diff mbox series

[net-next,04/15] net: phy: icplus: remove the use .ack_interrupt()

Message ID 20201123153817.1616814-5-ciorneiioana@gmail.com (mailing list archive)
State Accepted
Commit 12ae7ba3c15aa6aa1eef6deb275bbd9a812a575d
Delegated to: Netdev Maintainers
Headers show
Series net: phy: add support for shared interrupts (part 3) | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 64 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Ioana Ciornei Nov. 23, 2020, 3:38 p.m. UTC 
From: Ioana Ciornei <ioana.ciornei@nxp.com>

In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.

This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
 drivers/net/phy/icplus.c | 38 +++++++++++++++++++++++++-------------
 1 file changed, 25 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index a74ff45fa99c..b632947cbcdf 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -272,17 +272,39 @@  static int ip101a_g_config_init(struct phy_device *phydev)
 	return phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c);
 }
 
+static int ip101a_g_ack_interrupt(struct phy_device *phydev)
+{
+	int err = phy_read(phydev, IP101A_G_IRQ_CONF_STATUS);
+
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
 static int ip101a_g_config_intr(struct phy_device *phydev)
 {
 	u16 val;
+	int err;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		err = ip101a_g_ack_interrupt(phydev);
+		if (err)
+			return err;
 
-	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
 		/* INTR pin used: Speed/link/duplex will cause an interrupt */
 		val = IP101A_G_IRQ_PIN_USED;
-	else
+		err = phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, val);
+	} else {
 		val = IP101A_G_IRQ_ALL_MASK;
+		err = phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, val);
+		if (err)
+			return err;
+
+		err = ip101a_g_ack_interrupt(phydev);
+	}
 
-	return phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, val);
+	return err;
 }
 
 static irqreturn_t ip101a_g_handle_interrupt(struct phy_device *phydev)
@@ -305,15 +327,6 @@  static irqreturn_t ip101a_g_handle_interrupt(struct phy_device *phydev)
 	return IRQ_HANDLED;
 }
 
-static int ip101a_g_ack_interrupt(struct phy_device *phydev)
-{
-	int err = phy_read(phydev, IP101A_G_IRQ_CONF_STATUS);
-	if (err < 0)
-		return err;
-
-	return 0;
-}
-
 static struct phy_driver icplus_driver[] = {
 {
 	.phy_id		= 0x02430d80,
@@ -340,7 +353,6 @@  static struct phy_driver icplus_driver[] = {
 	/* PHY_BASIC_FEATURES */
 	.probe		= ip101a_g_probe,
 	.config_intr	= ip101a_g_config_intr,
-	.ack_interrupt	= ip101a_g_ack_interrupt,
 	.handle_interrupt = ip101a_g_handle_interrupt,
 	.config_init	= &ip101a_g_config_init,
 	.suspend	= genphy_suspend,