DP83TD510_TX_CLK_SHIFT; + + return ret; +} +#else +static int dp83869_of_init(struct phy_device *phydev) +{ + return dp83td510_read_straps(phydev); +} +#endif /* CONFIG_OF_MDIO */ + +static int dp83td510_probe(struct phy_device *phydev) +{ + struct dp83td510_private *dp83td510; + int ret; + + dp83td510 = devm_kzalloc(&phydev->mdio.dev, sizeof(*dp83td510), GFP_KERNEL); + if (!dp83td510) + return -ENOMEM; + + phydev->priv = dp83td510; + + ret = dp83td510_of_init(phydev); + if (ret) + return ret; + + return dp83td510_config_init(phydev); +} + +static struct phy_driver dp83td510_driver[] = { + { + PHY_ID_MATCH_MODEL(DP83TD510E_PHY_ID), + .name = "TI DP83TD510E", + .probe = dp83td510_probe, + .config_init = dp83td510_config_init, + .soft_reset = dp83td510_phy_reset, + + /* IRQ related */ + .ack_interrupt = dp83td510_ack_interrupt, + .config_intr = dp83td510_config_intr, + + .get_features = dp83td510_get_features, + + .suspend = genphy_suspend, + .resume = genphy_resume, + }, +}; +module_phy_driver(dp83td510_driver); + +static struct mdio_device_id __maybe_unused dp83td510_tbl[] = { + { PHY_ID_MATCH_MODEL(DP83TD510E_PHY_ID) }, + { } +}; +MODULE_DEVICE_TABLE(mdio, dp83td510_tbl); + +MODULE_DESCRIPTION("Texas Instruments DP83TD510E PHY driver"); +MODULE_AUTHOR("Dan Murphy