| Message ID | 20201028214012.9712-3-l.stelmach@samsung.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [v4,1/5] dt-bindings: vendor-prefixes: Add asix prefix | expand |
On Wed, 28 Oct 2020 22:40:09 +0100, Łukasz Stelmach wrote: > Add bindings for AX88796C SPI Ethernet Adapter. > > Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> > --- > .../bindings/net/asix,ax88796c.yaml | 69 +++++++++++++++++++ > 1 file changed, 69 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/asix,ax88796c.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/net/asix,ax88796c.example.dts:23.13-25: Warning (reg_format): /example-0/ethernet@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) Documentation/devicetree/bindings/net/asix,ax88796c.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/net/asix,ax88796c.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/net/asix,ax88796c.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/net/asix,ax88796c.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/net/asix,ax88796c.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/asix,ax88796c.example.dt.yaml: example-0: ethernet@0:reg:0: [0] is too short From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/asix,ax88796c.example.dt.yaml: ethernet@0: 'interrupt-parrent' is a required property From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/asix,ax88796c.yaml See https://patchwork.ozlabs.org/patch/1389785 The base for the patch is generally the last rc1. Any dependencies should be noted. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On 10/28/20 10:40 PM, Łukasz Stelmach wrote: > Add bindings for AX88796C SPI Ethernet Adapter. > > Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> > --- > .../bindings/net/asix,ax88796c.yaml | 69 +++++++++++++++++++ > 1 file changed, 69 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/asix,ax88796c.yaml > > diff --git a/Documentation/devicetree/bindings/net/asix,ax88796c.yaml b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml > new file mode 100644 > index 000000000000..05093c1ec509 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml > @@ -0,0 +1,69 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/asix,ax88796c.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: ASIX AX88796C SPI Ethernet Adapter > + > +maintainers: > + - Łukasz Stelmach <l.stelmach@samsung.com> > + > +description: | > + ASIX AX88796C is an Ethernet controller with a built in PHY. This > + describes SPI mode of the chip. > + > + The node for this driver must be a child node of an SPI controller, > + hence all mandatory properties described in > + ../spi/spi-controller.yaml must be specified. > + > +allOf: > + - $ref: ethernet-controller.yaml# > + > +properties: > + compatible: > + const: asix,ax88796c > + > + reg: > + maxItems: 1 > + > + spi-max-frequency: > + maximum: 40000000 > + > + interrupts: > + maxItems: 1 > + > + reset-gpios: > + description: > + A GPIO line handling reset of the chip. As the line is active low, > + it should be marked GPIO_ACTIVE_LOW. > + maxItems: 1 > + > + local-mac-address: true > + > + mac-address: true > + > +required: > + - compatible > + - reg > + - spi-max-frequency > + - interrupts > + - interrupt-parrent ^^ typo? Marc
It was <2020-10-29 czw 18:06>, when Marc Kleine-Budde wrote: > On 10/28/20 10:40 PM, Łukasz Stelmach wrote: >> Add bindings for AX88796C SPI Ethernet Adapter. >> >> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> >> --- >> .../bindings/net/asix,ax88796c.yaml | 69 +++++++++++++++++++ >> 1 file changed, 69 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/net/asix,ax88796c.yaml >> >> diff --git >> a/Documentation/devicetree/bindings/net/asix,ax88796c.yaml >> b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml >> new file mode 100644 >> index 000000000000..05093c1ec509 [...] >> + - interrupts >> + - interrupt-parrent > ^^ > > typo? Indeed, removing this but thanks anyway.
diff --git a/Documentation/devicetree/bindings/net/asix,ax88796c.yaml b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml new file mode 100644 index 000000000000..05093c1ec509 --- /dev/null +++ b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/asix,ax88796c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASIX AX88796C SPI Ethernet Adapter + +maintainers: + - Łukasz Stelmach <l.stelmach@samsung.com> + +description: | + ASIX AX88796C is an Ethernet controller with a built in PHY. This + describes SPI mode of the chip. + + The node for this driver must be a child node of an SPI controller, + hence all mandatory properties described in + ../spi/spi-controller.yaml must be specified. + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + const: asix,ax88796c + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 40000000 + + interrupts: + maxItems: 1 + + reset-gpios: + description: + A GPIO line handling reset of the chip. As the line is active low, + it should be marked GPIO_ACTIVE_LOW. + maxItems: 1 + + local-mac-address: true + + mac-address: true + +required: + - compatible + - reg + - spi-max-frequency + - interrupts + - interrupt-parrent + - reset-gpios + +additionalProperties: false + +examples: + # Artik5 eval board + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + ethernet@0 { + compatible = "asix,ax88796c"; + reg = <0x0>; + local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ + interrupt-parent = <&gpx2>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <40000000>; + reset-gpios = <&gpe0 2 GPIO_ACTIVE_LOW>; + };
Add bindings for AX88796C SPI Ethernet Adapter. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> --- .../bindings/net/asix,ax88796c.yaml | 69 +++++++++++++++++++ 1 file changed, 69 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/asix,ax88796c.yaml