| Message ID | 20210106153749.6748-4-pali@kernel.org (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber | expand |
| Context | Check | Description |
|---|---|---|
| netdev/cover_letter | success | Link |
| netdev/fixes_present | success | Link |
| netdev/patch_count | success | Link |
| netdev/tree_selection | success | Guessed tree name to be net-next |
| netdev/subject_prefix | warning | Target tree name not specified in the subject |
| netdev/cc_maintainers | success | CCed 6 of 6 maintainers |
| netdev/source_inline | success | Was 0 now: 0 |
| netdev/verify_signedoff | success | Link |
| netdev/module_param | success | Was 0 now: 0 |
| netdev/build_32bit | success | Errors and warnings before: 1 this patch: 1 |
| netdev/kdoc | success | Errors and warnings before: 0 this patch: 0 |
| netdev/verify_fixes | success | Link |
| netdev/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 50 lines checked |
| netdev/build_allmodconfig_warn | success | Errors and warnings before: 1 this patch: 1 |
| netdev/header_inline | success | Link |
| netdev/stable | success | Stable not CCed |
On Wed, Jan 06, 2021 at 04:37:49PM +0100, Pali Rohár wrote: > SFP GPON module Ubiquiti U-Fiber Instant has in its EEPROM stored nonsense > information. It claims that support all transceiver types including 10G > Ethernet which is not truth. So clear all claimed modes and set only one > mode which module supports: 1000baseX_Full. > > Also this module have set SFF phys_id in its EEPROM. Kernel SFP subsustem > currently does not allow to use SFP modules detected as SFF. Therefore add > and exception for this module so it can be detected as supported. > > This change finally allows to detect and use SFP GPON module Ubiquiti > U-Fiber Instant on Linux system. > > EEPROM content of this SFP module is (where XX is serial number): > > 00: 02 04 0b ff ff ff ff ff ff ff ff 03 0c 00 14 c8 ???........??.?? > 10: 00 00 00 00 55 42 4e 54 20 20 20 20 20 20 20 20 ....UBNT > 20: 20 20 20 20 00 18 e8 29 55 46 2d 49 4e 53 54 41 .??)UF-INSTA > 30: 4e 54 20 20 20 20 20 20 34 20 20 20 05 1e 00 36 NT 4 ??.6 > 40: 00 06 00 00 55 42 4e 54 XX XX XX XX XX XX XX XX .?..UBNTXXXXXXXX > 50: 20 20 20 20 31 34 30 31 32 33 20 20 60 80 02 41 140123 `??A > > Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Andrew
diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c index 20b91f5dfc6e..4cf874fb5c5b 100644 --- a/drivers/net/phy/sfp-bus.c +++ b/drivers/net/phy/sfp-bus.c @@ -44,6 +44,17 @@ static void sfp_quirk_2500basex(const struct sfp_eeprom_id *id, phylink_set(modes, 2500baseX_Full); } +static void sfp_quirk_ubnt_uf_instant(const struct sfp_eeprom_id *id, + unsigned long *modes) +{ + /* Ubiquiti U-Fiber Instant module claims that support all transceiver + * types including 10G Ethernet which is not truth. So clear all claimed + * modes and set only one mode which module supports: 1000baseX_Full. + */ + phylink_zero(modes); + phylink_set(modes, 1000baseX_Full); +} + static const struct sfp_quirk sfp_quirks[] = { { // Alcatel Lucent G-010S-P can operate at 2500base-X, but @@ -63,6 +74,10 @@ static const struct sfp_quirk sfp_quirks[] = { .vendor = "HUAWEI", .part = "MA5671A", .modes = sfp_quirk_2500basex, + }, { + .vendor = "UBNT", + .part = "UF-INSTANT", + .modes = sfp_quirk_ubnt_uf_instant, }, }; diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index 15fb8f7dfe5b..c3a0dcc737fd 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -273,8 +273,21 @@ static const struct sff_data sff_data = { static bool sfp_module_supported(const struct sfp_eeprom_id *id) { - return id->base.phys_id == SFF8024_ID_SFP && - id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP; + if (id->base.phys_id == SFF8024_ID_SFP && + id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP) + return true; + + /* SFP GPON module Ubiquiti U-Fiber Instant has in its EEPROM stored + * phys id SFF instead of SFP. Therefore mark this module explicitly + * as supported based on vendor name and pn match. + */ + if (id->base.phys_id == SFF8024_ID_SFF_8472 && + id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP && + !memcmp(id->base.vendor_name, "UBNT ", 16) && + !memcmp(id->base.vendor_pn, "UF-INSTANT ", 16)) + return true; + + return false; } static const struct sff_data sfp_data = {
SFP GPON module Ubiquiti U-Fiber Instant has in its EEPROM stored nonsense information. It claims that support all transceiver types including 10G Ethernet which is not truth. So clear all claimed modes and set only one mode which module supports: 1000baseX_Full. Also this module have set SFF phys_id in its EEPROM. Kernel SFP subsustem currently does not allow to use SFP modules detected as SFF. Therefore add and exception for this module so it can be detected as supported. This change finally allows to detect and use SFP GPON module Ubiquiti U-Fiber Instant on Linux system. EEPROM content of this SFP module is (where XX is serial number): 00: 02 04 0b ff ff ff ff ff ff ff ff 03 0c 00 14 c8 ???........??.?? 10: 00 00 00 00 55 42 4e 54 20 20 20 20 20 20 20 20 ....UBNT 20: 20 20 20 20 00 18 e8 29 55 46 2d 49 4e 53 54 41 .??)UF-INSTA 30: 4e 54 20 20 20 20 20 20 34 20 20 20 05 1e 00 36 NT 4 ??.6 40: 00 06 00 00 55 42 4e 54 XX XX XX XX XX XX XX XX .?..UBNTXXXXXXXX 50: 20 20 20 20 31 34 30 31 32 33 20 20 60 80 02 41 140123 `??A Signed-off-by: Pali Rohár <pali@kernel.org> --- Changes in v2: * add this module also into sfp_module_supported() function --- drivers/net/phy/sfp-bus.c | 15 +++++++++++++++ drivers/net/phy/sfp.c | 17 +++++++++++++++-- 2 files changed, 30 insertions(+), 2 deletions(-)