| Message ID | 20210222214641.2865493-1-f.fainelli@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [net] net: dsa: b53: Support setting learning on port | expand |
| Context | Check | Description |
|---|---|---|
| netdev/cover_letter | success | Link |
| netdev/fixes_present | fail | Series targets non-next tree, but doesn't contain any Fixes tags |
| netdev/patch_count | success | Link |
| netdev/tree_selection | success | Clearly marked for net |
| netdev/subject_prefix | success | Link |
| netdev/cc_maintainers | success | CCed 7 of 7 maintainers |
| netdev/source_inline | success | Was 0 now: 0 |
| netdev/verify_signedoff | success | Link |
| netdev/module_param | success | Was 0 now: 0 |
| netdev/build_32bit | success | Errors and warnings before: 0 this patch: 0 |
| netdev/kdoc | success | Errors and warnings before: 0 this patch: 0 |
| netdev/verify_fixes | success | Link |
| netdev/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 73 lines checked |
| netdev/build_allmodconfig_warn | success | Errors and warnings before: 0 this patch: 0 |
| netdev/header_inline | success | Link |
| netdev/stable | success | Stable not CCed |
On 2/22/2021 1:46 PM, Florian Fainelli wrote: > Add support for being able to set the learning attribute on port, and > make sure that the standalone ports start up with learning disabled. > > We can remove the code in bcm_sf2 that configured the ports learning > attribute because we want the standalone ports to have learning disabled > by default and port 7 cannot be bridged, so its learning attribute will > not change past its initial configuration. > > Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> > --- > David, Jakub, > > This is submitted against "net" because this is technically a bug fix > since ports should not have had learning enabled by default but given > this is dependent upon Vladimir's recent br_flags series, there is no > Fixes tag provided. > > I will be providing targeted stable backports that look a bit > difference. This is incorrect because I did not update the supported mask of BR_* bits that we support, v2 coming shortly.
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c index ae86ded1e2a1..261f6902abc3 100644 --- a/drivers/net/dsa/b53/b53_common.c +++ b/drivers/net/dsa/b53/b53_common.c @@ -543,6 +543,19 @@ static void b53_port_set_mcast_flood(struct b53_device *dev, int port, b53_write16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, mc); } +static void b53_port_set_learning(struct b53_device *dev, int port, + bool learning) +{ + u16 reg; + + b53_read16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, ®); + if (learning) + reg &= ~BIT(port); + else + reg |= BIT(port); + b53_write16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, reg); +} + int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy) { struct b53_device *dev = ds->priv; @@ -557,6 +570,7 @@ int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy) b53_port_set_ucast_flood(dev, port, true); b53_port_set_mcast_flood(dev, port, true); + b53_port_set_learning(dev, port, false); if (dev->ops->irq_enable) ret = dev->ops->irq_enable(dev, port); @@ -691,6 +705,7 @@ static void b53_enable_cpu_port(struct b53_device *dev, int port) b53_port_set_ucast_flood(dev, port, true); b53_port_set_mcast_flood(dev, port, true); + b53_port_set_learning(dev, port, false); } static void b53_enable_mib(struct b53_device *dev) @@ -1973,6 +1988,9 @@ static int b53_br_flags(struct dsa_switch *ds, int port, if (flags.mask & BR_MCAST_FLOOD) b53_port_set_mcast_flood(ds->priv, port, !!(flags.val & BR_MCAST_FLOOD)); + if (flags.mask & BR_LEARNING) + b53_port_set_learning(ds->priv, port, + !!(flags.val & BR_LEARNING)); return 0; } diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h index c90985c294a2..b2c539a42154 100644 --- a/drivers/net/dsa/b53/b53_regs.h +++ b/drivers/net/dsa/b53/b53_regs.h @@ -115,6 +115,7 @@ #define B53_UC_FLOOD_MASK 0x32 #define B53_MC_FLOOD_MASK 0x34 #define B53_IPMC_FLOOD_MASK 0x36 +#define B53_DIS_LEARNING 0x3c /* * Override Ports 0-7 State on devices with xMII interfaces (8 bit) diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 1857aa9aa84a..726edfe230df 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -223,23 +223,10 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port, reg &= ~P_TXQ_PSM_VDD(port); core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL); - /* Enable learning */ - reg = core_readl(priv, CORE_DIS_LEARN); - reg &= ~BIT(port); - core_writel(priv, reg, CORE_DIS_LEARN); - /* Enable Broadcom tags for that port if requested */ - if (priv->brcm_tag_mask & BIT(port)) { + if (priv->brcm_tag_mask & BIT(port)) b53_brcm_hdr_setup(ds, port); - /* Disable learning on ASP port */ - if (port == 7) { - reg = core_readl(priv, CORE_DIS_LEARN); - reg |= BIT(port); - core_writel(priv, reg, CORE_DIS_LEARN); - } - } - /* Configure Traffic Class to QoS mapping, allow each priority to map * to a different queue number */
Add support for being able to set the learning attribute on port, and make sure that the standalone ports start up with learning disabled. We can remove the code in bcm_sf2 that configured the ports learning attribute because we want the standalone ports to have learning disabled by default and port 7 cannot be bridged, so its learning attribute will not change past its initial configuration. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- David, Jakub, This is submitted against "net" because this is technically a bug fix since ports should not have had learning enabled by default but given this is dependent upon Vladimir's recent br_flags series, there is no Fixes tag provided. I will be providing targeted stable backports that look a bit difference. Thanks! drivers/net/dsa/b53/b53_common.c | 18 ++++++++++++++++++ drivers/net/dsa/b53/b53_regs.h | 1 + drivers/net/dsa/bcm_sf2.c | 15 +-------------- 3 files changed, 20 insertions(+), 14 deletions(-)