| Message ID | 20210207151649.805359-1-arseny.krasnov@kaspersky.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | virtio/vsock: introduce SOCK_SEQPACKET support | expand |
On Sun, Feb 07, 2021 at 06:16:46PM +0300, Arseny Krasnov wrote: >This adds transport callback and it's logic for SEQPACKET dequeue. >Callback fetches RW packets from rx queue of socket until whole record >is copied(if user's buffer is full, user is not woken up). This is done >to not stall sender, because if we wake up user and it leaves syscall, >nobody will send credit update for rest of record, and sender will wait >for next enter of read syscall at receiver's side. So if user buffer is >full, we just send credit update and drop data. If during copy SEQ_BEGIN >was found(and not all data was copied), copying is restarted by reset >user's iov iterator(previous unfinished data is dropped). > >Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> >--- > include/linux/virtio_vsock.h | 5 + > include/uapi/linux/virtio_vsock.h | 16 ++++ > net/vmw_vsock/virtio_transport_common.c | 120 ++++++++++++++++++++++++ > 3 files changed, 141 insertions(+) > >diff --git a/include/linux/virtio_vsock.h b/include/linux/virtio_vsock.h >index dc636b727179..4d0de3dee9a4 100644 >--- a/include/linux/virtio_vsock.h >+++ b/include/linux/virtio_vsock.h >@@ -36,6 +36,11 @@ struct virtio_vsock_sock { > u32 rx_bytes; > u32 buf_alloc; > struct list_head rx_queue; >+ >+ /* For SOCK_SEQPACKET */ >+ u32 user_read_seq_len; >+ u32 user_read_copied; >+ u32 curr_rx_msg_cnt; > }; > > struct virtio_vsock_pkt { >diff --git a/include/uapi/linux/virtio_vsock.h b/include/uapi/linux/virtio_vsock.h >index 1d57ed3d84d2..cf9c165e5cca 100644 >--- a/include/uapi/linux/virtio_vsock.h >+++ b/include/uapi/linux/virtio_vsock.h >@@ -63,8 +63,14 @@ struct virtio_vsock_hdr { > __le32 fwd_cnt; > } __attribute__((packed)); > >+struct virtio_vsock_seq_hdr { >+ __le32 msg_cnt; >+ __le32 msg_len; >+} __attribute__((packed)); >+ > enum virtio_vsock_type { > VIRTIO_VSOCK_TYPE_STREAM = 1, >+ VIRTIO_VSOCK_TYPE_SEQPACKET = 2, > }; > > enum virtio_vsock_op { >@@ -83,6 +89,11 @@ enum virtio_vsock_op { > VIRTIO_VSOCK_OP_CREDIT_UPDATE = 6, > /* Request the peer to send the credit info to us */ > VIRTIO_VSOCK_OP_CREDIT_REQUEST = 7, >+ >+ /* Record begin for SOCK_SEQPACKET */ >+ VIRTIO_VSOCK_OP_SEQ_BEGIN = 8, >+ /* Record end for SOCK_SEQPACKET */ >+ VIRTIO_VSOCK_OP_SEQ_END = 9, > }; > > /* VIRTIO_VSOCK_OP_SHUTDOWN flags values */ >@@ -91,4 +102,9 @@ enum virtio_vsock_shutdown { > VIRTIO_VSOCK_SHUTDOWN_SEND = 2, > }; > >+/* VIRTIO_VSOCK_OP_RW flags values */ >+enum virtio_vsock_rw { >+ VIRTIO_VSOCK_RW_EOR = 1, >+}; >+ > #endif /* _UAPI_LINUX_VIRTIO_VSOCK_H */ >diff --git a/net/vmw_vsock/virtio_transport_common.c b/net/vmw_vsock/virtio_transport_common.c >index 5956939eebb7..4572d01c8ea5 100644 >--- a/net/vmw_vsock/virtio_transport_common.c >+++ b/net/vmw_vsock/virtio_transport_common.c >@@ -397,6 +397,126 @@ virtio_transport_stream_do_dequeue(struct vsock_sock *vsk, > return err; > } > >+static inline void virtio_transport_remove_pkt(struct virtio_vsock_pkt *pkt) >+{ >+ list_del(&pkt->list); >+ virtio_transport_free_pkt(pkt); >+} >+ >+static size_t virtio_transport_drop_until_seq_begin(struct virtio_vsock_sock *vvs) >+{ This function is not used here, but in the next patch, so I'd add this with the next patch. >+ struct virtio_vsock_pkt *pkt, *n; >+ size_t bytes_dropped = 0; >+ >+ list_for_each_entry_safe(pkt, n, &vvs->rx_queue, list) { >+ if (le16_to_cpu(pkt->hdr.op) == VIRTIO_VSOCK_OP_SEQ_BEGIN) >+ break; >+ >+ bytes_dropped += le32_to_cpu(pkt->hdr.len); >+ virtio_transport_dec_rx_pkt(vvs, pkt); >+ virtio_transport_remove_pkt(pkt); >+ } >+ >+ return bytes_dropped; >+} >+ >+static int virtio_transport_seqpacket_do_dequeue(struct vsock_sock *vsk, >+ struct msghdr *msg, >+ bool *msg_ready) >+{ Also this function is not used, maybe you can add in this patch the virtio_transport_seqpacket_dequeue() implementation. >+ struct virtio_vsock_sock *vvs = vsk->trans; >+ struct virtio_vsock_pkt *pkt; >+ int err = 0; >+ size_t user_buf_len = msg->msg_iter.count; >+ >+ *msg_ready = false; >+ spin_lock_bh(&vvs->rx_lock); >+ >+ while (!*msg_ready && !list_empty(&vvs->rx_queue) && !err) { >+ pkt = list_first_entry(&vvs->rx_queue, struct virtio_vsock_pkt, list); >+ >+ switch (le16_to_cpu(pkt->hdr.op)) { >+ case VIRTIO_VSOCK_OP_SEQ_BEGIN: { >+ /* Unexpected 'SEQ_BEGIN' during record copy: >+ * Leave receive loop, 'EAGAIN' will restart it from >+ * outer receive loop, packet is still in queue and >+ * counters are cleared. So in next loop enter, >+ * 'SEQ_BEGIN' will be dequeued first. User's iov >+ * iterator will be reset in outer loop. Also >+ * send credit update, because some bytes could be >+ * copied. User will never see unfinished record. >+ */ >+ err = -EAGAIN; >+ break; >+ } >+ case VIRTIO_VSOCK_OP_SEQ_END: { >+ struct virtio_vsock_seq_hdr *seq_hdr; >+ >+ seq_hdr = (struct virtio_vsock_seq_hdr *)pkt->buf; >+ /* First check that whole record is received. */ >+ >+ if (vvs->user_read_copied != vvs->user_read_seq_len || >+ (le32_to_cpu(seq_hdr->msg_cnt) - vvs->curr_rx_msg_cnt) != 1) { >+ /* Tail of current record and head of next missed, >+ * so this EOR is from next record. Restart receive. >+ * Current record will be dropped, next headless will >+ * be dropped on next attempt to get record length. >+ */ >+ err = -EAGAIN; >+ } else { >+ /* Success. */ >+ *msg_ready = true; >+ } >+ >+ break; >+ } >+ case VIRTIO_VSOCK_OP_RW: { >+ size_t bytes_to_copy; >+ size_t pkt_len; >+ >+ pkt_len = (size_t)le32_to_cpu(pkt->hdr.len); >+ bytes_to_copy = min(user_buf_len, pkt_len); >+ >+ /* sk_lock is held by caller so no one else can dequeue. >+ * Unlock rx_lock since memcpy_to_msg() may sleep. >+ */ >+ spin_unlock_bh(&vvs->rx_lock); >+ >+ if (memcpy_to_msg(msg, pkt->buf, bytes_to_copy)) { >+ spin_lock_bh(&vvs->rx_lock); >+ err = -EINVAL; >+ break; >+ } >+ >+ spin_lock_bh(&vvs->rx_lock); >+ user_buf_len -= bytes_to_copy; >+ vvs->user_read_copied += pkt_len; >+ >+ if (le32_to_cpu(pkt->hdr.flags) & VIRTIO_VSOCK_RW_EOR) >+ msg->msg_flags |= MSG_EOR; >+ break; >+ } >+ default: >+ ; >+ } >+ >+ /* For unexpected 'SEQ_BEGIN', keep such packet in queue, >+ * but drop any other type of packet. >+ */ >+ if (le16_to_cpu(pkt->hdr.op) != VIRTIO_VSOCK_OP_SEQ_BEGIN) { >+ virtio_transport_dec_rx_pkt(vvs, pkt); >+ virtio_transport_remove_pkt(pkt); >+ } >+ } >+ >+ spin_unlock_bh(&vvs->rx_lock); >+ >+ virtio_transport_send_credit_update(vsk, VIRTIO_VSOCK_TYPE_SEQPACKET, >+ NULL); >+ >+ return err; >+} >+ > ssize_t > virtio_transport_stream_dequeue(struct vsock_sock *vsk, > struct msghdr *msg, >-- >2.25.1 >
On Thu, Feb 11, 2021 at 02:54:28PM +0100, Stefano Garzarella wrote: >On Sun, Feb 07, 2021 at 06:16:46PM +0300, Arseny Krasnov wrote: >>This adds transport callback and it's logic for SEQPACKET dequeue. >>Callback fetches RW packets from rx queue of socket until whole record >>is copied(if user's buffer is full, user is not woken up). This is done >>to not stall sender, because if we wake up user and it leaves syscall, >>nobody will send credit update for rest of record, and sender will wait >>for next enter of read syscall at receiver's side. So if user buffer is >>full, we just send credit update and drop data. If during copy SEQ_BEGIN >>was found(and not all data was copied), copying is restarted by reset >>user's iov iterator(previous unfinished data is dropped). >> >>Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> >>--- >>include/linux/virtio_vsock.h | 5 + >>include/uapi/linux/virtio_vsock.h | 16 ++++ >>net/vmw_vsock/virtio_transport_common.c | 120 ++++++++++++++++++++++++ >>3 files changed, 141 insertions(+) >> >>diff --git a/include/linux/virtio_vsock.h b/include/linux/virtio_vsock.h >>index dc636b727179..4d0de3dee9a4 100644 >>--- a/include/linux/virtio_vsock.h >>+++ b/include/linux/virtio_vsock.h >>@@ -36,6 +36,11 @@ struct virtio_vsock_sock { >> u32 rx_bytes; >> u32 buf_alloc; >> struct list_head rx_queue; >>+ >>+ /* For SOCK_SEQPACKET */ >>+ u32 user_read_seq_len; >>+ u32 user_read_copied; >>+ u32 curr_rx_msg_cnt; >>}; >> >>struct virtio_vsock_pkt { >>diff --git a/include/uapi/linux/virtio_vsock.h b/include/uapi/linux/virtio_vsock.h >>index 1d57ed3d84d2..cf9c165e5cca 100644 >>--- a/include/uapi/linux/virtio_vsock.h >>+++ b/include/uapi/linux/virtio_vsock.h >>@@ -63,8 +63,14 @@ struct virtio_vsock_hdr { >> __le32 fwd_cnt; >>} __attribute__((packed)); >> >>+struct virtio_vsock_seq_hdr { >>+ __le32 msg_cnt; Maybe it's better 'msg_id' for this field, since we use it to identify a message. Then whether we use a counter or a random number, I think it's just an implementation detail. As Michael said, perhaps this detail should be discussed in the proposal for VIRTIO spec changes. >>+ __le32 msg_len; >>+} __attribute__((packed)); >>+ >>enum virtio_vsock_type { >> VIRTIO_VSOCK_TYPE_STREAM = 1, >>+ VIRTIO_VSOCK_TYPE_SEQPACKET = 2, >>}; >> >>enum virtio_vsock_op { >>@@ -83,6 +89,11 @@ enum virtio_vsock_op { >> VIRTIO_VSOCK_OP_CREDIT_UPDATE = 6, >> /* Request the peer to send the credit info to us */ >> VIRTIO_VSOCK_OP_CREDIT_REQUEST = 7, >>+ >>+ /* Record begin for SOCK_SEQPACKET */ >>+ VIRTIO_VSOCK_OP_SEQ_BEGIN = 8, >>+ /* Record end for SOCK_SEQPACKET */ >>+ VIRTIO_VSOCK_OP_SEQ_END = 9, >>}; >> >>/* VIRTIO_VSOCK_OP_SHUTDOWN flags values */ >>@@ -91,4 +102,9 @@ enum virtio_vsock_shutdown { >> VIRTIO_VSOCK_SHUTDOWN_SEND = 2, >>}; >> >>+/* VIRTIO_VSOCK_OP_RW flags values */ >>+enum virtio_vsock_rw { >>+ VIRTIO_VSOCK_RW_EOR = 1, >>+}; >>+ >>#endif /* _UAPI_LINUX_VIRTIO_VSOCK_H */ >>diff --git a/net/vmw_vsock/virtio_transport_common.c b/net/vmw_vsock/virtio_transport_common.c >>index 5956939eebb7..4572d01c8ea5 100644 >>--- a/net/vmw_vsock/virtio_transport_common.c >>+++ b/net/vmw_vsock/virtio_transport_common.c >>@@ -397,6 +397,126 @@ virtio_transport_stream_do_dequeue(struct vsock_sock *vsk, >> return err; >>} >> >>+static inline void virtio_transport_remove_pkt(struct virtio_vsock_pkt *pkt) >>+{ >>+ list_del(&pkt->list); >>+ virtio_transport_free_pkt(pkt); >>+} >>+ >>+static size_t virtio_transport_drop_until_seq_begin(struct virtio_vsock_sock *vvs) >>+{ > >This function is not used here, but in the next patch, so I'd add this >with the next patch. > >>+ struct virtio_vsock_pkt *pkt, *n; >>+ size_t bytes_dropped = 0; >>+ >>+ list_for_each_entry_safe(pkt, n, &vvs->rx_queue, list) { >>+ if (le16_to_cpu(pkt->hdr.op) == VIRTIO_VSOCK_OP_SEQ_BEGIN) >>+ break; >>+ >>+ bytes_dropped += le32_to_cpu(pkt->hdr.len); >>+ virtio_transport_dec_rx_pkt(vvs, pkt); >>+ virtio_transport_remove_pkt(pkt); >>+ } >>+ >>+ return bytes_dropped; >>+} >>+ >>+static int virtio_transport_seqpacket_do_dequeue(struct vsock_sock *vsk, >>+ struct msghdr *msg, >>+ bool *msg_ready) >>+{ > >Also this function is not used, maybe you can add in this patch the >virtio_transport_seqpacket_dequeue() implementation. > >>+ struct virtio_vsock_sock *vvs = vsk->trans; >>+ struct virtio_vsock_pkt *pkt; >>+ int err = 0; >>+ size_t user_buf_len = msg->msg_iter.count; >>+ >>+ *msg_ready = false; >>+ spin_lock_bh(&vvs->rx_lock); >>+ >>+ while (!*msg_ready && !list_empty(&vvs->rx_queue) && !err) { >>+ pkt = list_first_entry(&vvs->rx_queue, struct virtio_vsock_pkt, list); >>+ >>+ switch (le16_to_cpu(pkt->hdr.op)) { >>+ case VIRTIO_VSOCK_OP_SEQ_BEGIN: { >>+ /* Unexpected 'SEQ_BEGIN' during record copy: >>+ * Leave receive loop, 'EAGAIN' will restart it from >>+ * outer receive loop, packet is still in queue and >>+ * counters are cleared. So in next loop enter, >>+ * 'SEQ_BEGIN' will be dequeued first. User's iov >>+ * iterator will be reset in outer loop. Also >>+ * send credit update, because some bytes could be >>+ * copied. User will never see unfinished record. >>+ */ >>+ err = -EAGAIN; >>+ break; >>+ } >>+ case VIRTIO_VSOCK_OP_SEQ_END: { >>+ struct virtio_vsock_seq_hdr *seq_hdr; >>+ >>+ seq_hdr = (struct virtio_vsock_seq_hdr *)pkt->buf; >>+ /* First check that whole record is received. */ >>+ >>+ if (vvs->user_read_copied != vvs->user_read_seq_len || >>+ (le32_to_cpu(seq_hdr->msg_cnt) - vvs->curr_rx_msg_cnt) != 1) { >>+ /* Tail of current record and head of next missed, >>+ * so this EOR is from next record. Restart receive. >>+ * Current record will be dropped, next headless will >>+ * be dropped on next attempt to get record length. >>+ */ >>+ err = -EAGAIN; >>+ } else { >>+ /* Success. */ >>+ *msg_ready = true; >>+ } >>+ >>+ break; >>+ } >>+ case VIRTIO_VSOCK_OP_RW: { >>+ size_t bytes_to_copy; >>+ size_t pkt_len; >>+ >>+ pkt_len = (size_t)le32_to_cpu(pkt->hdr.len); >>+ bytes_to_copy = min(user_buf_len, pkt_len); >>+ >>+ /* sk_lock is held by caller so no one else can dequeue. >>+ * Unlock rx_lock since memcpy_to_msg() may sleep. >>+ */ >>+ spin_unlock_bh(&vvs->rx_lock); >>+ >>+ if (memcpy_to_msg(msg, pkt->buf, bytes_to_copy)) { >>+ spin_lock_bh(&vvs->rx_lock); >>+ err = -EINVAL; >>+ break; >>+ } >>+ >>+ spin_lock_bh(&vvs->rx_lock); >>+ user_buf_len -= bytes_to_copy; >>+ vvs->user_read_copied += pkt_len; >>+ >>+ if (le32_to_cpu(pkt->hdr.flags) & VIRTIO_VSOCK_RW_EOR) >>+ msg->msg_flags |= MSG_EOR; >>+ break; >>+ } >>+ default: >>+ ; >>+ } >>+ >>+ /* For unexpected 'SEQ_BEGIN', keep such packet in queue, >>+ * but drop any other type of packet. >>+ */ >>+ if (le16_to_cpu(pkt->hdr.op) != VIRTIO_VSOCK_OP_SEQ_BEGIN) { >>+ virtio_transport_dec_rx_pkt(vvs, pkt); >>+ virtio_transport_remove_pkt(pkt); >>+ } >>+ } >>+ >>+ spin_unlock_bh(&vvs->rx_lock); >>+ >>+ virtio_transport_send_credit_update(vsk, VIRTIO_VSOCK_TYPE_SEQPACKET, >>+ NULL); >>+ >>+ return err; >>+} >>+ >>ssize_t >>virtio_transport_stream_dequeue(struct vsock_sock *vsk, >> struct msghdr *msg, >>-- >>2.25.1 >>
diff --git a/include/linux/virtio_vsock.h b/include/linux/virtio_vsock.h index dc636b727179..4d0de3dee9a4 100644 --- a/include/linux/virtio_vsock.h +++ b/include/linux/virtio_vsock.h @@ -36,6 +36,11 @@ struct virtio_vsock_sock { u32 rx_bytes; u32 buf_alloc; struct list_head rx_queue; + + /* For SOCK_SEQPACKET */ + u32 user_read_seq_len; + u32 user_read_copied; + u32 curr_rx_msg_cnt; }; struct virtio_vsock_pkt { diff --git a/include/uapi/linux/virtio_vsock.h b/include/uapi/linux/virtio_vsock.h index 1d57ed3d84d2..cf9c165e5cca 100644 --- a/include/uapi/linux/virtio_vsock.h +++ b/include/uapi/linux/virtio_vsock.h @@ -63,8 +63,14 @@ struct virtio_vsock_hdr { __le32 fwd_cnt; } __attribute__((packed)); +struct virtio_vsock_seq_hdr { + __le32 msg_cnt; + __le32 msg_len; +} __attribute__((packed)); + enum virtio_vsock_type { VIRTIO_VSOCK_TYPE_STREAM = 1, + VIRTIO_VSOCK_TYPE_SEQPACKET = 2, }; enum virtio_vsock_op { @@ -83,6 +89,11 @@ enum virtio_vsock_op { VIRTIO_VSOCK_OP_CREDIT_UPDATE = 6, /* Request the peer to send the credit info to us */ VIRTIO_VSOCK_OP_CREDIT_REQUEST = 7, + + /* Record begin for SOCK_SEQPACKET */ + VIRTIO_VSOCK_OP_SEQ_BEGIN = 8, + /* Record end for SOCK_SEQPACKET */ + VIRTIO_VSOCK_OP_SEQ_END = 9, }; /* VIRTIO_VSOCK_OP_SHUTDOWN flags values */ @@ -91,4 +102,9 @@ enum virtio_vsock_shutdown { VIRTIO_VSOCK_SHUTDOWN_SEND = 2, }; +/* VIRTIO_VSOCK_OP_RW flags values */ +enum virtio_vsock_rw { + VIRTIO_VSOCK_RW_EOR = 1, +}; + #endif /* _UAPI_LINUX_VIRTIO_VSOCK_H */ diff --git a/net/vmw_vsock/virtio_transport_common.c b/net/vmw_vsock/virtio_transport_common.c index 5956939eebb7..4572d01c8ea5 100644 --- a/net/vmw_vsock/virtio_transport_common.c +++ b/net/vmw_vsock/virtio_transport_common.c @@ -397,6 +397,126 @@ virtio_transport_stream_do_dequeue(struct vsock_sock *vsk, return err; } +static inline void virtio_transport_remove_pkt(struct virtio_vsock_pkt *pkt) +{ + list_del(&pkt->list); + virtio_transport_free_pkt(pkt); +} + +static size_t virtio_transport_drop_until_seq_begin(struct virtio_vsock_sock *vvs) +{ + struct virtio_vsock_pkt *pkt, *n; + size_t bytes_dropped = 0; + + list_for_each_entry_safe(pkt, n, &vvs->rx_queue, list) { + if (le16_to_cpu(pkt->hdr.op) == VIRTIO_VSOCK_OP_SEQ_BEGIN) + break; + + bytes_dropped += le32_to_cpu(pkt->hdr.len); + virtio_transport_dec_rx_pkt(vvs, pkt); + virtio_transport_remove_pkt(pkt); + } + + return bytes_dropped; +} + +static int virtio_transport_seqpacket_do_dequeue(struct vsock_sock *vsk, + struct msghdr *msg, + bool *msg_ready) +{ + struct virtio_vsock_sock *vvs = vsk->trans; + struct virtio_vsock_pkt *pkt; + int err = 0; + size_t user_buf_len = msg->msg_iter.count; + + *msg_ready = false; + spin_lock_bh(&vvs->rx_lock); + + while (!*msg_ready && !list_empty(&vvs->rx_queue) && !err) { + pkt = list_first_entry(&vvs->rx_queue, struct virtio_vsock_pkt, list); + + switch (le16_to_cpu(pkt->hdr.op)) { + case VIRTIO_VSOCK_OP_SEQ_BEGIN: { + /* Unexpected 'SEQ_BEGIN' during record copy: + * Leave receive loop, 'EAGAIN' will restart it from + * outer receive loop, packet is still in queue and + * counters are cleared. So in next loop enter, + * 'SEQ_BEGIN' will be dequeued first. User's iov + * iterator will be reset in outer loop. Also + * send credit update, because some bytes could be + * copied. User will never see unfinished record. + */ + err = -EAGAIN; + break; + } + case VIRTIO_VSOCK_OP_SEQ_END: { + struct virtio_vsock_seq_hdr *seq_hdr; + + seq_hdr = (struct virtio_vsock_seq_hdr *)pkt->buf; + /* First check that whole record is received. */ + + if (vvs->user_read_copied != vvs->user_read_seq_len || + (le32_to_cpu(seq_hdr->msg_cnt) - vvs->curr_rx_msg_cnt) != 1) { + /* Tail of current record and head of next missed, + * so this EOR is from next record. Restart receive. + * Current record will be dropped, next headless will + * be dropped on next attempt to get record length. + */ + err = -EAGAIN; + } else { + /* Success. */ + *msg_ready = true; + } + + break; + } + case VIRTIO_VSOCK_OP_RW: { + size_t bytes_to_copy; + size_t pkt_len; + + pkt_len = (size_t)le32_to_cpu(pkt->hdr.len); + bytes_to_copy = min(user_buf_len, pkt_len); + + /* sk_lock is held by caller so no one else can dequeue. + * Unlock rx_lock since memcpy_to_msg() may sleep. + */ + spin_unlock_bh(&vvs->rx_lock); + + if (memcpy_to_msg(msg, pkt->buf, bytes_to_copy)) { + spin_lock_bh(&vvs->rx_lock); + err = -EINVAL; + break; + } + + spin_lock_bh(&vvs->rx_lock); + user_buf_len -= bytes_to_copy; + vvs->user_read_copied += pkt_len; + + if (le32_to_cpu(pkt->hdr.flags) & VIRTIO_VSOCK_RW_EOR) + msg->msg_flags |= MSG_EOR; + break; + } + default: + ; + } + + /* For unexpected 'SEQ_BEGIN', keep such packet in queue, + * but drop any other type of packet. + */ + if (le16_to_cpu(pkt->hdr.op) != VIRTIO_VSOCK_OP_SEQ_BEGIN) { + virtio_transport_dec_rx_pkt(vvs, pkt); + virtio_transport_remove_pkt(pkt); + } + } + + spin_unlock_bh(&vvs->rx_lock); + + virtio_transport_send_credit_update(vsk, VIRTIO_VSOCK_TYPE_SEQPACKET, + NULL); + + return err; +} + ssize_t virtio_transport_stream_dequeue(struct vsock_sock *vsk, struct msghdr *msg,
This adds transport callback and it's logic for SEQPACKET dequeue. Callback fetches RW packets from rx queue of socket until whole record is copied(if user's buffer is full, user is not woken up). This is done to not stall sender, because if we wake up user and it leaves syscall, nobody will send credit update for rest of record, and sender will wait for next enter of read syscall at receiver's side. So if user buffer is full, we just send credit update and drop data. If during copy SEQ_BEGIN was found(and not all data was copied), copying is restarted by reset user's iov iterator(previous unfinished data is dropped). Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> --- include/linux/virtio_vsock.h | 5 + include/uapi/linux/virtio_vsock.h | 16 ++++ net/vmw_vsock/virtio_transport_common.c | 120 ++++++++++++++++++++++++ 3 files changed, 141 insertions(+)