diff mbox series

[01/10] thunderbolt: Do not clear USB4 router protocol adapter IFC and ISE bits

Message ID 20201104140030.6853-2-mika.westerberg@linux.intel.com (mailing list archive)
State Not Applicable
Delegated to: Netdev Maintainers
Headers show
Series thunderbolt: Add DMA traffic test driver | expand

Commit Message

Mika Westerberg Nov. 4, 2020, 2 p.m. UTC 
These fields are marked as vendor defined in the USB4 spec and should
not be modified by the software, so only clear them when we are dealing
with pre-USB4 hardware.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/thunderbolt/path.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/thunderbolt/path.c b/drivers/thunderbolt/path.c
index 03e7b714deab..7c2c45d9ba4a 100644
--- a/drivers/thunderbolt/path.c
+++ b/drivers/thunderbolt/path.c
@@ -406,10 +406,17 @@  static int __tb_path_deactivate_hop(struct tb_port *port, int hop_index,
 
 		if (!hop.pending) {
 			if (clear_fc) {
-				/* Clear flow control */
-				hop.ingress_fc = 0;
+				/*
+				 * Clear flow control. Protocol adapters
+				 * IFC and ISE bits are vendor defined
+				 * in the USB4 spec so we clear them
+				 * only for pre-USB4 adapters.
+				 */
+				if (!tb_switch_is_usb4(port->sw)) {
+					hop.ingress_fc = 0;
+					hop.ingress_shared_buffer = 0;
+				}
 				hop.egress_fc = 0;
-				hop.ingress_shared_buffer = 0;
 				hop.egress_shared_buffer = 0;
 
 				return tb_port_write(port, &hop, TB_CFG_HOPS,