@@ -6666,6 +6666,7 @@ F: Documentation/devicetree/bindings/net/mdio*
F: Documentation/devicetree/bindings/net/qca,ar803x.yaml
F: Documentation/networking/phy.rst
F: drivers/net/mdio/
+F: drivers/net/mdio/acpi_mdio.c
F: drivers/net/mdio/of_mdio.c
F: drivers/net/pcs/
F: drivers/net/phy/
@@ -27,6 +27,13 @@ config OF_MDIO
help
OpenFirmware MDIO bus (Ethernet PHY) accessors
+config ACPI_MDIO
+ def_tristate PHYLIB
+ depends on ACPI
+ depends on PHYLIB
+ help
+ ACPI MDIO bus (Ethernet PHY) accessors
+
if MDIO_BUS
config MDIO_DEVRES
@@ -2,6 +2,7 @@
# Makefile for Linux MDIO bus drivers
obj-$(CONFIG_OF_MDIO) += of_mdio.o
+obj-$(CONFIG_ACPI_MDIO) += acpi_mdio.o
obj-$(CONFIG_MDIO_ASPEED) += mdio-aspeed.o
obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o
new file mode 100644
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ACPI helpers for the MDIO (Ethernet PHY) API
+ *
+ * This file provides helper functions for extracting PHY device information
+ * out of the ACPI ASL and using it to populate an mii_bus.
+ */
+
+#include <linux/acpi.h>
+#include <linux/acpi_mdio.h>
+
+/**
+ * acpi_mdiobus_register - Register mii_bus and create PHYs from the ACPI ASL.
+ *
+ * @mdio: pointer to mii_bus structure
+ * @fwnode: pointer to fwnode of MDIO bus.
+ *
+ * This function registers the mii_bus structure and registers a phy_device
+ * for each child node of @fwnode.
+ */
+int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
+{
+ struct fwnode_handle *child;
+ u32 addr;
+ int ret;
+
+ /* Mask out all PHYs from auto probing. */
+ mdio->phy_mask = ~0;
+ ret = mdiobus_register(mdio);
+ if (ret)
+ return ret;
+
+ mdio->dev.fwnode = fwnode;
+/* Loop over the child nodes and register a phy_device for each PHY */
+ fwnode_for_each_child_node(fwnode, child) {
+ ret = fwnode_get_id(child, &addr);
+
+ if (addr >= PHY_MAX_ADDR)
+ continue;
+
+ ret = fwnode_mdiobus_register_phy(mdio, child, addr);
+ if (ret == -ENODEV)
+ dev_err(&mdio->dev,
+ "MDIO device at address %d is missing.\n",
+ addr);
+ }
+ return 0;
+}
+EXPORT_SYMBOL(acpi_mdiobus_register);
new file mode 100644
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * ACPI helpers for the MDIO (Ethernet PHY) API
+ *
+ */
+
+#ifndef __LINUX_ACPI_MDIO_H
+#define __LINUX_ACPI_MDIO_H
+
+#include <linux/device.h>
+#include <linux/phy.h>
+
+#if IS_ENABLED(CONFIG_ACPI_MDIO)
+int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode);
+#else /* CONFIG_ACPI_MDIO */
+static inline int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
+{
+ /*
+ * Fall back to mdiobus_register() function to register a bus.
+ * This way, we don't have to keep compat bits around in drivers.
+ */
+
+ return mdiobus_register(mdio);
+}
+#endif
+
+#endif /* __LINUX_ACPI_MDIO_H */
Define acpi_mdiobus_register() to Register mii_bus and create PHYs for each ACPI child node. Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> --- Changes in v4: None Changes in v3: None Changes in v2: None MAINTAINERS | 1 + drivers/net/mdio/Kconfig | 7 ++++++ drivers/net/mdio/Makefile | 1 + drivers/net/mdio/acpi_mdio.c | 49 ++++++++++++++++++++++++++++++++++++ include/linux/acpi_mdio.h | 27 ++++++++++++++++++++ 5 files changed, 85 insertions(+) create mode 100644 drivers/net/mdio/acpi_mdio.c create mode 100644 include/linux/acpi_mdio.h