diff mbox series

[v8,bpf-next,5/5] xsk: build skb by page (aka generic zerocopy xmit)

Message ID 20210218204908.5455-6-alobakin@pm.me (mailing list archive)
State Accepted
Delegated to: BPF
Headers show
Series xsk: build skb by page (aka generic zerocopy xmit) | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for bpf-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 16 of 16 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 1 this patch: 1
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 158 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 1 this patch: 1
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Alexander Lobakin Feb. 18, 2021, 8:50 p.m. UTC
From: Xuan Zhuo <xuanzhuo@linux.alibaba.com>

This patch is used to construct skb based on page to save memory copy
overhead.

This function is implemented based on IFF_TX_SKB_NO_LINEAR. Only the
network card priv_flags supports IFF_TX_SKB_NO_LINEAR will use page to
directly construct skb. If this feature is not supported, it is still
necessary to copy data to construct skb.

---------------- Performance Testing ------------

The test environment is Aliyun ECS server.
Test cmd:
```
xdpsock -i eth0 -t  -S -s <msg size>
```

Test result data:

size    64      512     1024    1500
copy    1916747 1775988 1600203 1440054
page    1974058 1953655 1945463 1904478
percent 3.0%    10.0%   21.58%  32.3%

Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
[ alobakin:
 - expand subject to make it clearer;
 - improve skb->truesize calculation;
 - reserve some headroom in skb for drivers;
 - tailroom is not needed as skb is non-linear ]
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
---
 net/xdp/xsk.c | 120 ++++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 96 insertions(+), 24 deletions(-)

--
2.30.1
diff mbox series

Patch

diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
index 143979ea4165..a71ed664da0a 100644
--- a/net/xdp/xsk.c
+++ b/net/xdp/xsk.c
@@ -445,6 +445,97 @@  static void xsk_destruct_skb(struct sk_buff *skb)
 	sock_wfree(skb);
 }

+static struct sk_buff *xsk_build_skb_zerocopy(struct xdp_sock *xs,
+					      struct xdp_desc *desc)
+{
+	struct xsk_buff_pool *pool = xs->pool;
+	u32 hr, len, ts, offset, copy, copied;
+	struct sk_buff *skb;
+	struct page *page;
+	void *buffer;
+	int err, i;
+	u64 addr;
+
+	hr = max(NET_SKB_PAD, L1_CACHE_ALIGN(xs->dev->needed_headroom));
+
+	skb = sock_alloc_send_skb(&xs->sk, hr, 1, &err);
+	if (unlikely(!skb))
+		return ERR_PTR(err);
+
+	skb_reserve(skb, hr);
+
+	addr = desc->addr;
+	len = desc->len;
+	ts = pool->unaligned ? len : pool->chunk_size;
+
+	buffer = xsk_buff_raw_get_data(pool, addr);
+	offset = offset_in_page(buffer);
+	addr = buffer - pool->addrs;
+
+	for (copied = 0, i = 0; copied < len; i++) {
+		page = pool->umem->pgs[addr >> PAGE_SHIFT];
+		get_page(page);
+
+		copy = min_t(u32, PAGE_SIZE - offset, len - copied);
+		skb_fill_page_desc(skb, i, page, offset, copy);
+
+		copied += copy;
+		addr += copy;
+		offset = 0;
+	}
+
+	skb->len += len;
+	skb->data_len += len;
+	skb->truesize += ts;
+
+	refcount_add(ts, &xs->sk.sk_wmem_alloc);
+
+	return skb;
+}
+
+static struct sk_buff *xsk_build_skb(struct xdp_sock *xs,
+				     struct xdp_desc *desc)
+{
+	struct net_device *dev = xs->dev;
+	struct sk_buff *skb;
+
+	if (dev->priv_flags & IFF_TX_SKB_NO_LINEAR) {
+		skb = xsk_build_skb_zerocopy(xs, desc);
+		if (IS_ERR(skb))
+			return skb;
+	} else {
+		u32 hr, tr, len;
+		void *buffer;
+		int err;
+
+		hr = max(NET_SKB_PAD, L1_CACHE_ALIGN(dev->needed_headroom));
+		tr = dev->needed_tailroom;
+		len = desc->len;
+
+		skb = sock_alloc_send_skb(&xs->sk, hr + len + tr, 1, &err);
+		if (unlikely(!skb))
+			return ERR_PTR(err);
+
+		skb_reserve(skb, hr);
+		skb_put(skb, len);
+
+		buffer = xsk_buff_raw_get_data(xs->pool, desc->addr);
+		err = skb_store_bits(skb, 0, buffer, len);
+		if (unlikely(err)) {
+			kfree_skb(skb);
+			return ERR_PTR(err);
+		}
+	}
+
+	skb->dev = dev;
+	skb->priority = xs->sk.sk_priority;
+	skb->mark = xs->sk.sk_mark;
+	skb_shinfo(skb)->destructor_arg = (void *)(long)desc->addr;
+	skb->destructor = xsk_destruct_skb;
+
+	return skb;
+}
+
 static int xsk_generic_xmit(struct sock *sk)
 {
 	struct xdp_sock *xs = xdp_sk(sk);
@@ -454,56 +545,37 @@  static int xsk_generic_xmit(struct sock *sk)
 	struct sk_buff *skb;
 	unsigned long flags;
 	int err = 0;
-	u32 hr, tr;

 	mutex_lock(&xs->mutex);

 	if (xs->queue_id >= xs->dev->real_num_tx_queues)
 		goto out;

-	hr = max(NET_SKB_PAD, L1_CACHE_ALIGN(xs->dev->needed_headroom));
-	tr = xs->dev->needed_tailroom;
-
 	while (xskq_cons_peek_desc(xs->tx, &desc, xs->pool)) {
-		char *buffer;
-		u64 addr;
-		u32 len;
-
 		if (max_batch-- == 0) {
 			err = -EAGAIN;
 			goto out;
 		}

-		len = desc.len;
-		skb = sock_alloc_send_skb(sk, hr + len + tr, 1, &err);
-		if (unlikely(!skb))
+		skb = xsk_build_skb(xs, &desc);
+		if (IS_ERR(skb)) {
+			err = PTR_ERR(skb);
 			goto out;
+		}

-		skb_reserve(skb, hr);
-		skb_put(skb, len);
-
-		addr = desc.addr;
-		buffer = xsk_buff_raw_get_data(xs->pool, addr);
-		err = skb_store_bits(skb, 0, buffer, len);
 		/* This is the backpressure mechanism for the Tx path.
 		 * Reserve space in the completion queue and only proceed
 		 * if there is space in it. This avoids having to implement
 		 * any buffering in the Tx path.
 		 */
 		spin_lock_irqsave(&xs->pool->cq_lock, flags);
-		if (unlikely(err) || xskq_prod_reserve(xs->pool->cq)) {
+		if (xskq_prod_reserve(xs->pool->cq)) {
 			spin_unlock_irqrestore(&xs->pool->cq_lock, flags);
 			kfree_skb(skb);
 			goto out;
 		}
 		spin_unlock_irqrestore(&xs->pool->cq_lock, flags);

-		skb->dev = xs->dev;
-		skb->priority = sk->sk_priority;
-		skb->mark = sk->sk_mark;
-		skb_shinfo(skb)->destructor_arg = (void *)(long)desc.addr;
-		skb->destructor = xsk_destruct_skb;
-
 		err = __dev_direct_xmit(skb, xs->queue_id);
 		if  (err == NETDEV_TX_BUSY) {
 			/* Tell user-space to retry the send */