@@ -680,6 +680,551 @@ chk_prio_nr()
fi
}
+subflows_tests()
+{
+ reset
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "no JOIN" "0" "0" "0"
+
+ # subflow limited by client
+ reset
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "single subflow, limited by client" 0 0 0
+
+ # subflow limited by server
+ reset
+ ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "single subflow, limited by server" 1 1 0
+
+ # subflow
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "single subflow" 1 1 1
+
+ # multiple subflows
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 2
+ ip netns exec $ns2 ./pm_nl_ctl limits 0 2
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "multiple subflows" 2 2 2
+
+ # multiple subflows limited by serverf
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl limits 0 2
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "multiple subflows, limited by server" 2 2 1
+}
+
+signal_address_tests()
+{
+ # add_address, unused
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "unused signal address" 0 0 0
+ chk_add_nr 1 1
+
+ # accept and use add_addr
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "signal address" 1 1 1
+ chk_add_nr 1 1
+
+ # accept and use add_addr with an additional subflow
+ # note: signal address in server ns and local addresses in client ns must
+ # belong to different subnets or one of the listed local address could be
+ # used for 'add_addr' subflow
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 2
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 2
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "subflow and signal" 2 2 2
+ chk_add_nr 1 1
+
+ # accept and use add_addr with additional subflows
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 3
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 3
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "multiple subflows and signal" 3 3 3
+ chk_add_nr 1 1
+}
+
+link_failure_tests()
+{
+ # accept and use add_addr with additional subflows and link loss
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 3
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 3
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
+ run_tests $ns1 $ns2 10.0.1.1 1
+ chk_join_nr "multiple flows, signal, link failure" 3 3 3
+ chk_add_nr 1 1
+}
+
+add_addr_timeout_tests()
+{
+ # add_addr timeout
+ reset_with_add_addr_timeout
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
+ chk_join_nr "signal address, ADD_ADDR timeout" 1 1 1
+ chk_add_nr 4 0
+
+ # add_addr timeout IPv6
+ reset_with_add_addr_timeout 6
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal
+ run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
+ chk_join_nr "signal address, ADD_ADDR6 timeout" 1 1 1
+ chk_add_nr 4 0
+}
+
+remove_tests()
+{
+ # single subflow, remove
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ run_tests $ns1 $ns2 10.0.1.1 0 0 -1 slow
+ chk_join_nr "remove single subflow" 1 1 1
+ chk_rm_nr 1 1
+
+ # multiple subflows, remove
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 2
+ ip netns exec $ns2 ./pm_nl_ctl limits 0 2
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ run_tests $ns1 $ns2 10.0.1.1 0 0 -2 slow
+ chk_join_nr "remove multiple subflows" 2 2 2
+ chk_rm_nr 2 2
+
+ # single address, remove
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow
+ chk_join_nr "remove single address" 1 1 1
+ chk_add_nr 1 1
+ chk_rm_nr 0 0
+
+ # subflow and signal, remove
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 2
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 2
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow
+ chk_join_nr "remove subflow and signal" 2 2 2
+ chk_add_nr 1 1
+ chk_rm_nr 1 1
+
+ # subflows and signal, remove
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 3
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 3
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
+ run_tests $ns1 $ns2 10.0.1.1 0 -1 -2 slow
+ chk_join_nr "remove subflows and signal" 3 3 3
+ chk_add_nr 1 1
+ chk_rm_nr 2 2
+
+ # subflows and signal, flush
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 3
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 3
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
+ run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
+ chk_join_nr "flush subflows and signal" 3 3 3
+ chk_add_nr 1 1
+ chk_rm_nr 2 2
+}
+
+add_tests()
+{
+ # add single subflow
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow
+ chk_join_nr "add single subflow" 1 1 1
+
+ # add signal address
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ run_tests $ns1 $ns2 10.0.1.1 0 1 0 slow
+ chk_join_nr "add signal address" 1 1 1
+ chk_add_nr 1 1
+
+ # add multiple subflows
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 2
+ ip netns exec $ns2 ./pm_nl_ctl limits 0 2
+ run_tests $ns1 $ns2 10.0.1.1 0 0 2 slow
+ chk_join_nr "add multiple subflows" 2 2 2
+
+ # add multiple subflows IPv6
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 2
+ ip netns exec $ns2 ./pm_nl_ctl limits 0 2
+ run_tests $ns1 $ns2 dead:beef:1::1 0 0 2 slow
+ chk_join_nr "add multiple subflows IPv6" 2 2 2
+
+ # add multiple addresses IPv6
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 2
+ ip netns exec $ns2 ./pm_nl_ctl limits 2 2
+ run_tests $ns1 $ns2 dead:beef:1::1 0 2 0 slow
+ chk_join_nr "add multiple addresses IPv6" 2 2 2
+ chk_add_nr 2 2
+}
+
+ipv6_tests()
+{
+ # subflow IPv6
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl add dead:beef:3::2 flags subflow
+ run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
+ chk_join_nr "single subflow IPv6" 1 1 1
+
+ # add_address, unused IPv6
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal
+ run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
+ chk_join_nr "unused signal address IPv6" 0 0 0
+ chk_add_nr 1 1
+
+ # signal address IPv6
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
+ chk_join_nr "single address IPv6" 1 1 1
+ chk_add_nr 1 1
+
+ # single address IPv6, remove
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ run_tests $ns1 $ns2 dead:beef:1::1 0 -1 0 slow
+ chk_join_nr "remove single address IPv6" 1 1 1
+ chk_add_nr 1 1
+ chk_rm_nr 0 0
+
+ # subflow and signal IPv6, remove
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 2
+ ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 2
+ ip netns exec $ns2 ./pm_nl_ctl add dead:beef:3::2 flags subflow
+ run_tests $ns1 $ns2 dead:beef:1::1 0 -1 -1 slow
+ chk_join_nr "remove subflow and signal IPv6" 2 2 2
+ chk_add_nr 1 1
+ chk_rm_nr 1 1
+}
+
+v4mapped_tests()
+{
+ # subflow IPv4-mapped to IPv4-mapped
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl add "::ffff:10.0.3.2" flags subflow
+ run_tests $ns1 $ns2 "::ffff:10.0.1.1"
+ chk_join_nr "single subflow IPv4-mapped" 1 1 1
+
+ # signal address IPv4-mapped with IPv4-mapped sk
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ ip netns exec $ns1 ./pm_nl_ctl add "::ffff:10.0.2.1" flags signal
+ run_tests $ns1 $ns2 "::ffff:10.0.1.1"
+ chk_join_nr "signal address IPv4-mapped" 1 1 1
+ chk_add_nr 1 1
+
+ # subflow v4-map-v6
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ run_tests $ns1 $ns2 "::ffff:10.0.1.1"
+ chk_join_nr "single subflow v4-map-v6" 1 1 1
+
+ # signal address v4-map-v6
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ run_tests $ns1 $ns2 "::ffff:10.0.1.1"
+ chk_join_nr "signal address v4-map-v6" 1 1 1
+ chk_add_nr 1 1
+
+ # subflow v6-map-v4
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl add "::ffff:10.0.3.2" flags subflow
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "single subflow v6-map-v4" 1 1 1
+
+ # signal address v6-map-v4
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ ip netns exec $ns1 ./pm_nl_ctl add "::ffff:10.0.2.1" flags signal
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "signal address v6-map-v4" 1 1 1
+ chk_add_nr 1 1
+
+ # no subflow IPv6 to v4 address
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl add dead:beef:2::2 flags subflow
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "no JOIN with diff families v4-v6" 0 0 0
+
+ # no subflow IPv6 to v4 address even if v6 has a valid v4 at the end
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl add dead:beef:2::10.0.3.2 flags subflow
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "no JOIN with diff families v4-v6-2" 0 0 0
+
+ # no subflow IPv4 to v6 address, no need to slow down too then
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ run_tests $ns1 $ns2 dead:beef:1::1
+ chk_join_nr "no JOIN with diff families v6-v4" 0 0 0
+}
+
+backup_tests()
+{
+ # single subflow, backup
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow,backup
+ run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow nobackup
+ chk_join_nr "single subflow, backup" 1 1 1
+ chk_prio_nr 0 1
+
+ # single address, backup
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup
+ chk_join_nr "single address, backup" 1 1 1
+ chk_add_nr 1 1
+ chk_prio_nr 1 0
+}
+
+add_addr_ports_tests()
+{
+ # signal address with port
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "signal address with port" 1 1 1
+ chk_add_nr 1 1 1
+
+ # subflow and signal with port
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 2
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 2
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "subflow and signal with port" 2 2 2
+ chk_add_nr 1 1 1
+
+ # single address with port, remove
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow
+ chk_join_nr "remove single address with port" 1 1 1
+ chk_add_nr 1 1 1
+ chk_rm_nr 0 0
+
+ # subflow and signal with port, remove
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 2
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 2
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow
+ chk_join_nr "remove subflow and signal with port" 2 2 2
+ chk_add_nr 1 1 1
+ chk_rm_nr 1 1
+
+ # subflows and signal with port, flush
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 3
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 3
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
+ run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
+ chk_join_nr "flush subflows and signal with port" 3 3 3
+ chk_add_nr 1 1
+ chk_rm_nr 2 2
+
+ # multiple addresses with port
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 2 2
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal port 10100
+ ip netns exec $ns2 ./pm_nl_ctl limits 2 2
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "multiple addresses with port" 2 2 2
+ chk_add_nr 2 2 2
+
+ # multiple addresses with ports
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 2 2
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal port 10101
+ ip netns exec $ns2 ./pm_nl_ctl limits 2 2
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "multiple addresses with ports" 2 2 2
+ chk_add_nr 2 2 2
+}
+
+syncookies_tests()
+{
+ # single subflow, syncookies
+ reset_with_cookies
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "single subflow with syn cookies" 1 1 1
+
+ # multiple subflows with syn cookies
+ reset_with_cookies
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 2
+ ip netns exec $ns2 ./pm_nl_ctl limits 0 2
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "multiple subflows with syn cookies" 2 2 2
+
+ # multiple subflows limited by server
+ reset_with_cookies
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl limits 0 2
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "subflows limited by server w cookies" 2 2 1
+
+ # test signal address with cookies
+ reset_with_cookies
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "signal address with syn cookies" 1 1 1
+ chk_add_nr 1 1
+
+ # test cookie with subflow and signal
+ reset_with_cookies
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 2
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 2
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "subflow and signal w cookies" 2 2 2
+ chk_add_nr 1 1
+
+ # accept and use add_addr with additional subflows
+ reset_with_cookies
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 3
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 3
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
+ run_tests $ns1 $ns2 10.0.1.1
+ chk_join_nr "subflows and signal w. cookies" 3 3 3
+ chk_add_nr 1 1
+}
+
+all_tests()
+{
+ subflows_tests
+ signal_address_tests
+ link_failure_tests
+ add_addr_timeout_tests
+ remove_tests
+ add_tests
+ ipv6_tests
+ v4mapped_tests
+ backup_tests
+ add_addr_ports_tests
+ syncookies_tests
+}
+
+usage()
+{
+ echo "mptcp_join usage:"
+ echo " -f subflows_tests"
+ echo " -s signal_address_tests"
+ echo " -l link_failure_tests"
+ echo " -t add_addr_timeout_tests"
+ echo " -r remove_tests"
+ echo " -a add_tests"
+ echo " -6 ipv6_tests"
+ echo " -4 v4mapped_tests"
+ echo " -b backup_tests"
+ echo " -p add_addr_ports_tests"
+ echo " -c syncookies_tests"
+ echo " -h help"
+}
+
sin=$(mktemp)
sout=$(mktemp)
cin=$(mktemp)
@@ -690,483 +1235,50 @@ make_file "$cin" "client" 1
make_file "$sin" "server" 1
trap cleanup EXIT
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "no JOIN" "0" "0" "0"
-
-# subflow limted by client
-reset
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "single subflow, limited by client" 0 0 0
-
-# subflow limted by server
-reset
-ip netns exec $ns2 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "single subflow, limited by server" 1 1 0
-
-# subflow
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "single subflow" 1 1 1
-
-# multiple subflows
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 2
-ip netns exec $ns2 ./pm_nl_ctl limits 0 2
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "multiple subflows" 2 2 2
-
-# multiple subflows limited by serverf
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl limits 0 2
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "multiple subflows, limited by server" 2 2 1
-
-# add_address, unused
-reset
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "unused signal address" 0 0 0
-chk_add_nr 1 1
-
-# accept and use add_addr
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl limits 1 1
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "signal address" 1 1 1
-chk_add_nr 1 1
-
-# accept and use add_addr with an additional subflow
-# note: signal address in server ns and local addresses in client ns must
-# belong to different subnets or one of the listed local address could be
-# used for 'add_addr' subflow
-reset
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
-ip netns exec $ns1 ./pm_nl_ctl limits 0 2
-ip netns exec $ns2 ./pm_nl_ctl limits 1 2
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "subflow and signal" 2 2 2
-chk_add_nr 1 1
-
-# accept and use add_addr with additional subflows
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 3
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
-ip netns exec $ns2 ./pm_nl_ctl limits 1 3
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "multiple subflows and signal" 3 3 3
-chk_add_nr 1 1
-
-# accept and use add_addr with additional subflows and link loss
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 3
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
-ip netns exec $ns2 ./pm_nl_ctl limits 1 3
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1 1
-chk_join_nr "multiple flows, signal, link failure" 3 3 3
-chk_add_nr 1 1
-
-# add_addr timeout
-reset_with_add_addr_timeout
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl limits 1 1
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
-run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
-chk_join_nr "signal address, ADD_ADDR timeout" 1 1 1
-chk_add_nr 4 0
-
-# single subflow, remove
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1 0 0 -1 slow
-chk_join_nr "remove single subflow" 1 1 1
-chk_rm_nr 1 1
-
-# multiple subflows, remove
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 2
-ip netns exec $ns2 ./pm_nl_ctl limits 0 2
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1 0 0 -2 slow
-chk_join_nr "remove multiple subflows" 2 2 2
-chk_rm_nr 2 2
-
-# single address, remove
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
-ip netns exec $ns2 ./pm_nl_ctl limits 1 1
-run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow
-chk_join_nr "remove single address" 1 1 1
-chk_add_nr 1 1
-chk_rm_nr 0 0
-
-# subflow and signal, remove
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 2
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
-ip netns exec $ns2 ./pm_nl_ctl limits 1 2
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow
-chk_join_nr "remove subflow and signal" 2 2 2
-chk_add_nr 1 1
-chk_rm_nr 1 1
-
-# subflows and signal, remove
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 3
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
-ip netns exec $ns2 ./pm_nl_ctl limits 1 3
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1 0 -1 -2 slow
-chk_join_nr "remove subflows and signal" 3 3 3
-chk_add_nr 1 1
-chk_rm_nr 2 2
-
-# subflows and signal, flush
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 3
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
-ip netns exec $ns2 ./pm_nl_ctl limits 1 3
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
-chk_join_nr "flush subflows and signal" 3 3 3
-chk_add_nr 1 1
-chk_rm_nr 2 2
-
-# add single subflow
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl limits 0 1
-run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow
-chk_join_nr "add single subflow" 1 1 1
-
-# add signal address
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl limits 1 1
-run_tests $ns1 $ns2 10.0.1.1 0 1 0 slow
-chk_join_nr "add signal address" 1 1 1
-chk_add_nr 1 1
-
-# add multiple subflows
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 2
-ip netns exec $ns2 ./pm_nl_ctl limits 0 2
-run_tests $ns1 $ns2 10.0.1.1 0 0 2 slow
-chk_join_nr "add multiple subflows" 2 2 2
-
-# add multiple subflows IPv6
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 2
-ip netns exec $ns2 ./pm_nl_ctl limits 0 2
-run_tests $ns1 $ns2 dead:beef:1::1 0 0 2 slow
-chk_join_nr "add multiple subflows IPv6" 2 2 2
-
-# add multiple addresses IPv6
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 2
-ip netns exec $ns2 ./pm_nl_ctl limits 2 2
-run_tests $ns1 $ns2 dead:beef:1::1 0 2 0 slow
-chk_join_nr "add multiple addresses IPv6" 2 2 2
-chk_add_nr 2 2
-
-# subflow IPv6
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl add dead:beef:3::2 flags subflow
-run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
-chk_join_nr "single subflow IPv6" 1 1 1
-
-# add_address, unused IPv6
-reset
-ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal
-run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
-chk_join_nr "unused signal address IPv6" 0 0 0
-chk_add_nr 1 1
-
-# signal address IPv6
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal
-ip netns exec $ns2 ./pm_nl_ctl limits 1 1
-run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
-chk_join_nr "single address IPv6" 1 1 1
-chk_add_nr 1 1
-
-# add_addr timeout IPv6
-reset_with_add_addr_timeout 6
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl limits 1 1
-ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal
-run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
-chk_join_nr "signal address, ADD_ADDR6 timeout" 1 1 1
-chk_add_nr 4 0
-
-# single address IPv6, remove
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal
-ip netns exec $ns2 ./pm_nl_ctl limits 1 1
-run_tests $ns1 $ns2 dead:beef:1::1 0 -1 0 slow
-chk_join_nr "remove single address IPv6" 1 1 1
-chk_add_nr 1 1
-chk_rm_nr 0 0
-
-# subflow and signal IPv6, remove
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 2
-ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal
-ip netns exec $ns2 ./pm_nl_ctl limits 1 2
-ip netns exec $ns2 ./pm_nl_ctl add dead:beef:3::2 flags subflow
-run_tests $ns1 $ns2 dead:beef:1::1 0 -1 -1 slow
-chk_join_nr "remove subflow and signal IPv6" 2 2 2
-chk_add_nr 1 1
-chk_rm_nr 1 1
-
-# subflow IPv4-mapped to IPv4-mapped
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl add "::ffff:10.0.3.2" flags subflow
-run_tests $ns1 $ns2 "::ffff:10.0.1.1"
-chk_join_nr "single subflow IPv4-mapped" 1 1 1
-
-# signal address IPv4-mapped with IPv4-mapped sk
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl limits 1 1
-ip netns exec $ns1 ./pm_nl_ctl add "::ffff:10.0.2.1" flags signal
-run_tests $ns1 $ns2 "::ffff:10.0.1.1"
-chk_join_nr "signal address IPv4-mapped" 1 1 1
-chk_add_nr 1 1
-
-# subflow v4-map-v6
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-run_tests $ns1 $ns2 "::ffff:10.0.1.1"
-chk_join_nr "single subflow v4-map-v6" 1 1 1
-
-# signal address v4-map-v6
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl limits 1 1
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
-run_tests $ns1 $ns2 "::ffff:10.0.1.1"
-chk_join_nr "signal address v4-map-v6" 1 1 1
-chk_add_nr 1 1
-
-# subflow v6-map-v4
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl add "::ffff:10.0.3.2" flags subflow
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "single subflow v6-map-v4" 1 1 1
-
-# signal address v6-map-v4
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl limits 1 1
-ip netns exec $ns1 ./pm_nl_ctl add "::ffff:10.0.2.1" flags signal
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "signal address v6-map-v4" 1 1 1
-chk_add_nr 1 1
-
-# no subflow IPv6 to v4 address
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl add dead:beef:2::2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "no JOIN with diff families v4-v6" 0 0 0
-
-# no subflow IPv6 to v4 address even if v6 has a valid v4 at the end
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl add dead:beef:2::10.0.3.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "no JOIN with diff families v4-v6-2" 0 0 0
-
-# no subflow IPv4 to v6 address, no need to slow down too then
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-run_tests $ns1 $ns2 dead:beef:1::1
-chk_join_nr "no JOIN with diff families v6-v4" 0 0 0
-
-# single subflow, backup
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow,backup
-run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow nobackup
-chk_join_nr "single subflow, backup" 1 1 1
-chk_prio_nr 0 1
-
-# single address, backup
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
-ip netns exec $ns2 ./pm_nl_ctl limits 1 1
-run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup
-chk_join_nr "single address, backup" 1 1 1
-chk_add_nr 1 1
-chk_prio_nr 1 0
-
-# signal address with port
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl limits 1 1
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "signal address with port" 1 1 1
-chk_add_nr 1 1 1
-
-# subflow and signal with port
-reset
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
-ip netns exec $ns1 ./pm_nl_ctl limits 0 2
-ip netns exec $ns2 ./pm_nl_ctl limits 1 2
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "subflow and signal with port" 2 2 2
-chk_add_nr 1 1 1
-
-# single address with port, remove
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
-ip netns exec $ns2 ./pm_nl_ctl limits 1 1
-run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow
-chk_join_nr "remove single address with port" 1 1 1
-chk_add_nr 1 1 1
-chk_rm_nr 0 0
-
-# subflow and signal with port, remove
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 2
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
-ip netns exec $ns2 ./pm_nl_ctl limits 1 2
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow
-chk_join_nr "remove subflow and signal with port" 2 2 2
-chk_add_nr 1 1 1
-chk_rm_nr 1 1
-
-# subflows and signal with port, flush
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 0 3
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
-ip netns exec $ns2 ./pm_nl_ctl limits 1 3
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
-chk_join_nr "flush subflows and signal with port" 3 3 3
-chk_add_nr 1 1
-chk_rm_nr 2 2
-
-# multiple addresses with port
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 2 2
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal port 10100
-ip netns exec $ns2 ./pm_nl_ctl limits 2 2
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "multiple addresses with port" 2 2 2
-chk_add_nr 2 2 2
-
-# multiple addresses with ports
-reset
-ip netns exec $ns1 ./pm_nl_ctl limits 2 2
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal port 10101
-ip netns exec $ns2 ./pm_nl_ctl limits 2 2
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "multiple addresses with ports" 2 2 2
-chk_add_nr 2 2 2
-
-# single subflow, syncookies
-reset_with_cookies
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "single subflow with syn cookies" 1 1 1
-
-# multiple subflows with syn cookies
-reset_with_cookies
-ip netns exec $ns1 ./pm_nl_ctl limits 0 2
-ip netns exec $ns2 ./pm_nl_ctl limits 0 2
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "multiple subflows with syn cookies" 2 2 2
-
-# multiple subflows limited by server
-reset_with_cookies
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl limits 0 2
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "subflows limited by server w cookies" 2 2 1
-
-# test signal address with cookies
-reset_with_cookies
-ip netns exec $ns1 ./pm_nl_ctl limits 0 1
-ip netns exec $ns2 ./pm_nl_ctl limits 1 1
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "signal address with syn cookies" 1 1 1
-chk_add_nr 1 1
-
-# test cookie with subflow and signal
-reset_with_cookies
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
-ip netns exec $ns1 ./pm_nl_ctl limits 0 2
-ip netns exec $ns2 ./pm_nl_ctl limits 1 2
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "subflow and signal w cookies" 2 2 2
-chk_add_nr 1 1
-
-# accept and use add_addr with additional subflows
-reset_with_cookies
-ip netns exec $ns1 ./pm_nl_ctl limits 0 3
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
-ip netns exec $ns2 ./pm_nl_ctl limits 1 3
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1
-chk_join_nr "subflows and signal w. cookies" 3 3 3
-chk_add_nr 1 1
+if [ -z $1 ]; then
+ all_tests
+ exit $ret
+fi
+
+while getopts 'fsltra64bpch' opt; do
+ case $opt in
+ f)
+ subflows_tests
+ ;;
+ s)
+ signal_address_tests
+ ;;
+ l)
+ link_failure_tests
+ ;;
+ t)
+ add_addr_timeout_tests
+ ;;
+ r)
+ remove_tests
+ ;;
+ a)
+ add_tests
+ ;;
+ 6)
+ ipv6_tests
+ ;;
+ 4)
+ v4mapped_tests
+ ;;
+ b)
+ backup_tests
+ ;;
+ p)
+ add_addr_ports_tests
+ ;;
+ c)
+ syncookies_tests
+ ;;
+ h | *)
+ usage
+ ;;
+ esac
+done
exit $ret