@@ -236,7 +236,6 @@ static void rsi_rx_handler(struct rsi_hw *adapter)
struct rsi_91x_sdiodev *dev =
(struct rsi_91x_sdiodev *)adapter->rsi_dev;
int status;
- enum sdio_interrupt_type isr_type;
u8 isr_status = 0;
u8 fw_status = 0;
@@ -267,73 +266,69 @@ static void rsi_rx_handler(struct rsi_hw *adapter)
__func__, isr_status, (1 << MSDU_PKT_PENDING),
(1 << FW_ASSERT_IND));
- do {
- RSI_GET_SDIO_INTERRUPT_TYPE(isr_status, isr_type);
-
- switch (isr_type) {
- case BUFFER_AVAILABLE:
- status = rsi_sdio_check_buffer_status(adapter,
- 0);
- if (status < 0)
- rsi_dbg(ERR_ZONE,
- "%s: Failed to check buffer status\n",
- __func__);
- rsi_sdio_ack_intr(common->priv,
- (1 << PKT_BUFF_AVAILABLE));
- rsi_set_event(&common->tx_thread.event);
-
- rsi_dbg(ISR_ZONE,
- "%s: ==> BUFFER_AVAILABLE <==\n",
- __func__);
- dev->buff_status_updated = true;
- break;
-
- case FIRMWARE_ASSERT_IND:
+ if (isr_status & BIT(PKT_BUFF_AVAILABLE)) {
+ status = rsi_sdio_check_buffer_status(adapter, 0);
+ if (status < 0)
rsi_dbg(ERR_ZONE,
- "%s: ==> FIRMWARE Assert <==\n",
+ "%s: Failed to check buffer status\n",
__func__);
- status = rsi_sdio_read_register(common->priv,
+ rsi_sdio_ack_intr(common->priv,
+ BIT(PKT_BUFF_AVAILABLE));
+ rsi_set_event(&common->tx_thread.event);
+
+ rsi_dbg(ISR_ZONE, "%s: ==> BUFFER_AVAILABLE <==\n",
+ __func__);
+ dev->buff_status_updated = true;
+
+ isr_status &= ~BIT(PKT_BUFF_AVAILABLE);
+ }
+
+ if (isr_status & BIT(FW_ASSERT_IND)) {
+ rsi_dbg(ERR_ZONE, "%s: ==> FIRMWARE Assert <==\n",
+ __func__);
+ status = rsi_sdio_read_register(common->priv,
SDIO_FW_STATUS_REG,
&fw_status);
- if (status) {
- rsi_dbg(ERR_ZONE,
- "%s: Failed to read f/w reg\n",
- __func__);
- } else {
- rsi_dbg(ERR_ZONE,
- "%s: Firmware Status is 0x%x\n",
- __func__ , fw_status);
- rsi_sdio_ack_intr(common->priv,
- (1 << FW_ASSERT_IND));
- }
-
- common->fsm_state = FSM_CARD_NOT_READY;
- break;
-
- case MSDU_PACKET_PENDING:
- rsi_dbg(ISR_ZONE, "Pkt pending interrupt\n");
- dev->rx_info.total_sdio_msdu_pending_intr++;
-
- status = rsi_process_pkt(common);
- if (status) {
- rsi_dbg(ERR_ZONE,
- "%s: Failed to read pkt\n",
- __func__);
- mutex_unlock(&common->rx_lock);
- return;
- }
- break;
- default:
- rsi_sdio_ack_intr(common->priv, isr_status);
- dev->rx_info.total_sdio_unknown_intr++;
- isr_status = 0;
- rsi_dbg(ISR_ZONE,
- "Unknown Interrupt %x\n",
- isr_status);
- break;
+ if (status) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed to read f/w reg\n",
+ __func__);
+ } else {
+ rsi_dbg(ERR_ZONE,
+ "%s: Firmware Status is 0x%x\n",
+ __func__, fw_status);
+ rsi_sdio_ack_intr(common->priv,
+ BIT(FW_ASSERT_IND));
}
- isr_status ^= BIT(isr_type - 1);
- } while (isr_status);
+
+ common->fsm_state = FSM_CARD_NOT_READY;
+
+ isr_status &= ~BIT(FW_ASSERT_IND);
+ }
+
+ if (isr_status & BIT(MSDU_PKT_PENDING)) {
+ rsi_dbg(ISR_ZONE, "Pkt pending interrupt\n");
+ dev->rx_info.total_sdio_msdu_pending_intr++;
+
+ status = rsi_process_pkt(common);
+ if (status) {
+ rsi_dbg(ERR_ZONE, "%s: Failed to read pkt\n",
+ __func__);
+ mutex_unlock(&common->rx_lock);
+ return;
+ }
+
+ isr_status &= ~BIT(MSDU_PKT_PENDING);
+ }
+
+ if (isr_status) {
+ rsi_sdio_ack_intr(common->priv, isr_status);
+ dev->rx_info.total_sdio_unknown_intr++;
+ isr_status = 0;
+ rsi_dbg(ISR_ZONE, "Unknown Interrupt %x\n",
+ isr_status);
+ }
+
mutex_unlock(&common->rx_lock);
} while (1);
}
The inner do { ... } while loop is completely useless, all it does is iterate over a switch-case statement, one bit at a time. This can easily be replaced by simple if (status & bit) { ... } tests for each bit. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Angus Ainslie <angus@akkea.ca> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Martin Kepplinger <martink@posteo.de> Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org --- drivers/net/wireless/rsi/rsi_91x_sdio_ops.c | 121 ++++++++++---------- 1 file changed, 58 insertions(+), 63 deletions(-)