| Message ID | 20201029222509.27201-3-kabel@kernel.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | Support for RollBall 10G copper SFP modules | expand |
On Thu, Oct 29, 2020 at 11:25:06PM +0100, Marek Behún wrote: > Some SFPs may contain an internal PHY which may in some cases want to > connect with the host interface in 1000base-x/2500base-x mode. > Do not fail if such PHY is being attached in one of these PHY interface > modes. > > Signed-off-by: Marek Behún <kabel@kernel.org> > Cc: Andrew Lunn <andrew@lunn.ch> > Cc: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Thanks.
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 5d8c015bc9f2..705c49c37348 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -1018,7 +1018,7 @@ static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy, { if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED || (pl->cfg_link_an_mode == MLO_AN_INBAND && - phy_interface_mode_is_8023z(interface)))) + phy_interface_mode_is_8023z(interface) && !pl->sfp_bus))) return -EINVAL; if (pl->phydev) @@ -2069,9 +2069,6 @@ static int phylink_sfp_config(struct phylink *pl, u8 mode, phylink_an_mode_str(mode), phy_modes(config.interface), __ETHTOOL_LINK_MODE_MASK_NBITS, support); - if (phy_interface_mode_is_8023z(iface) && pl->phydev) - return -EINVAL; - changed = !linkmode_equal(pl->supported, support); if (changed) { linkmode_copy(pl->supported, support);
Some SFPs may contain an internal PHY which may in some cases want to connect with the host interface in 1000base-x/2500base-x mode. Do not fail if such PHY is being attached in one of these PHY interface modes. Signed-off-by: Marek Behún <kabel@kernel.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Russell King <rmk+kernel@armlinux.org.uk> --- drivers/net/phy/phylink.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)