| Message ID | 20201030172950.12767-2-dmurphy@ti.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | DP83TD510 Single Pair 10Mbps Ethernet PHY | expand |
On Fri, Oct 30, 2020 at 12:29:47PM -0500, Dan Murphy wrote: > Add entries for the 10base-T1L full and half duplex supported modes. > > $ ethtool eth0 > Supported ports: [ TP ] > Supported link modes: 10baseT1L/Half 10baseT1L/Full > Supported pause frame use: Symmetric Receive-only > Supports auto-negotiation: Yes > Supported FEC modes: Not reported > Advertised link modes: 10baseT1L/Half 10baseT1L/Full > Advertised pause frame use: No > Advertised auto-negotiation: No > Advertised FEC modes: Not reported > Speed: 10Mb/s > Duplex: Full > Auto-negotiation: on > Port: MII > PHYAD: 1 > Transceiver: external > Supports Wake-on: gs > Wake-on: d > SecureOn password: 00:00:00:00:00:00 > Current message level: 0x00000000 (0) > > Link detected: yes > > Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Andrew
On 10/30/2020 10:29 AM, Dan Murphy wrote: > Add entries for the 10base-T1L full and half duplex supported modes. > > $ ethtool eth0 > Supported ports: [ TP ] > Supported link modes: 10baseT1L/Half 10baseT1L/Full > Supported pause frame use: Symmetric Receive-only > Supports auto-negotiation: Yes > Supported FEC modes: Not reported > Advertised link modes: 10baseT1L/Half 10baseT1L/Full > Advertised pause frame use: No > Advertised auto-negotiation: No > Advertised FEC modes: Not reported > Speed: 10Mb/s > Duplex: Full > Auto-negotiation: on > Port: MII > PHYAD: 1 > Transceiver: external > Supports Wake-on: gs > Wake-on: d > SecureOn password: 00:00:00:00:00:00 > Current message level: 0x00000000 (0) > > Link detected: yes > > Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c index 8d333d3084ed..616fae7f0c86 100644 --- a/drivers/net/phy/phy-core.c +++ b/drivers/net/phy/phy-core.c @@ -13,7 +13,7 @@ */ const char *phy_speed_to_str(int speed) { - BUILD_BUG_ON_MSG(__ETHTOOL_LINK_MODE_MASK_NBITS != 92, + BUILD_BUG_ON_MSG(__ETHTOOL_LINK_MODE_MASK_NBITS != 94, "Enum ethtool_link_mode_bit_indices and phylib are out of sync. " "If a speed or mode has been added please update phy_speed_to_str " "and the PHY settings array.\n"); @@ -175,6 +175,8 @@ static const struct phy_setting settings[] = { /* 10M */ PHY_SETTING( 10, FULL, 10baseT_Full ), PHY_SETTING( 10, HALF, 10baseT_Half ), + PHY_SETTING( 10, FULL, 10baseT1L_Full ), + PHY_SETTING( 10, HALF, 10baseT1L_Half ), }; #undef PHY_SETTING diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 9ca87bc73c44..16b6ea7548d3 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -1619,6 +1619,8 @@ enum ethtool_link_mode_bit_indices { ETHTOOL_LINK_MODE_400000baseCR4_Full_BIT = 89, ETHTOOL_LINK_MODE_100baseFX_Half_BIT = 90, ETHTOOL_LINK_MODE_100baseFX_Full_BIT = 91, + ETHTOOL_LINK_MODE_10baseT1L_Half_BIT = 92, + ETHTOOL_LINK_MODE_10baseT1L_Full_BIT = 93, /* must be last entry */ __ETHTOOL_LINK_MODE_MASK_NBITS }; diff --git a/net/ethtool/common.c b/net/ethtool/common.c index 24036e3055a1..95f87febc742 100644 --- a/net/ethtool/common.c +++ b/net/ethtool/common.c @@ -194,6 +194,8 @@ const char link_mode_names[][ETH_GSTRING_LEN] = { __DEFINE_LINK_MODE_NAME(400000, CR4, Full), __DEFINE_LINK_MODE_NAME(100, FX, Half), __DEFINE_LINK_MODE_NAME(100, FX, Full), + __DEFINE_LINK_MODE_NAME(10, T1L, Half), + __DEFINE_LINK_MODE_NAME(10, T1L, Full), }; static_assert(ARRAY_SIZE(link_mode_names) == __ETHTOOL_LINK_MODE_MASK_NBITS); diff --git a/net/ethtool/linkmodes.c b/net/ethtool/linkmodes.c index c5bcb9abc8b9..a8fab6fb1b30 100644 --- a/net/ethtool/linkmodes.c +++ b/net/ethtool/linkmodes.c @@ -264,6 +264,8 @@ static const struct link_mode_info link_mode_params[] = { __DEFINE_LINK_MODE_PARAMS(400000, CR4, Full), __DEFINE_LINK_MODE_PARAMS(100, FX, Half), __DEFINE_LINK_MODE_PARAMS(100, FX, Full), + __DEFINE_LINK_MODE_PARAMS(10, T1L, Half), + __DEFINE_LINK_MODE_PARAMS(10, T1L, Full), }; const struct nla_policy ethnl_linkmodes_set_policy[] = {
Add entries for the 10base-T1L full and half duplex supported modes. $ ethtool eth0 Supported ports: [ TP ] Supported link modes: 10baseT1L/Half 10baseT1L/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT1L/Half 10baseT1L/Full Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 10Mb/s Duplex: Full Auto-negotiation: on Port: MII PHYAD: 1 Transceiver: external Supports Wake-on: gs Wake-on: d SecureOn password: 00:00:00:00:00:00 Current message level: 0x00000000 (0) Link detected: yes Signed-off-by: Dan Murphy <dmurphy@ti.com> --- drivers/net/phy/phy-core.c | 4 +++- include/uapi/linux/ethtool.h | 2 ++ net/ethtool/common.c | 2 ++ net/ethtool/linkmodes.c | 2 ++ 4 files changed, 9 insertions(+), 1 deletion(-)